Kymco xciting 500 Installation And Removal Manual

0

Filed Under (Kymco) by admin on 04-05-2012

download
Refer to diagram for bracket identification 1. Place scooter in a secure upright position. 2. Remove center stand and underseat storage compartment 3. Attach bracket E to center stand mounting brackets using new bolts provided 4. Use jack underneath scooter to support scooter weight and remove left rear shock bolts. 5. Attach bracket C (left) to top of left rear shock tower using new bolt provided. Insert bolt through bracket, top of rear shock, and thread into shock tower. Reattach left lower shock bolt and tighten at this time. 6. Remove right rear shock bolts and attach bracket D (right) to top of right rear shock tower using new bolt provided. Insert bolt through bracket, top of rear shock, and thread into shock tower. Reattach right lower shock bolt and tighten at this time. 7. Ensure shock bolts are replaced and remove jack from step 4. 8. Attach wheels and axles to MiniTrike frame and carefully position in proper relation behind scooter. 9. Attach bottom of brackets C/D to rear mounting plate on MiniTrike frame 10. Attach brackets A (left) / B (right) to forward mounting points on MiniTrike frame.

Write a comment