Filed Under (Harley Davidson) by admin on 14-04-2011

INSTALLATION 1. Install the grab strap (4) with the seat mounting studs (A) through the inner grab strap holes (F). 2. Refer to solo seat instruction sheet for installation of rider seat (C) and backrest (D). 3. Install the mounting nuts (E). 4. Tighten nuts snugly. 5. Slide slots on leading edge of passenger pillion (1) onto seat mounting studs (A) while sliding the pillion through the grab strap. 6. Install mounting screw (B) from stock seat through the mounting tab and tighten to 36-60 in-lbs (4-7 Nm) . After installing seat, pull upward on seat to be sure it is locked in position. While riding, a loose seat can shift causing loss of control, which could result in death or serious injury. (00070b) 7. Pull on seat and pillion to verify they are securely installed. SERVICE PARTS C E 1 B 2 D 4 A F is05690a Figure 1. Service Parts: Pillion Kit Table 1. Service Parts Table Part Number Description (Quantity) Item Not Sold Separately Pillion 1 51652-97A Mounting tab 2 3588 Mounting tab screw (2) (not shown) 3 51863-09 Grab strap 4 Items mentioned in text, but not included in kit: Mounting stud (2) A 2952A Stock screw B 51700-09 Signature Series Solo Seat Kit (purchased separately) includes Items C-E Seat C Backrest D 3638 Mounting nut (2) E Inner grab strap mounting holes

Comments are closed.