1994 honda vt1100 cdi unit

You search Auto repair manual PDF 1994 honda vt1100 cdi unit, if there are search results will appear below. If search results do not exist, please search by others keyword.



  1994 honda vt1100 cdi unit Direct Download speed 5282 Kb/s

  1994 honda vt1100 cdi unit Full Version speed 6162 Kb/s



Honda Motorcycle Digital Audio System Owner's Manual

0

Filed Under (Honda) by admin on 22-11-2010

download
Applicable portable audio unit A commercially available portable audio player with a stereo mini jack terminal can be connected to this accessory. (An attachment kit designed for the model is necessary to connect the portable audio player to this accessory.) American Honda Motor Co., Inc. recommends you use a shock-resistant portable audio player such as a flash-memory player (e.g. MP3, etc.) or an MD player equipped with sound skip prevention function. American Honda Motor Co., Inc. also recommends you always ride your motorcycle safely on paved roads, because sound skip can occur during riding on rough roads. Refer to the following instructions on storage and handling of the portable audio unit. This accessory is not designed to operate the portable audio unit connected to the accessory. Refer to the portable audio unit manufacturer’s Owner’s Manual for how to operate the portable audio unit and operate it accordingly. Note that the warranty of this accessory does not cover function and failure of the portable audio unit connected to the accessory 5 Storage of portable audio unit connected to this accessory After connecting the digital audio system, put the portable audio unit in a stable place where it does not interfere with riding the motorcycle (e.g. in the sold separately front pouch, tank belt pocket, etc.) in a place free from vibration as much as possible. Do not place the portable audio unit in your pockets or clothes while connected to this accessory. The portable audio unit can vibrate and contact other materials while riding, causing a sound skip. To prevent such skips, store the portable audio unit in a suitable place while protecting it from vibration and shock by covering it with cushioning material. (Protect the remote control and peripheral devices as well as the portable audio unit.) Any system failure and damage to the portable audio unit and its peripheral devices are not covered by the warranty of this accessory.

Incoming search terms:

Kawasaki GEN2 CDI Installation And Removal Instructions

0

Filed Under (Kawasaki) by admin on 25-10-2010

download
Installation: Step 1: Remove the seat to allow access to the factory CDI igniter on the utility machine. See Figure 1. The KFX-700 (V-Force) CDI is located on the right frame rail by the rear tire. The Teryx CDI is located under the driver’s seat, inside the electrical box. See Figure 2. Disconnect the negative battery cable. Locate the stock CDI (located under the seat). Disconnect the connectors from the CDI, and remove the CDI. NOTE: If your machine has had a timing offset key installed (aftermarket equipment), then the timing maps need to be adjusted using the optional USB Memory Interface. The CDI is shipped assuming 5 degrees static timing, and increasing this with an offset key without compensating the maps may lead to engine damage. Figure 1: Figure 2: Step 2: Remove the two #4×4-40 screws from the DB44 connector at the front of the CDI. Plug the Copperhead® wiring harness into the DB44 connector, and secure with the two #4×4-40 screws. The screws should be snug, but do not over tighten. Plug connectors from the Copperhead® CDI to their corresponding connector on the chassis wiring harness. The Copperhead® CDI will be mounted 90 degrees (1/4 turn) from the stock position in most applications. This will allow it to sit between the stock mounting tabs on the pan. See Figure 3 for the BF750i installation and Figure 4 for the Teryx installation. Test fit the unit, and mark the necessary mounting holes. The KFX-700 (V-Force) will require holes to be drilled in the frame to mount the CDI

Incoming search terms:

Honda Motorcycle Na vigation Kit

0

Filed Under (Honda) by admin on 28-11-2010

download
Honda Motorcycle Na vigation Kit Honda Motorcycle Navigation Kit G e n e r i c A c c e s s o r i e s 2 0 0 8 For your peace of mind Honda Genuine Accessories are carefully designed, researched and stringently test ed tot he highest standards. And since they’re all Honda approved you’llknowthat they’rejustastoughand well made as your Honda motorcycle. Please Note -All prices quoted are correct at time of printing and are subject to change without prior notice. y e a r w a r r a n t y GENUINE ACCESSORIES Honda Motorcycle Navigation Kit Model Part Number Description RRP Remarks NAKED CBF 600 08A 40MER800B CONTAINSNAVI GAT ION UNIT COMPONENT, CONTROLLER, £549.99 EARPHONE, MANUAL, MCC AR KIT, UN I TAT TACHM ENT KIT, BATTERY CBF 600 08A 40MER800A CONTAINSNAVI GAT ION UNIT COMPONENT, CONTROLLER, £549.99 EARPHONE, MANUAL, MCC AR KIT, UN I TAT TACHM ENT KIT, BATTERY ON/OFF XL700V 08A 40MFF800 * CONTAINS NA VI GAT ION UNIT COMPONENT, £549.99 Must be combined with quartet harness CONTROLLER, EARPH ONE, MANUAL, 08A 30MFF800 MCCAR KIT, UNI TAT TACH ME NT KIT, BATTERY XL 1000V 08A 40MBT800 CONTAINSNAVI GAT ION UNIT COMPONENT, £549.99 Must be combined with quartet harness CONTROLLER, EAR PH ONE, MANUAL, 08A 30MBT800 MCCAR KIT, UNI TAT TACH ME NT KIT, BATTERY TOURERS/SPORT TOUR ERS DN-01 08A 40MEH800 CONTAINSNAVI GAT ION UNIT COMPONENT, CONTROLLER, EARPHONE, £549.99 Must be combined with quartet harness MANUAL, MC CAR KIT, UNI TAT TACH MEN T KIT, AND BATTERY -CONTAINS 08A 30MEW800 ADDITIONALSTE ERIN G HANDLE C LAMPS FORV ISU AL INTE GRAT ION OF THE COMPONENT NT700V 08A 40MEW800 CONTAINSNAVI GAT ION UNIT COMPONENT, CONTROLLER, EARPHONE, £549.99 Must be combined with quartet harness MANUAL, MC CAR KIT, UNI TAT TACH MEN T KIT, BATTERY

Incoming search terms:

2001-2004 HONDA GL1800/A Trunk Opener Unit Removal/ Installation instructions

0

Filed Under (Honda) by admin on 29-01-2011

download
come customers may experience trunk or saddlebag lids not opening when the corresponding latch lever is pulled. To correct this condition, the opener mechanism must be replaced with a new opener mechanism. Follow the Trunk Opener Unit Removal/Installation instructions in the GL1800/A Gold Wing Service Manual. Opener Unit P/N: 81310-MCA-A22 H/C: 7700768 The normal GL1800/A warranty applies. Follow all normal warranty procedures and guidelines. Labor Operation: 412122 Flat Rate Time: 0.6 If you feel that goodwill consideration is appropriate, contact your District Service Manager or TechLine BEFORE starting this repair. 2001-2004 GL1800/A Trunk Opener Unit MTB 10535 (0403) GL1800/A #15 MAY 2004 REPAIR PROCEDURE PARTS INFORMATION WARRANTY INFORMATION QUESTIONS PART DESCRIPTION TRUNK OPENER UNIT

Incoming search terms:

Honda Shadow Aero 750 Turn Signal Cancellation Unit Installation Procedures

0

Filed Under (Honda) by admin on 29-11-2010

download
Left TurnSignal Right TurnSignal Turn Signal Switch (for ref. Only) CIRCUIT CONNECTIONS AFTER INSTALLATION of Cancellation Unit Original+12 volts motorcycle supply power for flasher Ground (thiswiredoesnot exist on all models) Output to switch Power Power Red Yellow Gray Green Ground Green/Red Blue/Red Turn Signal Cancellation Unit Identify the positive power wire to the turn signal flasher. A test light with the probe touched to this wire will stay on steady and flash with the turn signals. Cut the wire and install the connectors observing the polarity as shown. Connect the Red and Yellow wires as shown. not Identify the flasher output wire to the signal switch and attach the gray wire by soldering or use the supplied red tap connector. Place the unit in a suitable area on your particular motorcycle. It is suggested under the seat providing access to the turn signal flasher. Connect the units ground (green) wire to frame (neg) ground Assure it’sareliable connection. IF THE GROUND WIRE BECOMES DISCONNECTED THE UNIT WILL BURN UP. using the supplied ring terminal. Identify the brake light circuit per the motorcycle wiring diagram. Using a test light verify the correct circuit using the following procedure. Connect the test light alligator clip (negative side) to frame ground. Using the positive tip probe the circuit. The proper circuit will illuminate the the brake is applied. Attach the Green/Red wire to this circuit. test light when The factory cancellation time is set at approximately 23 flashes. The length of time for cancellation can be decreased to approximately 15 counts by setting the program listed in the programming box

Incoming search terms:

HONDA CB650/ 750F/ 900F/ 1100F/ GL1100 Spark Unit Set Installation Manual

0

Filed Under (Honda) by admin on 05-04-2011

download
INSTALLATION INSTRUCTIONS: 1. All connections must be of the highest quality, use crimped or soldered connections; twisted wires will not give a satisfactory operation. 2. Remove the seat and/or petrol tank to gain access to the original spark units (if fitted); these are normally fitted under the seat between the top frame tubing. Each of these units consists of a small alloy metal box with sleeved wires terminated by a small connector (coupler). They also have a mounting tab with a single fixing hole. 3. On four cylinder machines there will be two units, normally mounted back to back; one for cylinders 1&4 and one for cylinders 2&3. 4. For safety, disconnect the battery. 5. Unplug the couplers from each of the units. Undo the fixings and remove the units. 6. Fit the new spark units in the place of the old ones or find a suitable alternative, close to the connectors. Secure the units to the frame or mounting platform using the supplied tie-straps and adhesive mounting base (if required). If required, a thin sheet of rubber or double-sided tape can be used to keep the units in position. Do not completely wrap the units in foam rubber. 7. Push the wiring harness plugs into the new spark unit socket connectors; they will only fit one way. Reconnect the battery. 8. If you are rewiring the machine or do not have the standard wiring harness, the spark unit wire colours & functions are as follows: GREEN Ö GROUND (0 VOLTS) BLACK/WHITE Ö IGNITION SUPPLY (+12 VOLTS) VIA ENGINE STOP SWITCH YELLOW Ö IGNITION COIL OUTPUT (TO COIL —) WHITE Ö PULSE GENERATOR (WHITE RING) BLUE Ö PULSE GENERATOR (UNMARKED) There are two pulse generators, one for cylinders 1&4 and one for cylinders 2&3. The left hand one is normally for cylinders 1&4 (see fig.1). There are two wires of the same colour coming from each pulse generator, one of these wires is normally marked with a white band. The pulse generator wire with the white band connects to the white wire from the corresponding spark unit, the other pulse generator wire connects to the blue wire on the corresponding spark unit. If the white band is missing, this is normally the upper wire coming from the pulse generator. 9. Refit the seat and tank (if removed earlier). 10. Fitting is now complete, although for best results you may wish to verify the ignition timing, see the following guide

Incoming search terms:

2001-2002 HONDA GL1800/A CD Changer Replacement

0

Filed Under (Honda) by admin on 03-03-2011

download
2001-2002 GL1800/A CD Changer Replacement ORDERING AND REPLACING THE CD CHANGER 1. Before calling the CD Changer Order Desk, have the following information ready: • VIN • Failure Information (i.e., symptom) • Warranty Status 2. To order, call the CD Changer Order Desk toll free: (888) 997-7278 . The CD Changer Order Desk hours are Monday thru Friday, 8:30am – 8:00pm EST. Part Number: 08A06-MCA-100RM Honda Code: 7097009 3. After calling the CD Changer Order Desk, an exchange CD Changer will be shipped overnight (freight prepaid). 4. Replace the faulty CD Changer with the exchange unit (see REPAIR PROCEDURE ). DO NOT remove the faulty CD Changer until you receive the exchange unit. DO NOT ATTEMPT TO REMOVE ANY STUCK CD’S. CHANGERS DAMAGED IN THIS WAY WILL BE RETURNED TO THE DEALER AND NO CORE CREDIT WILL BE ALLOWED. You will be billed $300.00 for the replacement unit. You must return the faulty CD Changer for a core credit and file a warranty claim to receive your total reimbursement (see TRANSACTION SUMMARY on page 3 for details). REPAIR PROCEDURE 1. Refer to the Installation Instructions included with the replacement CD Changer. 2. NOTE: You MUST remove the shipping bracket from the replacement unit before you complete the installation. If a CD is stuck inside the faulty unit, leave it there : • The vendor needs it for diagnosing and testing. • If you try to remove it, you’ll damage the unit. • The vendor will return the unit if it has been damaged during attempted CD removal. Fill in the customer information on the Audio System Diagnosis and Core Return form. The vendor will remove the CD and mail it back to the customer. IDENTIFICATION No identification is necessary for this repair

Incoming search terms:

1994-1998 HONDA RVF400RR Racing Kit INSTALLATION

0

Filed Under (Honda) by admin on 01-12-2011

download
(1)Fuel High Octane white gasoline (2)Engine Oil Recommended Oil: HONDA Ultra-GP (for four-cycle Motorbike) SAE20W-50 or 10W-40
Full Capacity: 3.0Liter (5.28pt) Oil Exchange: 2.5Liter (4.4pt) Filter Exchange: 2.4Liter (4.224pt) (3)Spark Plug NGK R 847-10(11)(4)Cooling Water Highly recommend checking the water level on each ignition/riding. Ingredient: Tapped water or Drinking water I. Unscrew a radiator cap. Apply water up to limb of intake. II. Hold steering and heave the body two or three times to let air out. III.Add water if necessary. IV. Screw the cap tighten.V. Start Engine then check water level again. Add water if necessary. < Notes for racing condition> • Keep your attention when you re-check the water level since the water would spill out of intake. Also cover the body with wastes. • Drain cooling water in a catch-tank before riding. • Drain whole water in a radiator after riding. It avoids corrosion or clog of components. • It is admitted adding coolant in winter season. Handle carefully when you apply them. It makes the circuit slippery if it drops or spilled.

TOYOTA SPECIALTY AND REPLACEMENT PARTS

0

Filed Under (Toyota Manuals) by admin on 30-09-2011

download
73-3844 Replaces: 3977775, 3078511 CLIP -HOOD INSULATION Head Dia.: 2″ Length: 3/4″ G.M. ’64/ UNIT PACKAGE 100 79-5126 Replaces: 20064875 CLIP -HOOD INSULATION Head Dia.: 1 21/32″ Length: 3/4″ G.M. ’78/ UNIT PACKAGE 50 79-5127 Replaces: 20030401 CLIP -HOOD INSULATION Head Dia.: 1 3/8″ Length: 1″ G.M. ’80/ UNIT PACKAGE 50 79-5100 Replaces: 388908-S RETAINER -HOOD INSULATION Head Dia.: 1-3/4″ Ford ’80/ UNIT PACKAGE 100 74-3945 Replaces: 385330-S, 6003351 FASTENER -HOOD INSULATION Ford & Chrysler Products ’73/ AMC 4005513 ’76 UNIT PACKAGE 100 92-7067 Replaces: 15678493, 21039141 RETAINER -HOOD INSULATION Head Dia.: 1-9/16″ Length: 1/2″, Hole: 1/4″ Plastic Saturn ’91/ UNIT PACKAGE 25 67-3119 Replaces: 389809, C6GY-16776-A CLIP -HOOD INSULATION RETAINER 1-1/2″ x 1-1/2″ Plastic G.M., Ford Products UNIT PACKAGE 50 72-3718 Replaces: 389089 FASTENER -HOOD INSULATION 2″ x 2″ Plastic G.M. Cars UNIT PACKAGE 50 99-8032 Replaces: 385595-S, 386553-S RETAINER -HOOD INSULATION Plastic Formerly 74-3944 For Heavier Type Insulation Head: 1-3/16 Ford ’74/ UNIT PACKAGE 50 95-7382 Replaces: N-803613-S RETAINER -HOOD INSULATION Hole: 1/4″, Head: 1-3/4″ Stem Length: 7/8″ Plastic Ford Explorer ’91/, Taurus, Sable, Mustang, Continental ’92/ UNIT PACKAGE 50 95-7369 Replaces: W700671-S300 RETAINER -HOOD INSULATION Head Dia.: 25MM, Hole: 8MM Black Plastic Ford Contour & Mercury Mystique ’95/ UNIT PACKAGE 15 96-7577 Replaces: 01644290, 15678979, 01553-0075U RETAINER -SPEAKER, DOOR SILL, BUMPER, HOOD INSULATOR Black Plastic Hole: M6, Barb Length: 12MM Head Dia.: 11MM, O/L: 19MM G.M. Various Models ’86/, Nissan Altima & Maxima 2002/

2009 Honda CRF450R Decompression Plunger PRODUCT UPDATE CAMPAIGN

0

Filed Under (Honda) by admin on 21-04-2011

download
JH2PE053*9K700001 thru JH2PE053*9K703372 (*) Denotes check digit UPDATE PROCEDURE DEALER VENTORY Any affected unit in your inventory must be updated with a new decompression plunger and weight before delivery to the customer. Refer tothe PARTS INFORMATION and the UPDATE PROCEDURE sections of thisb Service Bulletin. Refer to the 2009 CRF450R Service Manual for specific removal instructions. 1. Remove the seat (page 3-3). 2. Remove the shrouds (page 3-4). 3. Properly hang the fuel tank (page 4-6). 4. Remove the camshaft (page 9-10) CUSTOMER INFORMATION: The information in this bulletin is intended for use only by skilled technicians who have the proper tools, equipment, and training to correctly and safely maintain your Honda. These procedures should not be attempted by “do-it-yourselfers,” and you should not assume this bulletin applies to your Honda, or that your Honda has the condition described. To determine whether this information applies, contact an authorized Honda dealer. 5. Replace the decompression weight and plunger with kit parts (page 9-14). 6. Reinstall all previously removed parts. IDENTIFICATION When you have completed the update, place a punch mark before the first digit of the V.I.N. located on the right side of the steering head. 0080 WARRANTY INFORMATION This Product Update Campaign ends on arch 7, 2012. Normal claim submission requirements apply. fter completing the UPDATE PROCEDURE,submit one warranty claim per unit with the following information: WARRANTY CLAIM TEMPLATE: Template: R02A* Flat Rate Time: 1.2 hours *Template reads “R-zero-2-A”.

Incoming search terms:

Incoming search terms: