HARLEY DAVIDSON MOTORCYCLE SIREN INSTALLATION AND OPERATING INSTRUCTIONS

0

Filed Under (Harley Davidson) by admin on 15-03-2012

download
Before attempting installation, insure that the parts shown in the Kit Contents List (paragraph D.) have been included. To install the chassis, proceed as follows: 1. Insert two shock mount grommets into the large holes in each (2) mounting bracket (see figure 1). 2. Secure a mounting bracket to the chassis with two (each) #10 thread forming hex. head screws and #10 flat washers as shown in figure 1. Secure the other mounting bracket with like hardware. 3. Select a mounting location on the radio mounting platform which allows the siren cable to reach the motorcycle wiring harness, maintains the structural integrity of the motorcycle, and will not interfere with the safe operation of the motorcycle or the siren. 4. Using the supplied mounting template, scribe four drill position marks at the selected mounting location. CAUTION To avoid damage when drilling, ensure that both sides of mounting surface are clear of any parts or wires

Write a comment