HARLEY DAVIDSON EDITION F 150 LIGHTNING HIGH PERFORMANCE INTAKE KIT INSTALLATION INSTRUCTIONS

0

Filed Under (Harley Davidson) by admin on 22-04-2012

download
Turn off ignition and remove negative battery connection. 2. Loosen the hose clamp on the OEM intake. 3. Disconnect the MAF sensor off intake 4. Pull out air temp sensor and then pull out intake unit. 5. Install NPT hose barbs in the cold air intake with the 1/4″ in the center position. 9.Connect the hoses to the S&B intake tube 6. Put the 4.5x2hose adapter with #72 hose clamps on the S&B tube . 10. Install the S&B intake on the throttle body, push the air temp sensor into the tube 7. Locate the three vacuum hoses 11. Remove the air box grommets and use the 1/4″-20″ speed nuts 8. Place the small sections of 5/8″ hose on the vacuum hoses. 12. Install the hose adapter onto the MAF sensor assembly

Write a comment