2008 vulcan 1600 antifreeze requirements

You search Auto repair manual PDF 2008 vulcan 1600 antifreeze requirements, if there are search results will appear below. If search results do not exist, please search by others keyword.





KAWASAKI VULCAN 1600 / NOMAD 1600 INSTALLATION INSTRUCTIONS

0

Filed Under (Kawasaki) by admin on 25-10-2010

download
Remove seat and fuel tank. Consult service manual for proper removal of tank. 2. Remove left side cover and loosen the four bolts inside. Route the two 6-pin connectors between the side cover and frame as shown by the dotted line. Tighten the four bolts. (Fig 1) 3. Route 6-pin connectors under frame and up left side of engine. (Fig 2) 4. Locate the 6-pin connector next to the ignition coil. Disconnect and connect the Fuelpak 6-pin connectors in-line on the stock connector. (Fig 3) 5. Route single black wire to the front of engine and down to the horn. (Fig 4) 6. Disconnect the factory black/white wire from horn. Plug Fuelpak into horn and plug Fuelpak black/white wire to Fuelpak connector. Be sure Fuelpak connector cannot short to frame or radiator. 7. Route black and green wires to battery negative. 8. Attach Fuelpak to Fuelpak harness and mount in left side cover. (Fig 5a 49 State) (Fig 5b Caliornia Models) 9. Before reassembling the bike, make sure handlebar switch is in the engine off position and turn the key on. Fuelpak should light up. Sound the horn. If Fuelpak turns off when the horn is sounded, recheck the black wire connection on the horn and that it is connected to the correct wire from the factory harness. 10. Use supplied zip ties to hold Fuelpak wire harness away from engine. 11. Follow the service manual to reinstall the gas tank

Incoming search terms:

2003 – 2008 4Runner AND 2007 – 2008 FJ Cruiser FRONT AND REAR DIFFERENTIAL GEAR OIL SPECIFICATION CHANGE

0

Filed Under (Toyota Manuals) by admin on 14-11-2011

download
75W-85 GL5 synthetic gear oil beginning with the 2008 model year. This new synthetic gear oil is compatible with 2003 – 2007 model year 4Runner and 2007 model year FJ Cruiser differentials. Please refer to the Parts Information section below for information about this gear oil and use this gear oil (or equivalent) when filling front or rear differentials with oil. 2003 – 2008 model year 4Runner vehicles. 2007 – 2008 model year FJ Cruiser vehicles. PREVIOUS PART NUMBER CURRENT PART NUMBER PART NAME TYPE QTY N/A 08885-02606 Toyota Genuine Differential Gear Oil LX 75W-85 API GL-5 SAE 75W-85 LSD As Needed N/A 08885-02506 Toyota Genuine Differential Gear Oil LT 75W-85 API GL-5 SAE 75W-85 w/o LSD As Needed Refer to the diagram below to identify if LSD or non-LSD gear oil is used on the vehicle. For applicable vehicles, there is a caution label above the filler plug, as shown below

Incoming search terms:

KAWASAKI VULCAN 1500, 1600, 2000 HANDLEBAR RISERS INSTALLATION INSTRUCTIONS

0

Filed Under (Kawasaki) by admin on 25-10-2010

download
1. Lay a blanket folded several times over the fuel tank to protect it. 2. Loosen (do not remove) from underneath, the two hex nuts holding the risers to the upper triple clamp. (Steering head) 3. Remove the four handlebar clamp bolts. (8mm allen wrench) While sitting on the motorcycle, pull the handlebars and upper clamp off of the risers. They may be slightly stuck and require some force to get free. Lay the handlebar and/or upper clamp/gauge assembly carefully on the blanket. 4. Remove the nuts and risers from the triple clamp. NOTE: Be careful not to scratch the upper triple clamp when installing the new risers. Assemble the supplied lock washers and flat washers onto the supplied bolts. Install the new risers onto the triple clamp and finger-tighten the bolts. 5. Re-install the handlebars and upper clamp/gauge assembly. Tighten the front bolts first closing the gap at the front, and then tighten the rear bolts. Tighten the two riser-mounting bolts securely. Check for adequate clearance and proper routing of cables and hoses.

Incoming search terms:

Kawasaki Vulcan 1600 Classic Exhaust Serrated Installation Instructions

0

Filed Under (Kawasaki) by admin on 25-10-2010

download
Loosen both top and bottom muffler hose clamps as shown. (Fig.1&2) Figure 1 Figure 2 2. Remove 10mm bolt with 10mm nut on back side of bracket as shown. (Fig. 3&4) Figure 3 Figure 4 3. Loosen 6mm bolt on passenger foot peg bracket as shown. Once loose remove top muffler 10mm nut and 10mm bolt. Slide bolt out of rubber grommet. (Fig.5&6) Figure 5 Figure 4. Carefully remove top and bottom stock mufflers, by sliding both mufflers out by rear fender. (Fig. 7) Figure 7 5. Use Phillips screw driver and remove bolt as shown. Remove side cover carefully by pulling towards your body. (Fig.8&9) Figure 8 Figure 9 6. Remove rear head pipe by removing two stock socket cap nuts as shown. Once nuts are removed pull rear head pipe away from bike and set aside. (Fig.10) Figure 107. Remove stock front head pipe by removing two stock socket cap nuts as shown. Once nuts are removed pull front head pipe away from the bike and set aside. (Fig.11&12) Figure 11 Figure 12

Kawasaki Vulcan 1600 Classic Exhaust Installation Instructions

0

Filed Under (Kawasaki) by admin on 25-10-2010

download
1. Loosen both top and bottom muffler hose clamps as shown. Remove 10mm bolt with 10mm nut on back side of bracket as shown. 3. Loosen 6mm bolt on passenger foot peg bracket as shown. Once loose remove top muffler 10mm nut and 10mm bolt. Slide bolt out of rubber grommet. . Carefully remove top and bottom stock mufflers, by sliding both mufflers out by rear fender. ( Use Phillips screw driver and remove bolt as shown. Remove side cover carefully by pulling towards your body.figure Figure 9 6. Remove rear head pipe by removing two stock socket cap nuts as shown. Once nuts are removed pull rear head pipe away from bike and set aside. (Fig.10)

Incoming search terms:

Cobra 2008 CX50SR (King) Ignition System installation Manual

0

Filed Under (Cobra) by admin on 10-11-2010

download
Many 2008 Cobra CX50SR (King) customers are experiencing performance issues with their new motorcycles. These issues include cracking/popping noises, degrading performance, and excessively hot exhaust pipes. These issues have been traced back to manufacturing flaws with the new IDM brand ignition system. Because of the time associated with getting these issues sorted out, Cobra is switching production of the 2008 King over to the PVL brand ignition system (the same design used on 2007 model King motorcycles). Customers with 2008 Kings built prior to this date may exchange it for a PVL system at no cost for the hardware. For existing product in the field, Cobra will not support the IDM system until our supplier has their component functioning properly. To install the PVL system on the 2008 King simply remove the old hardware, and bolt on new (an updated Cobra universal puller will be required to remove the ignition rotor). The timing of the new PVL system will have to be set properly during installation

Yamaha's 2008 Raider Custom

0

Filed Under (Yamaha) by admin on 16-11-2010

download
MW F800GS Preview! 12 Ducati’s 1098S Superbike- Moto-lust Satisfied 20 2008 Yamaha R6 First Impression— Much-needed mid-range thanks to YCC-I 22 Wire Without Fire— Howto modify electrical circuits… minus the flames! 27 Crash Survey— Share your unfortunate experiences so we can all learn how to avoid the pain 29 2008 Performance Index— Bigger than ever 34 CANbus 101— Understanding Controller Area Network electrical wiring 36 Shadow 750 Options— OEM accessories evaluated 37 Triumph’s 2008 Lineup— The Street Triple 675 and Rocket III Touring debut 39 Medical Motorcycling— Flesh-eating Bugs! 40 Motorcycle Design— Shafted: Moto Guzzi’s identity crisis 48 Innovation Of The Month— Orikaso dish set 48 Light My FireSpork

Incoming search terms:

2008 Triumph Rocket III specifications and pictures

0

Filed Under (Triumph) by admin on 06-11-2010

download
Triumph Rocket III 2008 Picture credits – Triumph . Click to submit more pictures. 2008 Triumph Rocket III More pictures… Discuss this bike Rate this motorbike This bike’s rating Write a review Sell this motorcycle Such bikes for sale Tip a friend List related bikes General information Model: Triumph Rocket III Year: 2008 Category: Custom / cruiser Rating: 68.5 out of 100. Show full rating and compare with other bikes Engine and transmission Displacement: 2294.00 ccm (139.98 cubic inches) Engine type: In-line three Stroke: 4 Power: 140.00 HP (102.2 kW)) @ 6000 RPM Torque: 147.00 Nm (15.0 kgf-m or 108.4 ft.lbs) @ 2500 RPM Compression: 8.7:1 Bore x stroke: 101.6 x 94.3 mm (4.0 x 3.7 inches) Fuel system: Injection. Multipoint sequential electronic fuel injection Fuel control: DOHC Ignition: Digital – inductive type – via electronic engine management system Cooling system: Liquid Gearbox: 5-speed Transmission type final drive: Shaft drive (cardan) Clutch: Wet. multi-plate Physical measures Dry weight: 319.3 kg (704.0 pounds) Seat height: 739 mm (29.1 inches) If adjustable, lowest setting. Overall height: 1,166 mm (45.9 inches) Overall length: 2,499 mm (98.4 inches) Overall width: 970 mm (38.2 inches) Wheelbase: 1,694 mm (66.7 inches) Chassis and dimensions Frame type: Tubular steel. twin spine Rake (fork angle): 32.0° Front suspension: 43mm upside down forks Rear suspension: Chromed spring twin shocks with adjustable preload Front tyre dimensions: 150/80-R17 Rear tyre dimensions: 240/50-R16 Front brakes: Double disc Front brakes diameter: 320 mm (12.6 inches) Rear brakes: Single disc Rear brakes diameter: 316 mm (12.4 inches) Speed and acceleration Fuel capacity: 23.84 litres (6.30 gallons) Color options: Claret. Phantom Black Further information Parts and accessories Check out parts and accessories from our partners. Ask questions Join the 08 Triumph Rocket III discussion group, the new Triumph forum at Bikez.name or the new Custom / cruiser forum at Bikez.name. Insurance, loans, testsSearch the web for dealers, loan and insurance costs, tests, customizing, etc. Related bikes List related bikes for comparison of specs

Incoming search terms:

2008 KAWASAKI KX 250 F RACING AND EVOLUTION EXHAUST SYSTEM

0

Filed Under (Kawasaki) by admin on 05-11-2010

download
the Akrapovic Racing and Evolution complete exhaust systems are the flagships of our product lines. They are designed for competition-oriented MX riders who demand maximum performance from their exhaust systems. With their production quality, engine performance improvements and modern Hexagonal muffler design they satisfy the requirements of all riders. The systems are designed for two markets; in the US they are available with an approved spark arrester, and for the EU and other non-US markets they come with a noise damper. New for 2008 is additional chamber that helps to reduce noise emission and provides better power and torque at low rpm range. PERFORMANCE Measurements of the Akrapovic EVOLUTION system on the KAWASAKI KX 250 F (with muffler insert): Power & Torque: The Akrapovic Evolution and Racing systems deliver a performance increase throughout nearly the entire rpm range. It is most pronounced in the bottom and the top of the range. The systems deliver increased torque similar to the power increase. Max. increased power of 0.7 HP was measured at 12260 rpm, while max. power of 34.6 HP was measured at 11400 rpm. CONFIGURATION Akrapovic Racing and Evolution systems are of a recognised Hexagonal off-road form. They differ only in terms of the material of the pipe: we use stainless steel for Racing and titanium for Evolution. The header tube is conical, made from stainless steel (Racing) or titanium (Evolution) with additional chamber. It is jointed with a conical SS/titanium link pipe by a sleeve joint, which is secured with a silicon-shielded spring. The link pipe is welded to the muffler. The inlet cap, due to the method of connection with the link pipe, is made from stainless steel (Racing) or titanium (Evolution), same for the internal perforation. The outlet cap is made of carbon-fiber for evolution and composite polymer for Racing system. The outer sleeve of the muffler is available either made from titanium or carbon fiber. The system is attached to the motorcycle with the Akrapovic carbon fiber clamp. The Akrapovic carbon fiber heat shield is also intended for this system. The system comes with a built-in noise damper for the European and other markets, and an approved spark arrester for the American market, which is marked with a laser engraving

Incoming search terms:

2008 KAWASAKI KX 250 F SLIP-ON EXHAUST SYSTEM

0

Filed Under (Kawasaki) by admin on 05-11-2010

download
quality, engine performance improvements and modern Hexagonal muffler design they satisfy the requirements of all riders. The systems are designed for two markets; in the US they are available with an approved spark arrester, and for the EU and other non-US markets they come with a noise damper. New for 2008 is additional chamber that helps to reduce noise emission and provides better power and torque at low rpm range. PERFORMANCE Measurements of the Akrapovic EVOLUTION system on the KAWASAKI KX 250 F (with muffler insert): Power & Torque: The Akrapovic Evolution and Racing systems deliver a performance increase throughout nearly the entire rpm range. It is most pronounced in the bottom and the top of the range. The systems deliver increased torque similar to the power increase. Max. increased power of 0.7 HP was measured at 12260 rpm, while max. power of 34.6 HP was measured at 11400 rpm. CONFIGURATION Akrapovic Racing and Evolution systems are of a recognised Hexagonal off-road form. They differ only in terms of the material of the pipe: we use stainless steel for Racing and titanium for Evolution. The header tube is conical, made from stainless steel (Racing) or titanium (Evolution) with additional chamber. It is jointed with a conical SS/titanium link pipe by a sleeve joint, which is secured with a silicon-shielded spring. The link pipe is welded to the muffler. The inlet cap, due to the method of connection with the link pipe, is made from stainless steel (Racing) or titanium (Evolution), same for the internal perforation. The outlet cap is made of carbon-fiber for evolution and composite polymer for Racing system. The outer sleeve of the muffler is available either made from titanium or carbon fiber. The system is attached to the motorcycle with the Akrapovic carbon fiber clamp. The Akrapovic carbon fiber heat shield is also intended for this system. The system comes with a built-in noise damper for the European and other markets, and an approved spark arrester for the American market, which is marked with a laser engraving.

Incoming search terms: