Kawasaki Mule 2003 and newer Plow Mounting Kit INSTALLATION INSTRUCTIONS


Filed Under (Kawasaki) by admin on 01-05-2012

Prior to installing the plow mount the vehicle must be prepped. If not already done so, install a WARN winch kit. Roller fairlead that comes with the winch kit does not need to be installed. This kit comes with a special fairlead to be used with plow. 2. Begin by locating and removing the two rear bumper mounting bolts. See Figure 1 and 2. Figure 1 Location of bumper bolts to remove Figure 2 Remove bumper bolts, both sides Location of bolt to remove WARN® INDUSTRIES PAGE 5 72171 Rev A0 4. Loosely install the mounting brackets to the vehicle using the 7/16″ hardware in the rear replacing the bumper mounting hardware removed in step 2. Do not tighten. See Figure 4 and 5

Write a comment