2010 RIDGELINE MOTORCYCLE BED EXTENDER INSTALLATION AND REMOVAL

0

Filed Under (Honda) by admin on 26-11-2011

download
Using an awl, pierce through the seals in the holes on the left side bed lining Install the left latch to the left side bed lining with three hex bolts While wearing eye protection, drill a 3 mm hole at the mark on the left side of the tailgate. Widen the hole with a 8 mm drill bit. To prevent damage to the inner vehicle parts, wrap a tape around the drill bit tip to the root in the measurement as shown. Remove any burrs Align the non-threaded wedge with the threaded wedge at three joints between the left and center tubes, then secure the wedges with one T-20 torx screw each.

Write a comment