2010 harley 48 muffler expolded veiw

You search Auto repair manual PDF 2010 harley 48 muffler expolded veiw, if there are search results will appear below. If search results do not exist, please search by others keyword.



  2010 harley 48 muffler expolded veiw Direct Download speed 5282 Kb/s

  2010 harley 48 muffler expolded veiw Full Version speed 6162 Kb/s



HARLEY DAVIDSON SOFTAIL SPRINGER Dual Slip-On Exhaust System Installation Manual

0

Filed Under (Harley Davidson) by admin on 22-12-2010

download
REMOVING THE STOCK MUFFLERS 1. Loosen the bolt on the pinch clamp at the front end of each muffler. 2. Remove the two bolts that mount the muffler to the mounting bar. Repeat this step on the opposite muffler. 3. Remove the stock mufflers and set them aside. Note: It may be necessary to use a penetrating lubricant to loosen the mufflers from the head pipes. INSTALLING YOUR NEW VANCE & HINES SLIP-ON EXHAUST SYSTEM 1. Remove the two 5/16″ flanged head bolts from the bracket that is welded to the backside of each muffler. Attach one of the mounting brackets (supplied) to each muffler, using two of the 5/16″ flanged head bolts (removed earlier), leaving them loose at this time. When the bracket is mounted correctly on the muffler, the single hole end should point down when the muffler is mounted to the bike. 2. Be sure there is a muffler clamp (supplied) over the front (notched end) of each muffler. 3. Slip the muffler onto the stock head pipe, mount the muffler to the rear most hole of the stock mounting bar, using one of the stock bolts and tighten. Repeat this step on the opposite muffler. Note: When installed correctly, the Vance & Hines logo on the muffler should face outwards. 4. Tighten the two muffler clamps. 5. Tighten the two 5/16″ flange bolts on each muffler bracket. 6. Wipe any finger prints or oil off any chrome parts of the exhaust system before starting the motorcycle. 7. Be sure to tighten all hardware before starting your motorcycle. RE-JETTING INSTRUCTIONS Re-jetting the carburetor will result in realizing the “full” potential of this performance exhaust system. Vance & Hines offers jet kits for most applications

HARLEY DAVIDSON SCREAMIN' EAGLE STREET PERFORMANCE TOURING END CAP MUFFLER KIT INSTALLATION MANUAL

0

Filed Under (Harley Davidson) by admin on 14-04-2011

download
PRODUCT INFORMATION Noise Emission Warranty Harley-Davidson warrants that these mufflers, at the time of sale, meet all applicable United States E.P.A. Federal noise and Emissions standards. This warranty extends to the first person who buys these mufflers for proposes other than resale, and to all subsequent buyers. Warranty claims should be directed to an authorized Harley-Davidson Dealer. Tampering Prohibition Federal law prohibits any modification to this exhaust system which causes the motorcycle to exceed the Federal noise standard. Use of the motorcycle with such a modified exhaust system is also prohibited. NOTE This product should be checked for repair or replacement if the motorcycle noise has increased significantly through use. Otherwise, the owner may become subject to penalties under state and local ordinances. INSTALLATION NOTE Install end caps on mufflers before installing mufflers on vehicle. Install Direct Bolt-On End Caps 1. See Figure 1. Install end cap (2) to muffler (3) with four socket head cap screws (1). Tighten to 82-86 in-lbs (9.3- 9.7 Nm) . 2. Repeat for opposite side muffler. 3 2 1 is05426 1. Socket head screw (4) 2. End cap 3. Muffler Figure 1. Install End Cap on Muffler Install Attachment Ring End Caps 1. See Figure 2. Slide the three U-nuts (2) onto the bosses of the end cap attachment ring cup on the muffler. 2. Install attachment ring (1) to muffler with four socket head cap screws (3). Locate the attachment ring with a U-nut in the 12 o’clock position. Tighten to 82-86 in-lbs (9.3-9.7 Nm) . 3. Slide end cap (5) onto muffler body being careful to align holes in end cap with U-nuts. 4. Install the three countersunk screws (4) and tighten screws securely. 5. Repeat for opposite side muffler

Incoming search terms:

1995-2010 HARLEY DAVIDSON TOURING MODELS 3.5" & 4" TRU-POWER CHROME SLIP-ON MUFFLER SET installation Manual

0

Filed Under (Harley Davidson) by admin on 02-04-2012

download
1. Be sure motorcycle is properly secured before you begin. 2. Remove saddlebags and place aside. 3. Begin removing your stock mufflers. Starting on one side of the bike, loosen the clamp securing the muffler to the headpipe. Remove the two bolts securing the muffler to the mounting bracket on the saddlebag support of the bike. Keep these bolts for use with your new slip-on mufflers. 4. Using supplied clamp over new slip-on muffler install over stock headpipe. Align the mount tab with holes in the mounting bracket on the saddlebag support. Note that there is a left and a right side pipe. The clearance dent is on the side closest to the swingarm providing clearance on many models. Secure pipe with stock bolts. Be sure to apply Loctite® to bolts upon re-installation. 5. Securely tighten bolts, and then tighten the clamp securing the slip-on muffler to the headpipe. 6. On the opposite side of the bike, repeat steps 3-5. 7. Reinstall saddlebags. 8. Be sure to check proper alignment and clearances before riding. 9. Every time you perform regular maintenance be sure to re-torque all clamps and fasteners. SUGGESTION: For maximum performance you can purchase our “Tru-Power” Headers and XXX Air Cleaner to truly complement the power that your new “Tru-Power” Slip-Ons provide. DISCLAIMER: This aftermarket exhaust system is designed to replace a stock exhaust system on a motorcycle with its engine, frame, and other components in their stock design configuration and location. Re-mapping or re-jetting may be necessary after installation of these exhaust pipes.

Harley davidson Sportster Custom Straightshot Exhaust System REMOVAL AND INSTALLATION INSTRUCTIONS

0

Filed Under (Harley Davidson) by admin on 19-12-2010

download
REMOVING THE STOCK EXHAUST SYSTEM 1. Loosen the heat shield clamps on both front and rear exhaust pipes. 2. Remove the two mounting nuts from each head pipe, located at the cylinder head. 3. Remove the nut that mounts the front muffler to the engine, located below the rear brake master cylinder. 4. Remove the bolt that mounts the rear muffler to the mounting bar. 5. Remove the entire exhaust system and set it aside. 6. Carefully remove the flanges and circlips from the stock exhaust system using snapring pliers. Note: If circlips look bent or twisted replace them with new circlips . INSTALLING YOUR NEW VANCE & HINES EXHAUST SYSTEM 1. Vance and Hines recommends you replace your exhaust gaskets with Sceamin’ Eagle gaskets part number 17048-98. 2. Install the circlips and flanges from the stock system on to both of the new head pipes. 3. Unscrew all of the hose clamps (supplied) until they are completely loose. Mark the top edge of both heat shields with the location of the mounting clips that are welded to the backside. Position the front heat shield over the head pipe and feed the tail end of the hose clamps into the clips. Be sure that each hose clamp is engaged with both clips. Repeat this step with the rear heat shield. Note: The screw end of the hose clamp should be accessible, but not visible when pipe is mounted on the bike. 4. Install the front head pipe using the stock nuts, do not tighten at this time. 5. Install the rear head pipe using the stock nuts, do not tighten at this time. 6. Install one muffler clamp (supplied) over the inlet (notched end) of each muffler. 7. Identify the front and rear muffler mounting brackets. The front bracket is stamped with the number 305 and the rear muffler bracket is stamped 213 . 8. Install the front muffler mounting bracket to the stud on the engine (where the stock muffler mounted) and fasten using the stock nut (leave loose at this time). The bracket will bend inward towards the center of the motorcycle when installed correctly. Note: You may need to move the wires and hoses on the lower frame rail to decrease the possibility of them chaffing on the bracket bolts. 9. Slip one of the mufflers onto the front head pipe. Slide one dog bone shaped nut plate (supplied) under the bracket that is welded to the backside of the muffler. Attach the muffler to the mounting bracket using the 5/16″ flange head bolts (supplied) leave them loose at this time. 10. Attach the rear mounting bracket to the rear muffler. Slide one dog bone shaped nut plate (supplied) under the bracket that is welded to the backside of the muffler. Attach the bracket to the muffler using two of the 5/16″ flange head bolts (supplied), leave them loose at this time. Note: The single hole in the bracket will point downward and slightly forward when installed correctly

2010 Harley-Davidson New Model and Technical Information

0

Filed Under (Harley Davidson) by admin on 15-12-2010

download
Meet MY2010 EPA Emissions regulations for all Harley- Davidson®vehicles sold in 50 state and Canadian markets •Reduce oxygen intrusion into the exhaust system -Promotes catalyst health and efficiency New rib/curl pipe end feature offers positive muffler stop and improved pipe consistency. 2010 Dyna®Models Crossover joints updated with new clamp and gasket. Updated joint New clamp (Comes w/gasket) New Gasket Torque 15-19 ft-lbs (20.3-25.8 Nm) 2010 Dyna®Models New 2010 FXDWG Wide Glide® New 2010 FXDWG Wide Glide® New rear fender New Floating Front Brake Rotors* New fuel tank with wider tunnel* *All Dyna®Models Current FXDB solo seat with new cover New sissybar New pillion Current FXDWG front forks with 1″shorter overall length Current FXDWG front wheel (steel) (21×2.15) black rim with chrome spokes & machined hub; Front tire pattern -GT402 FXDWG front fender 34 degree frame with tank mount boss raised by ¾” New handlebar with FXDF risers/caps *Michelin®tires on all but FXDF and FXDWG FXDB rear wheel (black rim with chrome spokes) (17×4.5) (180- 60×17), rear tire pattern -GT502 (Screamin’Eagle®) FXDF exhaust pipes & mufflers with chrome exhaust shields Gloss black rear forging covers Current FXDB rear shocks with top covers Current FXDC battery cover with chrome Wide Glide®trim Forward foot controls New 2010 FXDWG Wide Glide® Domestic tail lights Canada & all International tail lights Taillight (HDI/Canada) Side mount license plate Domestic only •Internally wired handlebar •34 degree frame with tank mount boss raised by ¾”& rear forgings moved out 2mm each side from FXDF •Flame tank replacement part is VIN restricted •Two new rear fenders (Domestic & HDI/Canada)

Incoming search terms:

2010 Harley-Davidson FLHR Road King front and rear 4-piston braking system Installation

0

Filed Under (Harley Davidson) by admin on 31-10-2010

download
in Vivid Black with blue and silver pinstripes, six-speed. Air-cooled, Twin Cam 96™ engine with Electronic Sequential Port Fuel Injection (ESPFI), ABS, security system, cast wheels with independent front and rear 4-piston braking system. Motorcycle generously donated by Harley-Davidson Motor Company Police & Fleet Sales. MSRP excludes all taxes title/documentary fees, registration, tags, dealer prep, labor and installation charges, insurance, optional equipment and accessories, certificate of compliance or non-compliance fees, and finance charges. Delivery must be coordinated through Rockville Harley-Davidson by November 30, 2010. Winner is responsible for any applicable fees above. 6,000 tickets printed. Odds of winning are 1:6,000. Ticket holder need not be present to win. Licensed by the D.C. Lottery and Charitable Games Control Board. Must be 18 years or older to win. No substitutes, return for cash, or other models. As per IRS tax code, amounts paid for chances in a raffle do not qualify as a deductible charitable contribution. Taxes on prizes are the responsibility of the winner. Harley-Davidson is proud to be a sponsor of the National Law Enforcement Officers Memorial Fund. Harley-Davidson Motor Company is a prize provider only, and Harley-Davidson, Inc., and Harley-Davidson Motor Company have no responsibility regarding conduct or administration of the raffle.

Incoming search terms:

2006 TRIUMPH SPEED TRIPLE ALUMINUM, CARBON FIBER, SLIP-ON EXHAUST SYSTEM INSTALLATION

0

Filed Under (Triumph) by admin on 30-10-2010

download
1) Place the motorcycle in a vise or on it’s stand and make sure it is safe and secure. 2) Remove the right side muffler heat shield. Loosen the right side muffler inlet clamp. Remove and retain the muffler mounting bolt and nut. Remove the right side muffler from the motorcycle. 3) If the gasket remained on the stock muffler inlet tube, remove it and inspect. Replace if necessary and then install onto the Jardine muffler inlet tube. 4) Slide the Jardine muffler into the stock s-bend outlet. 5) Attach the rubber strip to the inside of one supplied muffler clamp. Slide the muffler clamp over the muffler withe the offset facing inward. Squeeze both muffler clamp tabs together and secure it to the muffler mounting bracket using the original bolt and nut. Do not fully tighten yet. 6) Adjust the muffler so it is straight and fully tighten the t-bolt clamp, then the muffler clamp hardware. 7) Repeat steps #2-6 for the left side muffler. 8) Clean all fingerprints from the muffler. Start the motorcycle and check for any exhaust leaks. Ratchet 12mm Socket 12mm Wrench Spring Tool or Needlenose Pliers 2 – Mufflers (Left & Right) 2 – Muffler Clamps 2 – Rubber Strips SLIP-ON EXHAUST SYSTEM TRIUMPH SPEED TRIPLE 2006 18-7008-123-02 ALUMINUM 18-7008-323-02 CARBON FIBER PERFORMANCE DELIVERED! All Jardine products are warranted against defective materials and workmanship for a period of 90 days from date of original consumer purchase. Any non-defective item may be returned within 7 working days, and will be subject to a 20% restocking/repackaging fee. WHATIS WARRANTED: Any Jardine product returned, with prior approval, for defective materials or workmanship including chrome blistering, peeling, bubbling, or any unused (new) Jardine product with rust damage

Incoming search terms:

Suzuki INTRUDER 1400 SLIP-ON EXHAUST SYSTEM Installation Manual

0

Filed Under (Suzuki) by admin on 22-12-2010

download
REMOVING THE STOCK EXHAUST SYSTEM 1. Loosenthe mounting bolt and pinch clamp on both left and right hand mufflers. 2. Loosenthe clamp on the crossover tube, located between the two mufflers. 3. Remove the two nuts that mount the front head pipe flange to the cylinder head. 4. Remove the two nuts that mount the rear head pipe flange to the cylinder head. 5. Remove the head pipes using a twisting motion to break the seal at the muffler and to clear the cylinder head. Note : If the exhaust coupler gaskets did not remain in the mufflers, remove them from the head pipes at this time. These coupler gaskets will not be reused in your new exhaust system. 6. Remove the mounting bolt from the left hand muffler. Remove the muffler, again using a twisting motion to seperate the crossover tube and set the muffler aside. (Save the stock mounting hardware for reuse). 7. Repeat step #6 on the the right hand muffler. Set the muffler aside. INSTALLING YOUR NEW VANCE & HINES EXHAUST SYSTEM 1. Check the stock exhaust gaskets to be sure they are in good shape. If you have any doubts as to their condition, replace them. 2. Reinstall the stock head pipes to the engine. Note : Leave the flange nuts loose at this time. 3. Remove the mufflers from their boxes. There are a left and right hand muffler in this system. To define the difference between the left and right mufflers, check the bracket that is welded to the back side of the muffler. Each muffler is stamped with it’s own part number. Part # D500 is the RIGHT muffler and Part # D550 is the LEFTmuffler. 4. Install a three hole mounting bracket to each of the mufflers. Slide one dog bone shaped nut plate under the bracket that is welded to the backside of each muffler. Attach the mounting bracket using two of the 5/16 flange head bolts (supplied), leave them loose at this time. Note : Each muffler bracket has a number stamped on it, #179 bracket is for the left hand muffler and #180 is for the right hand muffler. When the brackets are mounted correctly, the end of the bracket with the single hole should point to the inlet end (small end) of the muffler. Refer to figure 1.

Harley Davidson Touring/ Dresser Slip-on Exhaust System REMOVAL AND INSTALLATION MANUAL

0

Filed Under (Harley Davidson) by admin on 19-12-2010

download
REMOVING THE STOCK EXHAUST SYSTEM 1. Remove both left and right saddlebags and set them aside. 2. Loosen the bolt from the pinch clamp on the front end of each muffler. Note: On the older model Dresser, spread the clamps just enough to remove them. 3. Remove the two 5/16″ bolts that mount the muffler to the saddlebag supports. Repeat this step on the opposite muffler. 4. Remove the stock mufflers and set them aside. Note: It may be necessary to use a penetrating lubricant to loosen the muffler from the head pipe. INSTALLING YOUR NEW VANCE & HINES EXHAUST SYSTEM 1. Install one muffler clamp (supplied) over the front (notched end) of each muffler. 2. Slip the muffler over the stock head pipe, mount the muffler to the saddlebag support using the two stock 5/16″ bolts and tighten. Note : There is a different muffler for the left and right side of the motorcycle. The dent in each canister should always be facing in. This is to allow clearance for the swingarm. 3. Tighten the two muffler clamps. (Torque Specification 12 ft/lbs.) 4. Replace the saddlebags. 5. Be sure to tighten all hardware before starting your motorcycle. RE-JETTING INSTRUCTIONS Re-jetting the carburetor will result in realizing the “full” potential of this performance exhaust system. Vance & Hines offers jet kits for most applications. For fuel injected models, we recommend the use of Vance & Hines Fuelpak part number 61003. PLEASE NOTE: Every effort is made for Vance & Hines Exhaust Systems to provide improved cornering clearance. However, due to design and space limitations on some motorcycle models, ground and cornering clearance may not be improved and in some cases may be reduced. Be sure to follow proper installation instructions

2010 Harley Davidson Touring Model Power Commander Installation manual

0

Filed Under (Harley Davidson) by admin on 29-02-2012

download
1 Remove the stock seat. 2 Unplug the stock wiring harness from the ECM (Fig. A) . 3 Plug the PCV connectors in-line of the stock ECM and wiring harness (Fig.B). 4 Tuck the PCV to wiring harness connection into the opening in front of the battery box (Fig. C). 5 Using the supplied velcro attach the PCV to the top of the ECM (Fig. C) FIG.A FIG.C Remove Ground wire FIG.B PCV connector PCV connector Stk connector Connection 15-011 www.powercommander.com 2010 Harley Davidson Touring PCV – 4 6 Remove the right hand saddlebag and sidecover. 7 Locate the stock O2 sensor connections and unplug both connectors (Fig. D) The stock O2 sensors will NOT be connected to anything at this time. The sensors can be removed from the exhaust if you have a way to plug the hole. Unplugging the sensors does NOT cause an engine light but will cause a historic code in the ECM for non-active O2 sensor. This is not causing any issues with the running of the bike. FIG.D Follow these instructions when using the Auto tune kit – part #AT-100B 1 Remove the left hand side cover. 2 Place the Autotune modules in front of the battery as shown in Figure H. If using velcro make sure the velcro does not cover the designation of the unit on the back (AT #1 or AT#2). The modules are coded to the front and rear cylinders. FIG.E 3 Remove the rubber plug for the diagnostic connector. Plug the lead from the Autotune kit into the stock diagnostic connector (Fig. J).This connection is under the LH sidecover. DO NOT connect to the accessory connection in front of the battery. 4 Reinstall the sidecover. FIG.F 15-011 www.powercommander.com 2010 Harley Davidson Touring PCV – 5 5 Connect the longer harness to the front O2 sensor. Route the harness along the front down tube and along the backbone of the frame to Autotune module AT#1. Wire the harness to the module per Figure G. The harness can be cut to length if desired. 6 Repeat step 4 for the rear cylinder. Wire the harness to Autotune Module AT#2. The harness can be cut to length if desired. If your exhaust does not accept the M18x1.5mm O2 sensor you will need to install the supplied O2 bungs with the Auto tune kit into your exhaust. See Auto tune instructions for more information