852 suppliers of alloy email co ltd mail

You search Auto repair manual PDF 852 suppliers of alloy email co ltd mail, if there are search results will appear below. If search results do not exist, please search by others keyword.





TOYOTA FJ CRUISER 2007 TRD ALLOY WHEEL

0

Filed Under (Uncategorized) by admin on 21-09-2011

download
Care must be taken when installing this accessory to ensure damage does not occur to the vehicle. The installation of this accessory should follow approved guidelines to ensure a quality installation.
These guidelines can be found in the “Accessory Installation Practices” document. This document covers such items as:-
• Vehicle Protection (use of covers and blankets, cleaning chemicals, etc.).
• Safety (eye protection, rechecking torque procedure, etc.).
• Vehicle Disassembly/Reassembly (panel removal, part storage, etc.).
• Electrical Component Disassembly/Reassembly (battery disconnection, connector removal, etc.

Harley Davidson BoonDocker Nitrous System Installation MANUAL

0

Filed Under (Harley Davidson) by admin on 01-03-2012

download
BoonDocker Liquid Nitrous – 1589 Hollipark Dr. Idaho Falls, ID 83401 – (208) 542-4411 web site: www. boon dockers. com – email: info@boon dockers. com Revised 02-27-04 Page 2 of 10 This manifold is also designed to vary the float bowl pressure in relation to nitrous pressure, thus keeping the nitrous and fuel delivery in sync. Fluctuations in bottle temperature greatly affect nitrous pressure, which affects nitrous delivery. By automatically adjusting the fuel delivery as nitrous pressure varies, this manifold makes nitrous safe, reliable, and easy to use. Be sure to understand and follow the tuning instructions at the end of these instructions. Proper tuning is an important part of any performance-enhancing product. Part I – Bottle Installation A. Bottle Valve Fittings Insert the 4AN x 1/8″ NPT fitting and the 1/8″ NPT Plug into the bottle valve (these are attached to the lid of the box for the bottle) . Use Teflon tape to seal the threads – be sure not to get tape inside the threads! B. Bottle Mounting Position With nitrous in the bottle, both nitrous liquid and nitrous gas are present under high pressure (760 psi at 70 deg F) . Due to gravity and acceleration forces, the liquid portion of the nitrous will be at the bottom and rearward parts of the bottle. For this nitrous system to work properly, it is important that nitrous liquid be drawn from the bottle. Nitrous vapor will cause a significant decrease in performance. For best results, the bottle should be mounted so the valve is pointed down and towards the back of the vehicle as shown below. ************** *************** ******** ********* *************** (can be installed on top or bottom of air boot) ********** ********* push-button switch (mounts on handlebar) +12 V *********** ************ **** ****** *! “**#$******%* *! “**#$*#*%* 20 deg to 90 Front of motorcycle Rear of motorcycle BoonDocker Liquid Nitrous – 1589 Hollipark Dr. Idaho Falls, ID 83401 – (208) 542-4411 web site: www. boon dockers. com – email: info@boon dockers. com Revised 02-27-04 Page 3 of 10 Bottle mounted inside airbox: For some applications, a small bottle can be mounted inside the airbox as shown. Note: because of the restricted space, it was necessary to mount this bottle at a non-optimal angle (the valve is pointed towards the front instead of the rear)

Incoming search terms:

DMCA

0

Filed Under () by admin on 23-05-2017

Digital Millennium Copyright Act (DMCA) Notice

We are in compliance with 17 U.S.C. $ 512 and the Digital Millennium Copyright Act (“DMCA”). It is our policy to respond to any infringement notices and take appropriate actions under the Digital Millennium Copyright Act C’DMCA”) and other applicable intellectual property laws.

If your copyrighted material has been posted on our website or if hyperlinks to your copyrighted material are returned through our search engine and you want this material removed, you must provide a written communication that details the information listed in the following section. Please be aware that you will be liable for damages (including costs and attorneys’ fees) if you misrepresent information listed on our site that is infringing on your copyrights. We suggest that you first contact an attorney for legal assistance on this matter.

The following elements must be included in your copyright infringement claim:

1. Provide evidence of the authorized person to act on behalf of the owner of an exclusive right that is allegedly infringed.
2. Provide sufficient contact information so that we may contact you. You must also include a valid email address.
3. You must identify in sufficient detail the copyrighted work claimed to have been infringed and including at least one search term under which the material appears in our search results.
4. A statement that the complaining party has a good faith belief that use of the material in the manner complained of is not authorized by the copyright owner, its agent, or the law.
5. A statement that the information in the notification is accurate, and under penalty of perjury, that the complaining party is authorized to act on behalf of the owner of an exclusive right that is allegedly infringed.
6. Must be signed by the authorized person to act on behalf of the owner of an exclusive right that is allegedly being infringed.

Send the infringement notice via contact form with “DMCA Complaint” as your subject line otherwise we won’t be able to process your complaint.

Please allow up to a week for an email response. Note that emailing your complaint to other parties such as our Internet Service Provider will not expedite your request and may result in a delayed response due to the complaint not being filed properly.

Incoming search terms:

2010 Toyota Motorsports/ TRD USA Contingency Award Program

0

Filed Under (Toyota Manuals) by admin on 29-09-2011

download
To enroll in the program, complete the registration form included in the enclosed material and mail, fax or e-mail it to TRD per the instructions at the bottom of the form. Contact personnel are listed on the attached 2010 Contingency Award Guidelines sheets. These people are available to assist you throughout the year. Parts Ordering: If you are planning to order Toyota parts during 2010 you must supply us with your Visa or Master Card credit card number at the time you register in the program. There is a line on the registration form for this number. See the attached Parts Ordering Guidelines for detailed information on how to order parts. TRD is looking forward to working with each of you, and we wish you a very successful year with your racing program

Incoming search terms:

Aprilia Mana 850 Technical Specifications

0

Filed Under (Aprilia) by admin on 06-11-2010

download
Engine: Aprilia 90° longitudinal V twin four stroke. Liquid cooled. Single overhead cam with chain drive, four valves per cylinder Fuel: Unleaded petrol Bore x Stroke: 88 x 69 mm Total displacement: 839,3 cc Compression ratio: 10:1 Maximum power at the crank: 56 kW (76.1 HP) at 8,000 rpm Maximum torque at the crank: 7.45 kgm (73 Nm) at 5,000 rpm Fuel system: Integrated engine management system. Weber Marelli electronic fuel injection with one 38 mm throttle body Ignition: Digital electronic ignition, with two spark plugs per cylinder, integrated with fuel injection system Starting: Electric Exhaust: Two in one system in 100% stainless steel with three-way catalytic converter and Lambda probe Generator: 450 W at 6000 rpm Lubrification: Dry sump with separate oil reservoir Gear box: Sequential with manual or automatic mode selectable by the user. 7 ratios in manual mode. 3 mappings (Touring, Sport, Rain) in automatic mode. Gear change by pedal or handlebar control. The user can switch from automatic to sequential mode at any moment. Clutch: Automatic Primary drive: Belt Final drive: Chain Frame: High strength steel trellis Front suspension: 43 mm upside-down fork. Wheel travel: 120 mm. Rear suspension: Aluminium alloy single-piece swingarm. Hydraulic shock absorber adjustable in spring preload and rebound damping. Wheel travel: 125 mm Brakes: Front: double stainless steel floating disc (Æ 320 mm). Radial calipers with four pistons Rear: stainless steel disc (Æ 260 mm). Single piston caliper Wheels: Aluminium alloy. Front: 3.50 x 17″ Rear: 6.00 x 17″ Tyres: Radial tubeless. Front: 120/70 ZR 17 Rear: 180/55 ZR 17 Dimensions: Overall length: 2080 mm Overall width: 800 mm (at handlebars) Overall height: 1130 mm Seat height: 800 mm Wheelbase: 1463 mm Trail: 103 mm Rake angle: 24° Fuel tank capacity: 16 litres Other: Colours, specifications and technical data may be subject to change without prior notice.

APRILIA SL 750 SHIVER Technical Specifications

0

Filed Under (Aprilia) by admin on 06-11-2010

download
Engine Aprilia V90 Four stroke longitudinal 90° V twin. Liquid cooling. Double overhead camshaft with mixed gear/chain drive; four valves per cylinder. Fuel Unleaded petrol. Bore x stroke 92 x 56.4 mm Total displacement 749.9 cc Compression ratio 11 : 1 Maximum power at the crank 95 HP at 9000 rpm. Maximum torque at the crank 8.25 kgm at 7000 rpm. Fuel system Integrated engine management system. Injection with Ride by Wire technology control of the throttle bodies Ignition Digital electronic, integrated with the injection, two spark plugs per cylinder Starting Electric Exhaust Two in one system in 100% stainless steel with three-way catalytic converter and Lambda probe Generator 450 W at 6000 rpm. Lubrication Wet sump Gearbox six speed, transmission ratio: 1° 36/14 (2.57) 2° 32/17 (1.88) 3° 30/20 (1.5) 4° 28/22 (1.27) 5° 23/26 (0.88) 6° 24/25 (0.96) Clutch Multi-plate in oil bath, cable operated. Primary drive Spur gears, transmission ratio: 60/31 (1.75) Final drive Chain Transmission ratio: 16/44 Frame Dismountable steel trellis connected with high strength bolts to aluminium side plates. Dismountable rear frame. Front suspension 43 mm upside-down fork. 120 mm wheel travel Rear suspension Aluminium alloy swingarm with reinforcement truss. Hydraulic shock absorber adjustable in spring preload and rebound damping. Wheel travel: 130 mm. Brakes Front: Double stainless steel floating disc (Ø 320 mm ). Four piston radial calipers. Metal braided brake line. Rear: Steel disk (∅ 245 mm) with twin piston caliper. Metal braided brake line. Wheels In aluminium alloy Front: 3.50 X 17″ Rear: 6.00 X 17″ Tyres Radial tubeless; front: 120/70 ZR 17 rear: 180/55 ZR 17 Dimensions Overall length 2066 mm Overall width: 815 mm (at handlebars) Overall height: 1132 mm Seat height: 810 mm Wheelbase: 1449 mm Trail: 109 mm Rake angle: 25.7° Dry weight 189 kg Tank capacity 15 lt

Aprilia PEGASO 650 Technical specifications

0

Filed Under (Aprilia) by admin on 06-11-2010

download
Engine Single-cylinder four-stroke with light alloy cylinder. Liquid cooling with three way pressurised circuit. Single overhead cam with chain timing drive; four valves. Anti-vibration balancer shaft. Euro 3. Fuel Unleaded fuel. Bore and stroke 100 x 84 mm. Total displacement 660 cc. Compression ratio 10:1. Max. power at crankshaft 48 HP (35 kW) at 6,000 rpm. Max. torque at crankshaft 6.01 kgm ( 59 Nm) at 5,000 rpm. Fuel system Integrated electronic engine management system. Electronic fuel injection. 44 mm throttle body. Ignition Electronic. Starting Electric starter. Alternator 290 W Lubrication Dry sump with oil pump. Gearbox 5 speed. Transmission ratios: 1st 12/30 2 nd 16/26 3rd 20/23 4th 22/20 5th 26/20 Clutch Multi-plate in oil bath. Cable operated. Primary drive Spur gears. Transmission ratio: 36/75. Final drive Chain. Transmission ratio: 15/44. Frame Steel, open cradle, single spar frame. Front suspension 45 mm fork. Wheel travel 140 mm. Rear suspension High strength steel swingarm. Aprilia Progressive System (APS) rising rate linkages. Sachs hydraulic monoshock with adjustable rebound and preload. Wheel travel 130 mm. Brakes Front: stainless steel floating disc, ∅ 320 mm, four piston caliper. Rear: stainless steel disc, ∅ 240 mm, two piston caliper. Wheels Alloy wheels with twinned spokes. Front: 3.50 x 17″. Rear: 4.50 x 17″.

Vespa Zafferano 125cc (50cc) Specification

0

Filed Under (Vespa) by admin on 11-11-2010

download
single cylinder four stroke LEADER, with two-way catalytic converter and secondary air system (Single-cylinder Hi-Per2 two-stroke, with two-way catalytic converter and secondary air system) Capacity 124cc (50cc) Cooling Forced Air Starter Electric and kick starter Transmission Automatic Twist and Go Front suspension Single arm link with coil spring and double acting hydraulic shock absorber Rear suspension Coil spring and double acting hydraulic shock absorber Front wheel Die-cast aluminium alloy 2.50×11″ Rear wheel Die-cast aluminium alloy 3.10×10″ Front tyre Tubeless 110/70-11″ Rear tyre Tubeless 120/70-10″ Front brake 200 mm steel disc Rear brake 110 mm drum Length/Width/Height 1,800/740 mm (1,755/740 mm) Seat height 785 mm (775 mm) Running weight 110 kg (96 kg) Fuel tank capacity 8.6 litres Emissions Homologated to Euro 3 (Homologated to Euro 2) Colours Taormina (Mandarino)

APRILIA SMV 750 DORSODURO Technical Specifications

0

Filed Under (Aprilia) by admin on 07-11-2010

download
Engine Aprilia V90 four stroke longitudinal 90° V twin. Liquid cooling. Double overhead camshaft with mixed gear/chain drive; four valves per cylinder. Fuel Unleaded petrol. Bore x stroke 92 x 56.4 mm. Total displacement 749.9 cc. Compression ratio 11 : 1. Maximum power at the crank 67.3 kW (92 HP) at 8750 rpm. Maximum torque at the crank 8.4 kgm (82 Nm) at 4500 rpm. Fuel system Integrated engine management system. Electronic fuel injection with ride-by-wire electronic throttle control. Ignition Digital electronic, integrated in the fuel injection system. Starting Electric. Exhaust Two in one system in 100% stainless steel with three-way catalytic converter and Lambda probe. Alternator 450 W at 6000 rpm. Lubrication Wet sump. Gearbox Six speed. Transmission ratios: 1 st 14/36 (2.57) 2 nd 17/32 (1.88) 3 rd 20/30 (1.5) 4 th 22/28 (1.27) 5 th 23/26 (1.13) 6 th 24/25 (1.04) Clutch Hydraulically operated multi-plate wet clutch. Primary drive Spur gears. Transmission ratio 38/71 (1.87). Final drive Chain. Transmission ratio 16/46. Frame Modular steel trellis secured to aluminium side plates by high strength bolts. Detachable rear frame. Front suspension 43 mm upside-down fork. 160 mm wheel travel. Rear suspension Aluminium alloy swingarm. Hydraulic shock absorber adjustable in spring preload and rebound damping. Wheel travel: 160 mm. Brakes Front: Double stainless steel floating disc (Ø 320 mm) . Four- piston radial calipers. Metal braided brake line. Rear: Stainless steel disc (∅ 240 mm) with single piston caliper. Metal braided brake line. Wheels Aluminium alloy. Front: 3.50 x 17″. Rear: 6.00 x 17″. Tyres Radial tubeless. Front: 120/70 ZR 17. Rear: 180/55 ZR 17. Dimensions Overall length: 2216 mm Overall width: 905 mm (at handlebars) Overall height: 1185 mm (at instruments) Seat height: 870 mm Wheelbase: 1505 mm Trail: 108 mm Rake angle: 26° Weight: 186 kg Tank capacity 12 litres (autonomy > 200 km)

Aprilia RXV and SXV 550 cc engine specifications in brackets – Technical specifications

0

Filed Under (Aprilia) by admin on 06-11-2010

download
Engine 77° V twin four stroke. Liquid cooled. Single overhead cam with rocker operated exhaust valves, chain timing drive, 4 valve heads, titanium valves. Fuel Lead-free petrol. Bore x stroke 76 x 49.5 mm (80 x 55 mm) Total displacement 449 cc (549 cc). Compression ratio 12.5:1 (12:1). Fuel system Integrated engine management system controlling ignition and fuel injection. Throttle body: 38 mm. (40 mm) Ignition Electronic. Starting Electric starting. Alternator 340 W. Lubrication Dry sump with external oil tank. Separate gearbox lubrication. Gearbox 5 speed. Enduro gear ratios: 1st 12/31 2nd 13/25 3rd 15/23 4th 19/24 5th 21/22 Clutch Multiple discs in oil bath, cable operated. Primary drive Spur gears. Transmission ratio: 22/56. Final drive Chain. Transmission ratio: 15/48. Frame Steel perimeter frame with alloy vertical members. Front suspension Ø 45 mm upside down fork, double adjustment. Rear suspension Box section aluminium swingarm with cast body. Hydraulic monoshock with compression and rebound adjustment. Brakes Front: Ø 270 mm stainless steel disc with floating caliper. Rear: ∅ 240 mm stainless steel disc with floating caliper. Wheels Light alloy. Front: 1.60 x 21″ Rear: 2.15 x 18″ Tyres Front: 90/90 x 21″
Rear: 140/80 x 18″ Dimensions Overall length: 2,222 mm Overall width: 800 mm Ground clearance: 396 mm Seat height: 996 mm Wheelbase: 1,495 mm Fuel tank Capacity 7.8 litres Colours Aprilia Black / Fluo Red