2005-2007 Kawasaki 610 Mule Winch Mount Installation Instructions

0

Filed Under (Kawasaki) by admin on 25-10-2010

download
1. Remove the plastic lower front cover. 2. Remove the two bolts on the left side mud shield that connect to the frame for easier access. 3. Install the winch to the winch mount using the hardware supplied with the winch. 4. Install the winch and mount per the illustration using the provided U-Bolts, flat washers and nuts around the frame tubes and through the mount. Tighten all nuts and bolts securely. 5. Install the roller fairlead to the winch mount using (2) 5/16″ x 3/4″ bolts and 5/16″ nylock nuts provided. (Rollers should turn freely. NOTE: Bottom roller may need to be removed to run wire rope through. 6. Using the instructions provided with the winch, wire accordingly. 7. Reinstall the two bolts from the mud shield. 8. Reinstall the plastic lower front cover. NOTE: For some winches, this cover may need to be trimmed so it does not rub

Incoming search terms:

Write a comment

Incoming search terms: