Harley Davidson Motorcycle 1982-2009 Standard Signal Mirror Kit INSTALLATION


Filed Under (Harley Davidson) by admin on 23-02-2012

Remove the 5/ 16 ” bolt from the mounting stem on the Signal® mirror. While seated on the motorcycle, position the Signal® mirror on the handle bar. Secure the Signal® mirror to the handle bar using the 5/ 16 ” bolt. NOTE: Use of oil is suggested if bolts do not thread easily into stem base. Make sure the bolt is tight! Guide the Signal® mirror wire harness into the cowling by going along side the existing factory wire harness. 4 Remove any slack in the wire harness. Secure the wire harness to the handle bar using a supplied tie wrap. 5 6 Adjust the position of the Signal® mirror and tighten the ball retention screws. Start on either the left or right side mirror. These instructions start with the right side mirror. Remove the factory mirror. NOTE: For motorcycles with OEM forward facing indicators, please use the instructions on the last page in lieu of step 2.

Write a comment