HARLEY DAVIDSON CHROME 4-CHANNEL LUGGAGE RACK INSTALLATION MANUAL

0

Filed Under (Harley Davidson) by admin on 24-02-2011

download
INSTALLATION Do not exceed luggage rack weight capacity. Too much weight can cause loss of control, which could result in death or serious injury. (00373a) NOTE Maximum luggage rack weight capacity is ten pounds (4.5 Kg). Luggage Rack Assembly 1. See Figure 1. Locate inner channels (1) by rounded cuts (2) on one end. Lay inner channels side by side on a flat table with the cutout end flush with the edge. Verify that the cutouts face outside in opposite directions. 2. See Figure 2. Place the backrest support slide bars (1) inside the inner channels with the tapped holes on the cutout end of the inner channels. 3. Separate spacers by their length, two 5/16 inch, four 3/4 inch and six 1-1/16 inch. Set two 5/16 inch spacers aside, they will be used later. 4. Position the four 3/4 inch spacers (2) inside the backrest support slide bars.

Comments are closed.