HONDA CBR 600 RR AKRAPOVIC CARBON-FIBER PARTS installation instructions

0

Filed Under (Honda) by admin on 03-11-2011

download
INSTALLATION OF THE AKRAPOVIC CARBON-FIBER FRONT FENDER:
1. Make sure that the engine and the heated parts of the bike are cold before carrying out the following instructions.
2. Position the motorcycle on a side stand (we recommend a racing stand). Make sure, that surface is solid and flat.
3. Unscrew and remove bolts A on both sides of the motorcycle (Figure 1) ; unscrew the brake lines on both sides of
the motorcycle (Figure 2) and remove stock fender (Figure 3).
4. Reposition collars C and rubber mounts B (Figure 4, 5) from stock fender to Akrapovic carbon fiber fender
. Position the Akrapovic carbon-fiber fender in its location on the motorcycle, using stock bolts A (Figure 7, 8), re-
attach the brake lines on both sides of the motorcycle (Figure 9). Make sure that carbon-fiber fender is centered with
respect to the motorcycle and tighten bolts A securely

Incoming search terms:

Write a comment

Incoming search terms: