Filed Under (Harley Davidson) by admin on 26-03-2011

REMOVAL Direct contact of D.O.T. 4 brake fluid with eyes can cause irritation. Avoid eye contact. In case of eye contact flush with large amounts of water and get medical attention. Swallowing large amounts of D.O.T. 4 brake fluid can cause digestive discomfort. If swallowed, obtain medical attention. Use in well ventilated area. KEEP OUT OF REACH OF CHILDREN. (00240a) D.O.T. 4 brake fluid will damage painted and body panel surfaces it comes in contact with. Always use caution and protect surfaces from spills whenever brake work is performed. Failure to comply can result in cosmetic damage. (00239b) 1. Remove the brake caliper and pad following the instructions in the service manual. Discard pin and clip. For Kit 41852-08A: Discard brake pads. INSTALLATION Always replace brake pads in complete sets for correct and safe brake operation. Improper brake operation could result in death or serious injury. (00111a) Prepare the Replacement Brake Pads 1. Remove paper backing from the mask. 2. See Figure 2. Carefully align and apply the mask (1) to the non-friction side of the brake pad (Figure 1, Item 2). NOTES Gloves are recommended when applying the brake pad paste to keep hands clean. 3. See Figure 4. Apply paste (6) in the mask holes until the holes are filled with paste. NOTE To prevent brake paste from transferring to other surfaces, do not apply paste thicker than specified. 4. See Figure 3. Wipe away excess paste with scraper (1) until the paste is the same thickness as the mask (2)

Comments are closed.