APRILIA SPORTCITY 250/ 200/ 125 STREET LEGAL EXHAUST SYSTEM Installation instructions


Filed Under (Aprilia) by admin on 26-10-2010

1. Put the motorcycle on a central stand. Make sure, that surface is solid and flat. 2. Unscrew the bolt from the metal clamp at the muffler – collector joint, all muffler brackets and remove the muffler (Figure 1, 2, 3, 4). T-handle 10mm wrench T-handle 12mm wrench T-handle 13mm wrench T-handle 5mm three hexagon key wrench Spring puller Figure 1 Figure 2 Figure 3 Figure 4
NAV – 333 3 INSTALLATION OF THE AKRAPOVIC SLIP-ON EXHAUST SYSTEM: 1. Insert the graphite gasket into the inlet bush of the link-pipe and correctly attach the metal clamp on the inlet bush of the link-pipe (Figure 5, 6). Slide the link pipe onto the stock collector (Figure 7, 8). Insert the catalytic converter into the link- pipe as shown (Figure 9, 10). Figure 5 Figure 6 Figure 7 Figure 8 Figure 9 Figure 10 NAV – 333 4 Figure 15 Figure 16 2. Slide the muffler onto the link-pipe and attach the springs (Figure 11, 12). Correctlyassemble the bolt, washer and aluminium distance bushe (Figure 13, 14). Tighten the bolts of muffler bracket and metal clamp (Figure 15, 16). 5.9Nm 4.3 ftlb 21Nm 15ftlb Figure 11 Figure 12 Figure 13 Figure 14 NAV – 333 5 final installation: 1. Clean grease spots: a. Muffler – titanium outer sleeve: use a soft cloth sprayed with a multi-purpose spray lubricant (WD-40 or equivalent). b. Carbon-fiber outlet cap: use a soft dry cloth. c. Stainless steel link pipe: use a soft cloth sprayed with a contact cleaner, then wipe with a soft dry cloth Cleaning will prevent spots from burning onto the surface. Do not use aggressive chemical cleaners, because they can damage the sticker.

Write a comment