Titan 1500-XLT INSTALLATION, OPERATION, And MAINTENANCE MANUAL

0

Filed Under (Titan) by admin on 01-11-2010

download
UNPACKING AND SET-UP *REFER TO PARTS LIST FIG. 1 1. Carefully unpack the lift making sure that all of the parts have been included. 2. Remove the lift and all parts from delivery pallet and place on a clean, solid flat surface. 3. Take end of black hydraulic hose and attach to pneumatic/hydraulic pump (48). 4. Raise the lift with pump foot pedal (58) to expose the top of casters. Note: If the lift is not raising level, check to make sure that the wheels (42) are in their tracks. 5. Use the provided Allen wrench and place in top of casters (22) and turn it clock-wise. Raise all four casters until the lift rolls freely. 6. If using the front extension (9), slide the front extension over the front of the deck plate. Use the second and third connecting bars (5) and secure to the deck plate with the pipe guards (3), and R-pins (4), or use short connecting bar (68) without side extensions. 7. If using side extensions (7) then use the connecting bar (5) to assemble the side extensions (7) to the deck plate (8) securing them with the pipe guards (3) and R-pins (4). Slide the side extensions (7) to the deck plate (8). 8. Take ramp stands (43) and screw into bottom ramps (44) (45) and (46). Place the extension ramp (47) over matching holes on the center ramp (45). 9. Take the fixed clamp (10) and bolt to location “B” on the deck plate (8) or front extension (9) using bolts (11), washers (12), lock washers (13), and nuts (14) . 10. Take the movable clamp (16) and bolt to location “C” on the deck plate (8) or front extension (9) using bolts (11), washers (12), lock washers (13) and nuts (14). 11. Insert the tire stop (15) onto the fixed clamp (10) using the pin (60). 12. Place stands (1) on holes located on the end of the deck plate (8). 13. If you have access to compressed air, attach air nozzle to compressed air hose and raise the lift by pressing lever on air nozzle. Requires 70-160PSI. 14. If necessary, raise or lower the adjustment legs (6) to make the lift deck plate level with the ramps.