61 gold mining yahoo com hotmail com gmail com txt xls 2019 mail

You search Auto repair manual PDF 61 gold mining yahoo com hotmail com gmail com txt xls 2019 mail, if there are search results will appear below. If search results do not exist, please search by others keyword.





GAS GAS TXT BOY ENGLISH USER MANUAL

0

Filed Under (Gas Gas) by admin on 27-11-2010

download
Quick Guide to Maintenance Coolant liquid Coolant liquid -30ºC Crankcase oil (10w40) 500 cc. Electrode separation 0.6 mm. Forks suspension oil SAE 5 (Summer) SAE 2.5 (Winter) Fork suspension oil quantity200 cm3 Shock absorber spring length96 mm Front wheel pressure Standard 0.400 bar Competition 0.370 bar Rear wheel pressure Standard 0.350 bar Competition 0.300 bar -9- 1 Fuel – Petrol/oil mixture The motorcycle is fitted with a two-stroke internal combustion engine. This type of engine requires a mixture of petrol and oil. To ensure the correct working of the engine, the following are recommended: – Use high quality petrol, with an octane rating equal to or above 90 (RON + MON)/2 or 98 (RON). – Use 2T synthetic oil. Warning: – If the recommended oil is not available, use semi-synthetic oil. – Do not mix different oil-types. Mixture ratio: oil, 1.5% of petrol volume (50 parts petrol to every 0.75 part oil). Note: we recommend first preparing the mixture in a suitable container and then filling the fuel tank. Fuel tank This has a rapid access cap A and a vent hose B to allow gases produced in the tank to escape. – To open the cap, lift the clip in the direction shown by the arrow and turn to the left. Warning! Regularly check the cap seal and vent hose to ensure they are leak proof. Risk of spillage. -10- 3 2 Reserve Open Closed Fuel tap This has three positions: open, closed and reserve. The diagrams below show the position of tap A for each case. A Gear shift The motorcycle has a two- speed gearbox, which may be selected manually when the motorcycle is stationary, by moving the lever A in a horizontal direction, as shown by the arrow. Note: Select the gear according to the characteristics of the track

2009 GAS GAS TXT PRO TECHNICAL SPECIFICATIONS AND OWNER'S MANUAL

0

Filed Under (Gas Gas) by admin on 28-11-2010

download
ENGINE 2 stroke, single cylinder, direct reed valve crankcase induction. Liquid cooled. 125 cc. engine Cylinder size 124,8 cc. Bore and stroke 54 x 54.5 mm. 200 cc. engine Cylinder size 175,3 cc. Bore and stroke 64 x 54,5 mm. 250 cc. engine Cylinder size 247,7 cc. Bore and stroke 72,5 x 60 mm. 280 cc. engine Cylinder size 272,2 cc. Bore and stroke 76 x 60 mm. 300 cc. engine Cylinder size 294,1 cc. Bore and stroke 79 x 60 mm. Carburettor, diameter of the diffusor 26 Lubrication system Mixture (50:1)(2%) Ignition system Digital magnetic flywheel CDI TRANSMISSION Transmission type 6 gears, Four / Six system by GAS GAS* (Patented). Clutch type Hydraulic command, 1/3 discs, variable progressive with diaphragm system by GAS GAS* (Patented). Driving system By chain Gear ratio 1st. 2,996 (35x27x28/16x24x23) 2nd. 2,571 (36/14) 3th. 2,187 (35/16) 4st. 2,112 (36x23x24/14x28x24) 5st. 1,125 (27/24) 6th. 0,821 (23/28)
-11- Primary reduction ratio 2,777 (75/27) Final reduction ratio 3,818 (42/11) Overall drive ratio 8,704 (6th. gear) Transmission oil Capacity 550 cc. Type 10W40 API SF o SG. FRAME Type Tubular profile made with Cr-Mo. Tyres Front 2,75 x 21″ Trial Rear 4,00 x 18″ Trial tubeless. Suspension Front Adjustable tele-hydraulic fork ø 40 mm. (125 / 200). Adjustable tele-hydraulic fork ø 40 mm with aluminium bars (250 / 280 / 300) Rear Variable progressive system with mono-shock multiadjustable. Suspension stroke Front 177 mm. Rear 164 mm. Front fork oil SAE 5. Front fork oil level ø 40 mm.(125 / 200) 180 mm. air chamber steel bar ø 40 mm. (250 / 280 / 300) 160 mm. air chamber aluminium bar BRAKES Type Disc brake. Disc diameter Front ø185 mm. 4 piston calipers. Rear ø150 mm. 2 piston calipers. DIMENSIONS Overall height 1180 mm. Overall width 820 mm. Seat height 650 mm. Ground clearance 315 mm. Wheelbase 1330 mm. Fuel tank capacity 3,1 liters.

Incoming search terms:

HONDA GOLD WING GL1800 Independent Suspension Owner's Maintenance Notes

0

Filed Under (Honda) by admin on 16-02-2011

download
1. Tire Pressure and Rotation : Keep the nominal tire pressure at about 23-27psig. It is not necessary to periodically rotate the trike tires unless you experience unusual tire wear. 2. Bearing Lubrication . Your Swing Arm and wheel bearings are sealed and do not require greasing. However, should you experience unusual wheel bearing noise you should take your trike to a Champion Trike Dealer or to your motorcycle mechanic for a checkup. 3. Body Lubrication . There are no grease fittings on the trike body and no required body lubrication points. 4. Rear end lubrication . Your differential comes filled with SAE 85W140 API GL-6 gear oil. You should not have to top-off the differential unless you experience axle seal or pinion seal leaks. If you want to check the oil level, do so by removing the fill plug on the top of the differential housing (Remove seat) and by using a suitable measuring device, the oil level should be 5 1/4″ inch down from the top of the differential housing. Refill as necessary. Change the differential oil every 30,000 – 35,000 miles by draining it and refill with 2 quarts of above gear oil.. 5. Brakes . Check your front and rear brake system fluid levels every 3,000 miles and top-off as necessary. Inspect brake pads every 10,000 miles and replace as necessary. Rear brake pads are Volkswagen Part # D101P. 6. Drive Train . The rear driveshaft U-joint and slip yoke spline are fitted with grease fittings, pump the fittings with wheel-bearing, graphite or high-pressure grease every 3,000 to 5,000 miles. The front u-joint does not have grease fittings. 7. Suspension System : The suspension is a Double A-arm Independent suspension with a standard single setting anti-roll bar or an optional Variable Sway Control (VSC) which can be adjustment for optimal ride, handling characteristics and performance. The A- arms are equiped with bushings that does not require servicing. The suspension system is designed to give you the best ride with a load of no more than 600 pounds (passengers plus cargo plus trailer tongue weight): 8. EZ-Steer (rake kit) : If your trike is equipped with Champion’s EZ-Steer, the bearings are a wear item. You should follow your motorcycle manufacturer’s recommended front-end triple-tree maintenance requirements. Generally these call for an initial service at 1,000 miles followed by periodic maintenance at 10,000 mile intervals

Honda GL1500 Gold Wing Trike Conversion Installation Manual

0

Filed Under (Honda) by admin on 17-02-2011

download
REMOVAL OF ORIGINAL PARTS Secure and raise motorcycle 9 to 10 inches using a quality motorcycle lift. Remove the following from the vehicle. See OEM manual for detailed instructions. Items to be retained for reinstallation after modification are noted. • Left and right side-covers (to be re-installed with minor modification). • Seat (to be re-installed without modification). • Trunk. • Left and right passenger foot rests (to be re-installed without modification). • Left and right side-covers above passenger foot rests. • Battery and holder (to be re-installed without modification). • Left and right saddle bags (retain side cover mounting grommets for re-use). • Left and right mufflers. • Rear wheel. • Rear brake line to master cylinder.** • Reverse resistor assembly (to be relocated). • Swing Arm (Drive shaft boot will not be used). • Bank angle sensor. • Shocks. Air shock (non coil-over) to be reused. ** Thoroughly vacuum drain rear brake system, including feed line to left front caliper PREINSTALLATION PREPARATION 3.1 Modification to Trunk / Luggage Stay Removal from vehicle frame is not necessary. a. Cut the down tubes of the trunk stay and remove the lower section as shown in Figures 1 & 2 b. Trim rear upper tube-end rounded corners just outboard of welded nut. Trim line should be parallel with center line of vehicle. This will provide clearance for body when installed. Figure 2 (Inset) c. Remove the Hazard and Turn Signal relays from the center holder; bend Relay Holder Tab up 90°. Relays will be relocated to left and right sides. Figure 3 d. Disconnect and remove Bank Angle Sensor from its mount tab (Bank Angle Sensor will not be re-used). Cut wires midway between sensor and plug. e. On plug end, splice / connect red and green wires together to close the circuit. f. Cut and remove the Bank Angle Sensor mount tab from the Trunk stay. Figure 4 3.2 Modification to Rear Inner Fender Removal of fender and attached parts is not necessary for modification. a. Place supplied template (See last page) on fender (left and right sides) as shown and mark outline. With box cutter, cut fender along template outline. Once material is removed, make a vertical cut up the side (line indicated by arrow Figure 5) of the fender. Do not continue cut across top of fender. Figure 5 b. Carefully heat underside of fender with heat gun and bend fender upward until aft end contacts frame cross member. c. Drill holes in plastic fender through cross brace at locations indicated and secure fender to cross with zip ties. Figure 6

HONDA GOLD WING GL1500 AND GL1800 TRIKE CONVERSION KIT Owner's Maintenance Notes

0

Filed Under (Honda) by admin on 16-02-2011

download
1. Tire Pressure and Rotation : Keep the nominal tire pressure at about 20-25 psi. It is not necessary to periodically rotate the trike tires unless you experience unusual tire wear. 2. Bearing Lubrication . Your Swing Arm and wheel bearings are sealed and do not require greasing. However, should you experience unusual wheel bearing noise you should take your trike to a Champion Trike Dealer or to your motorcycle mechanic for a checkup. 3. Body Lubrication . There are no grease fittings on the trike body and no required body lubrication points. 4. Rear end lubrication . Your differential comes filled with 1 quart of SAE 85W140 API GL-6 gear oil. You should not have to top-off the differential unless you experience axle seal or pinion seal leaks. Check the oil level every 10,000 miles, or sooner if you experience leaks, and refill as necessary. Do not fill higher than the fill-hole. Change the differential oil every 30,000 – 35,000 miles. 5. Brakes . Check your front and rear brake system fluid levels every 3,000 miles and top-off as necessary. Inspect brake pads every 10,000 miles and replace as necessary. Pads are Volkswagen Part # D101P. 6. Drive Train . If your driveshaft U-joint and/or splines are fitted with grease fittings, pump the fittings with wheel-bearing, graphite or high-pressure grease every 3000 to 5,000 miles. If yours does not have grease fittings then lubrication is not required. 7. Suspension System : The suspension system is designed to give you the best ride with a load of no more than 500 pounds (passengers plus cargo plus trailer tongue weight): GL1500: The OEM adjustable air shock is used in conjunction with two (2) new Progressive 416 air shocks. The three shocks should be pressurized to about 20 psig, but to no more than 70 psig; GL1800: You can still use your OEM mono-shock pre-load adjustment. Your two (2) new coil-over shocks do not have an air system connection. However, there is a pre-load adjuster ring on each new shock that is factory-set at the “lowest” setting, for the softest ride. Changing this setting will result in a stiffer ride. 8. EZ-Steer (rake kit) : If your trike is equipped with Champion’s EZ-Steer, the bearings are a wear item. You should follow your motorcycle manufacturer’s recommended front-end triple-tree maintenance requirements. Generally these call for an initial service at 1,000 miles followed by periodic maintenance at 10,000 mile intervals. 9. Electrical : Your trike is pre-wired for a trailer connection. The harness is just below the trunk door on the underside of the body.

Incoming search terms:

2006 HONDA GOLD WING Specifications

0

Filed Under (Honda) by admin on 29-01-2011

download
Engine Type Liquid-cooled 4-stroke 12-valve SOHC flat-6 Displacement 1,832cm3 Bore x Stroke 74 x 71mm Compression Ratio 9.8 : 1 Max. Power Output 87kW/5,500min-1 (95/1/EC) Max. Torque 167Nm/4,000min-1 (95/1/EC) Idling Speed 700min-1 Oil Capacity 4.6 litres Fuel System Carburation PGM-FI electronic fuel injection with automatic choke Throttle Bore 40mm Aircleaner Viscous, cartridge-type paper filter Fuel Tank Capacity 25 litres (including 4-litre warning light reserve) Electrical System Ignition System Computer-controlled digital transistorised with electronic advance Ignition Timing 2° BTDC (idle) ~ 30° BTDC (3,500min-1) Sparkplug Type BKR6E011 (NGK); K20PR-U11 (ND) Starter Electric Battery Capacity 12V/18AH ACG Output 1,000W Headlights 12V, 55W x 2 (low) / 55W x 2 (high) Drivetrain Clutch Wet, multiplate with coil springs Clutch Operation Hydraulic Transmission Type 5-speed (including overdrive, plus electric reverse) Primary Reduction 1.591 (78/49) Gear Ratios 1 2.375 (38/16) 2 1.454 (32/22) 3 1.068 (31/29) 4 0.843 (27/32) 5 0.686 (24/35) Final Reduction 2.750 (33/12) Final Drive Enclosed shaf

Honda GL1500 Gold Wing Motorcycles Trike Conversion Installation Guide

0

Filed Under (Honda) by admin on 19-12-2011

download
Secure and raise motorcycle 9 to 10 inches using a quality motorcycle lift. Remove the following from the vehicle. See OEM manual for detailed instructions. Items to be retained for reinstallation after modification are noted. • Left and right side-covers (to be re-installed with minor modification). • Seat (to be re-installed without modification). • Trunk. • Left and right passenger foot rests (to be re-installed without modification). • Left and right side-covers above passenger foot rests. • Battery and holder (to be re-installed without modification). • Left and right saddle bags (retain side cover mounting grommets for re-use). • Left and right mufflers. • Rear wheel. • Rear brake line to master cylinder.** • Reverse resistor assembly (to be relocated). • Swing Arm (Drive shaft boot will not be used). • Bank angle sensor. • Shocks. Air shock (non coil-over) to be reused. ** Thoroughly vacuum drain rear brake system, including feed line to left front caliper Modification to Trunk / Luggage Stay Removal from vehicle frame is not necessary. a. Cut the down tubes of the trunk stay and remove the lower section as shown in Figures 1 & 2 b. Trim rear upper tube-end rounded corners just outboard of welded nut. Trim line should be parallel with center line of vehicle. This will provide clearance for body when installed. Figure 2 (Inset) c. Remove the Hazard and Turn Signal relays from the center holder; bend Relay Holder Tab up 90°. Relays will be relocated to left and right sides. Figure 3

Honda GL1800 Gold Wing Motorcycles Accent Panel Installation Guide

0

Filed Under (Honda) by admin on 27-10-2010

download
1. Remove left engine side cover. 2. Unplug side stand sensor harness and remove side stand. 3. Cut plug from side stand wiring, leaving approximately 1 ½” of wire on plug. Connect green wires with supplied crimp to bridge side-stand sensor. Figure 1 4. Install modified plug to electrical harness of vehicle. Figure 1 5. Replace engine side cover. 6. Remove center inner fairing panel. 7. Remove lower setting bolts (not to be re-used) from front lower fairing. It is not necessary to completely remove this panel. 8. Lift the side mirror boots and disconnect the running / turn signal wiring. Figure 2 9. With the single plug end first, feed the supplied wire harness into the fairing just below the mirrors. Note: right side wire harness is blue, left is orange. 10. Continue working the supplied harness through the fairing until the single plug end is near the lower part of the lower fairing light nacelles. 11. Connect the supplied wire harness to the vehicles harness at the mirrors and replace mirror boots and center inner fairing panel. Figure 3 12. Remove the center stand and install the supplied cross brace using the OEM bolts and spacer. Install supplied 13 spacers / washers between bracket and OEM spacer as shown. Figure 4

HT1500 GOLD WING CONVERSION KIT INSTALLATION INSTRUCTIONS

0

Filed Under (Tips and Review) by admin on 16-12-2010

download
Removal of Bike parts: Remove the following parts following the factory manual: s ide covers, p assenger foot rests, e xhaust covers, seat, t our pack, s addlebags, b attery and b ox, r ear tire, b rake line ( at rubber hose near swing arm pivot ), s hocks ( air compressor line is disconnected at shock, and stays with compressor) , S wingarm and d riveshaft (reverse box may stay connected, just pull out to side ), m ufflers, and h elmet locks. Preparation: Cut-off the saddlebag support tubes where the vertical tube meets the angled tube in the front and back. All you want left is the tour pack support. Loosen tour pack support at bottom bolts, remove top bolts, and then lift up a little. This allows the body to go under the support. If you have the fuel tank: Secure the two black control boxes, facing each other, one on top of the other. Secure to frame using the green ground wire hole at center of frame. Use the 2 ¼” spacer tube and long screw provided to hold them together. If no fuel tank: leave rear half of fender in place Install air-compressor relocation bracket (1 ½” x 4″ w/ 3 holes) and remount compressor. After mounting, secure the compressor to the bracket with a wire tie Install suspension: See brake amendment for master cylinder prep Install machined studs in the swing arm pivot hole with some blue Locktite on them. This provides a 5/8″ stud on the side of the frame for the suspension side plates. Screw in until flush with frame. Remove the 6mm bolts from the exhaust heat shield on the outside of the frame rail. Install the shock replacement bars on the top shock stud and re-install bolts, leave bars hanging loose for now. Put the suspension on a floor jack and roll up to the bike. (note: once forward all the way, jack up to meet the studs.) Spread the chassis plates over the studs and start the nuts. Be careful not to damage the threads on the machined studs. Jack up the rear to align the shock replacement bars, slip in the bolts. Install 8mm x 40mm bolts and ¾” spacers to crash bar tabs on frame with spacer. Tighten the front stud nuts, crash bar tab bolts, and shock replacement bars

HONDA HT1500 GOLD WING CONVERSION KIT INSTALLATION INSTRUCTIONS

0

Filed Under (Honda) by admin on 25-11-2011

download
Cut-off the saddlebag support tubes where the vertical tube meets the angled tube in the front and back. All you want left is the tour pack support. Loosen tour pack support at bottom bolts, remove top bolts, and then lift up a little. This allows the body to go under the support. If you have the fuel tank: Secure the two black control boxes, facing each other, one on top of the other. Secure to frame using the green ground wire hole at center of frame. Use the 2 ¼”
spacer tube and long screw provided to hold them together. If no fuel tank: leave rear half of fender in place Install machined studs in the swing arm pivot hole with some blue Locktite on them. This provides a 5/8” stud on the side of the frame for the suspension side plates. Screw in until flush with frame. Remove the 6mm bolts from the exhaust heat shield on the outside of the frame rail. nInstall the shock replacement bars on the top shock stud and re-install bolts, leave bars hanging loose for now. Install air-compressor relocation bracket (1 ½” x 4″ w/ 3 holes) and remount compressor. After
mounting, secure the compressor to the bracket with a wire tie.