APRILIA TUONO V4 R APRC Technical specifications


Filed Under (Aprilia) by admin on 16-11-2010

Engine type Aprilia longitudinal 65° V-4 cylinder, 4-stroke, liquid cooling system, double overhead camshafts (DOHC), four valves per cylinder Fuel Unleaded petrol Bore and stroke 78 x 52.3 mm Total engine apacity 999.6 cc Compression ratio 13:1 Maximum power at crankshaft 162 hp (119 kW) at 11,000 rpm Maximum torque at crankshaft 110 Nm at 9,000 rpm Fuel system Airbox with front dynamic air intakes. 4 Weber-Marelli 48-mm throttle bodies with 4 injectors and latest generation Ride-by-Wire engine management. Choice of three different engine maps selectable by the rider with bike in motion: T (Track), S (Sport), R (Road) Ignition Magneti Marelli digital electronic ignition system integrated in engine control system, with one spark lug per cylinder and “stick-coil” type coils Starting Electric Exhaust system 4 into 2 into 1 layout, single oxygen sensor, lateral single silencer with engine management system controlled butterfly valve and integrated trivalent catalytic converter (already meets future Euro4 regulations) Alternator Flywheel mounted 420W alternator with rare earth magnets Lubrication Wet sump lubrication system with oil radiator and two oil pumps (lubrication and cooling) Gearbox 6-speed cassette type gearbox 1st: 39/15 (2.600) 2nd: 33/16 (2.063) 3rd: 34/20 (1.700) 4th: 32/22 (1,455) 5th: 34/26 (1,308) 6th: 33/27 (1,222) Gear lever with Aprilia Quick Shift electronic system (AQS)
Clutch Multiplate wet clutch with mechanical slipper system rimary drive Straight cut gears and integrated flexible coupling, drive ratio: 73/44 (1,659) Secondary drive Chain: Drive ratio: 42/16 (2.625) Traction anagement APRC System (Aprilia Performance Ride Control), which includes Traction Control (ATC), Wheelie Control (AWC), Launch Control (ALC), all of which can be configured and deactivated independently. Frame Aluminium dual beam chassis with pressed and cast sheet elements. Sachs steering damper. Front suspension Sachs upside down front fork with Æ 43 mm stanchions. Low profile forged aluminium calliper mountings for radial callipers. Completely adjustable spring preload and hydraulic compression and rebound damping. Wheel travel: 120 mm

Comments are closed.