84 carbon steels and alloy steels companies contacts us in vietnam mail

You search Auto repair manual PDF 84 carbon steels and alloy steels companies contacts us in vietnam mail, if there are search results will appear below. If search results do not exist, please search by others keyword.





HONDA CBR 600 RR AKRAPOVIC CARBON-FIBER PARTS installation instructions

0

Filed Under (Honda) by admin on 03-11-2011

download
INSTALLATION OF THE AKRAPOVIC CARBON-FIBER FRONT FENDER:
1. Make sure that the engine and the heated parts of the bike are cold before carrying out the following instructions.
2. Position the motorcycle on a side stand (we recommend a racing stand). Make sure, that surface is solid and flat.
3. Unscrew and remove bolts A on both sides of the motorcycle (Figure 1) ; unscrew the brake lines on both sides of
the motorcycle (Figure 2) and remove stock fender (Figure 3).
4. Reposition collars C and rubber mounts B (Figure 4, 5) from stock fender to Akrapovic carbon fiber fender
. Position the Akrapovic carbon-fiber fender in its location on the motorcycle, using stock bolts A (Figure 7, 8), re-
attach the brake lines on both sides of the motorcycle (Figure 9). Make sure that carbon-fiber fender is centered with
respect to the motorcycle and tighten bolts A securely

Incoming search terms:

2006-2008 Honda TRX 450R SR4 4 Stroke Carbon racing system INSTALLATION

0

Filed Under (Honda) by admin on 25-12-2011

download
Removal of the stock exhaust, 1. Loosen stock tail pipe clamp (Fig 1) 2. Unbolt and remove stock muffler (Fig 2) 3. Remove stock header pipe (Fig 3) Installation Motoworks exhaust 1. Install Motoworks header pipe using stock nuts, finger tight at this point ( Fig 4) 2. Install Motoworks tailpipe with muffler using bolt and spacer supplied in kit on upper rear mount, use stock nut and bolt on lower mount finger tight at this point. (Fig 5 and 6) 3. Torque header pipe nuts to 1.0 kg-m ( 7.3 lb-ft ) 4. Torque tailpipe mounting bolts to 2.5 kg-m ( 18 lb-ft ) 5. Re-check all your work 6. We recommend that you clean the entire exhaust system with a mild detergent, i.e. glass cleaner prior to starting as any oily residue may cause permanent staining. 1 Instruction sheet 1 Stainless header pipe 50-1002A 1 Tailpipe with SR4 Carbon muffler 51-1002 1 8mmx1.25x65mm flange bolt 70-100-100 1 Aluminum spacer 8mmx7mmx32 SA4 1 Header pipe port flange PF8 1 Spark arrestor 75-100-01 2 Motoworks stickers 07-1002 1340 North Melrose Drive, Vista, CA 92083 Phone 951-587-9222 Fax 760-758-5991 Email: info@motoworks.com
7. Before operating check for proper clearance between Motoworks exhaust and ATV i.e. frame, plastic, brake line, fuel line etc if problems exist re-check work . Note: It is normal for the new exhaust to emit white smoke the first time you start the ATV. This is from the oil used during manufacturing.

2006 TRIUMPH SPEED TRIPLE ALUMINUM, CARBON FIBER, SLIP-ON EXHAUST SYSTEM INSTALLATION

0

Filed Under (Triumph) by admin on 30-10-2010

download
1) Place the motorcycle in a vise or on it’s stand and make sure it is safe and secure. 2) Remove the right side muffler heat shield. Loosen the right side muffler inlet clamp. Remove and retain the muffler mounting bolt and nut. Remove the right side muffler from the motorcycle. 3) If the gasket remained on the stock muffler inlet tube, remove it and inspect. Replace if necessary and then install onto the Jardine muffler inlet tube. 4) Slide the Jardine muffler into the stock s-bend outlet. 5) Attach the rubber strip to the inside of one supplied muffler clamp. Slide the muffler clamp over the muffler withe the offset facing inward. Squeeze both muffler clamp tabs together and secure it to the muffler mounting bracket using the original bolt and nut. Do not fully tighten yet. 6) Adjust the muffler so it is straight and fully tighten the t-bolt clamp, then the muffler clamp hardware. 7) Repeat steps #2-6 for the left side muffler. 8) Clean all fingerprints from the muffler. Start the motorcycle and check for any exhaust leaks. Ratchet 12mm Socket 12mm Wrench Spring Tool or Needlenose Pliers 2 – Mufflers (Left & Right) 2 – Muffler Clamps 2 – Rubber Strips SLIP-ON EXHAUST SYSTEM TRIUMPH SPEED TRIPLE 2006 18-7008-123-02 ALUMINUM 18-7008-323-02 CARBON FIBER PERFORMANCE DELIVERED! All Jardine products are warranted against defective materials and workmanship for a period of 90 days from date of original consumer purchase. Any non-defective item may be returned within 7 working days, and will be subject to a 20% restocking/repackaging fee. WHATIS WARRANTED: Any Jardine product returned, with prior approval, for defective materials or workmanship including chrome blistering, peeling, bubbling, or any unused (new) Jardine product with rust damage

CF2000 CARBON FIBRE SEGMENTED PLATES REMOVAL

0

Filed Under (Honda) by admin on 11-11-2011

download
Patent Pending. • New Friction material segments increase efficiency and plate life. • High static & dynamic coefficient of friction for smooth, positive engagement and release. • Segmented™ plates are available in Carbon
Fibre CF2000 friction material. • Segmented™ plates run 25% cooler and torque load is increased by 20%.
• Will not contaminate engine or primary oils. • Compatible with stock steel plates, springs and all oil

Incoming search terms:

TOYOTA FJ CRUISER 2007 TRD ALLOY WHEEL

0

Filed Under (Uncategorized) by admin on 21-09-2011

download
Care must be taken when installing this accessory to ensure damage does not occur to the vehicle. The installation of this accessory should follow approved guidelines to ensure a quality installation.
These guidelines can be found in the “Accessory Installation Practices” document. This document covers such items as:-
• Vehicle Protection (use of covers and blankets, cleaning chemicals, etc.).
• Safety (eye protection, rechecking torque procedure, etc.).
• Vehicle Disassembly/Reassembly (panel removal, part storage, etc.).
• Electrical Component Disassembly/Reassembly (battery disconnection, connector removal, etc.

Incoming search terms:

DUCATI MONSTER S4R And DUCATI MONSTER S2R EXHAUST SYSTEM Installation instructions

0

Filed Under (Ducati) by admin on 26-10-2010

download
REMOVAL OF STOCK EXHAUST SYSTEM: 1. Put the motorcycle on a side stand, we recommend a racing stand. Make sure, that surface is solid and flat. 2. Remove stock heat shields (Figure 1, 2) 3. Unscrew the bolts from the metal clamps at the muffler – collector joints (Figure 3, 4). T-handle 10mm wrench T-handle 12mm wrench T-handle 13mm wrench T-handle 3mm three hexagon key wrench T-handle 5mm three hexagon key wrench Combination 13mm wrench Spring puller Figure 1 Figure 2 Figure 3 Figure 4
NAV – 124 3 Figure 10 Figure 7 Figure 8 4. Unscrew the bolt from the muffler chassis hanging bracket and remove both mufflers with link pipes (Figure 5, 6). INSTALLATION OF THE AKRAPOVIC SLIP-ON EXHAUST SYSTEM: 1. Slide the link pipes onto the stock collector (Figure 7) hand tighten the metal clamps at the Akrapovic link pipe – stock collector joints; coat the interior side of the metal clamps and the clamp bolts with Akrapovic anti-seizing copper paste (black tube) (Figure 8). 2. Install Akrapovic carbon-fiber chassis hanging bracket (Figure 9, 10). 22Nm 16ftlb Figure 5 Figure 6 Figure 9 NAV – 124 4 Figure 15 3. Position the muffler correctly and slide it onto the outlet side of the link pipes and attach the springs; WARNING! make sure, that springs pull the muffler all the way onto the link pipes – use rubber mallet if necessary to tap the connections into place! (Figure 11, 12). 4. Correctly position the carbon-fiber clamp and slide it onto the muffler – bear in mind the left offset of the carbon-fiber clamp viewed from the rear. WARNING: open the clamp slightly wider than the diameter of the outer sleeve of the muffler – do not scrape it along the muffler outer sleeve! (Figure 13). Tighten the carbon-fiber clamp onto the Akrapovic carbon- fiber chassis hanging bracket (Figure 14, 15). Make sure the link pipes or muffler are not touching the frame or any other part of the motorcycle.

Ducati 1098/ 848 Exhaust System with Carbon Fiber Installation Instructions

0

Filed Under (Ducati) by admin on 25-10-2010

download
- Install barrel clamps to both slip-on tubes. – Install mufflers and attach using the 8mm bolts and 8mm split lock washers provided. – Align mufflers and tighten the 6x14mm V.A.L.E.™ hardware when the slip-on tube clearance and the muffler alignment is correct. (It may be easier to tighten one bolt first, then remove the slip-on tube assembly to tighten all of the rest of the hardware. – Tighten barrel clamps. Double check all your work to make sure the mufflers are aligned and all hardware is tightened. Before you run the bike, clean off all fingerprints and dirt, as any oily residue will etch the metal and become somewhat permanent when the system gets hot. Run the bike and enjoy. It is normal for some white smoke to appear the first time you start the bike. This is packing/ manufacturing oil from inside the pipe burning off. Check for gaps or leaks. If you find a leak, a little high temperature silicon sealant should fix it. After 50 to 100 miles, recheck all fasteners for tightness

KAWASAKI ZX-10R Carbon Fiber/ Aluminum Slip-On System Installation Manual

0

Filed Under (Kawasaki) by admin on 25-10-2010

download
After bike is cool make sure the bike is secured before beginning the installation. 2 Remove the rear exhaust heat shield/cover from the OEM muffler. Remove the side fairing covers on both sides of the bike (this will allow you access to the seat bolts). Remove the rider seat. 3 Remove the exhaust valve cables located under the seat. Keep the servo motor plugged in (do not unplug the server motor). See figure 2. 4 Unbolt the rear foot peg muffler mount, loosen the assembly mount (header collector clamp) and unbolt the exhaust mounting bolt (figure 3). Remove the stock muffler assembly with the exhaust valve cables. Re-install the seat, seat bolts, and side fairings. 5 Apply a small amount of high temperature silicone (such as Permatex Ultra Black) to the inside of the exhaust inlet. 6 Attach the LOR exhaust canister to the slip-on tube adapter with the spring tabs aligned (make sure your hands are protected with a pair of gloves in case the tubes slip). You may have to squeeze the mid-pipe adapter tube to fit into the exhaust inlet as the mandrel bends may become slightly out of round due to a cut near the bend (the tube will take form once connected). Slide the canister all the way until the slip-on adapter seats fully against the exhaust inlet. Wipe off any excess silicone. 7 Place each spring over the exhaust side spring tabs and use the spring tool to pull the springs over the adapter spring tabs. Both springs must be secured for proper installation. 8 Apply a small amount of silicone sealer (such as permatex Ultra Black or Ultra Copper) to the inside (inlet side) of the slip-on adapter. Slide the low profile barrel clamp over the LevelOne Adapter pipe. Slide the slip-on adapter pipe over the stock header collector. Do not fully tighten the barrel clamp

HONDA XL 1000 V VARADERO 2005 AKRAPOVIC SLIP- ON SP SERIES EXHAUST SYSTEM

0

Filed Under (Honda) by admin on 21-11-2011

download
coat the bolt and interior side of the metal clamp with Akrapovic anti-seize lead-free copper paste (black tube)
2. correctly position and install the graphite inner sleeve and metal clamp 3. slide the link pipe onto the stock collector 4. hand tighten the bolt of the link pipe bracket 5. make sure the link pipes are not touching the frame and other parts 6.
perform the process on both sides of the motorcycle installing the muffler: 1. position the muffler correctly and slide it onto the outlet side of the link pipe (Figure 17) 2. attach the springs at the muffler – link pipe joint (Figure 18) 3. correctly position the carbon-fiber clamp and slide it onto the muffler – bear in mind the left offset of the carbon-fiber clamp for the right muffler and the right offset for the left muffler viewed from the rear. WARNING: open the clamp to slightly wider than the diameter of the outer sleeve of the muffler – do not scrape it along the muffler outer sleeve! (Figure 19) 4. hand tighten the carbon-fiber clamp onto the stock chassis hanging bracket – use the bolts, washer and spacers supplied in the Akrapovic kit. Do not fully tighten. Make sure the additional parts from the Akrapovic kit are correctly installed. (Figure 20, 21, 22) 5. make sure the muffler is not touching other parts of the motorcycle 6. perform the process on both sides of the motorcycle final installation: 1. tighten the bolt of the link pipe bracket (Figure 23) 2. tighten the carbon-fiber clamp (Figure 24) 3. tighten the metal clamp at the Akrapovic link pipe – stock collector joint (Figure 25) 4. perform the process on both sides of the motorcycle 5. clean grease spots: a. muffler – titanium outer sleeve: use a soft cloth sprayed with a multi-purpose spray lubricant (WD-40 or equivalent) b. muffler – carbon-fiber outer sleeve: use a soft dry cloth c. stainless steel link pipe: use a soft cloth sprayed with a contact cleaner, then wipe with a soft dry cloth Cleaning will prevent spots from burning onto the surface. Do not use aggressive chemical cleaners, because they can damage the sticker. 6. reattach side panels (Figure 26) 7. reconnect the electric connectors for turn signal lamps (Figure 27) 8. reattach the cable for locking / unlocking the seat (Figure 28) 9. reattach the passenger handlebars and top case plate (Figure 29, 30, 31, 32) 10. reattach both seats (Figure 33) 11. position of the installed Akrapovic Slip-on SP series system (Figure 34)

1999 Ducati 900 Super Sport Carbon Fiber INSTALLATION MANUAL

0

Filed Under (Ducati) by admin on 25-10-2010

download
I. Stock muffler removal: refer to diagram #1 *All hardware removed in this procedure must be saved for reinstallation. See Figure 2* 1. Loosen the Allen bolt holding the exhaust bracket to the rear foot peg mount. (It may be easier to turn the nut first then the Allen bolt) 2. Remove the nut and then support the muffler while removing the Allen bolt. Be careful not to loose the washer since it will now just drop out. 3. Now slide the spacer from the foot peg support and remove the muffler by sliding it straight out of the header. 4. Now remove the two rubber bushings and put aside so they won’t fall out and become lost. 5. Repeat the procedure for the other muffler. Parts you will need to reuse. x2 Diagram 1 I. Forza installation: refer to diagram #2 1. Determine the left muffler from the right. The Forza sticker faces out and the inlet pipes bend in slightly. See figure 3. 2. Slide the muffler onto its respective header pipe. 3. Replace the two rubber bushings in the foot peg mounts. 4. Slide the muffler clamp over the muffler and align with the bushings. 5. Squeeze the muffler clamp by hand and insert the spacer first: through both holes in the clamp and second: through both bushings. The clamp should be on the outside of the foot peg support (see diagram2). 6. Install the washer then the nut and snug the nut leaving it loose enough to allow muffler to rotate in the clamp. 7. Turn the pipe until the exhaust tip is pointed down. Then check that the muffler clears the swing arm. 8. Repeat the procedure for the other side.

Incoming search terms: