973 petroleum products suppliers co wll es mail

You search Auto repair manual PDF 973 petroleum products suppliers co wll es mail, if there are search results will appear below. If search results do not exist, please search by others keyword.





FC Shock Spring Installation Guide

0

Filed Under (Tips and Review) by admin on 14-12-2010

download
Installation: 1. Remove the fork springs according to the OEM Owner’s Manual. 2. Check/adjust fork oil level and weight according to OEM Specifications. Caution: Most inverted forks will not require the use of any shim washers or spacers. In cases where use is necessary with the twin chamber style fork, the shims must be placed at the bottom of the spring. Most conventional forks (non-inverted) will use shim washers or spacers at the top of the fork spring. 3. Install Factory Connection fork springs and refer to OEM Owner’s Manual for proper assembly procedures. 4. Be sure to double check all fasteners. Note: Most modern day forks require special tools for disassembly and assembly of the components. Examples : Showa 47/49mm Twin Chamber, KYB 48mm Twin Chamber, WP 07 SX Models/SXS Components. Installing fork springs is an intricate process that should be performed with extreme care by a qualified suspension technician. Failure to install the springs correctly could cause damage to one or more components of the fork. This damage, although not readily apparent, could lead to unexpected failure or rider injury. Factory Connection manufactures models specific fork springs. Installation of a Factory Connection spring not designed for your motorcycle may result in unexpected failure and rider injury. Please consult your Factory Connection spring dealer or call Factory Connection directly if you are unsure about a spring/or springs. 1. Factory Connection’s Limited Lifetime Warranty Factory Connection warrants, to the original retail purchaser (“consumer”) who retains ownership of the vehicle on which the suspension spring(s) (“products(s)”) was originally installed, all suspension springs for life against factory defects in material and workmanship (other than defects in finish) when used under normal use and operating conditions. 2. Your Remedy Upon verification of warranty coverage, Factory Connection at its option will replace defective or prematurely worn-out product (s), without charge, or refund the purchase price of the products(s). This is the Consumer’s sole and exclusive remedy for any loss or damage, however arising, due to a nonconformity or defect in the product(s). 3. Warranty Claim Procedure To make claim under this warranty, the consumer should contact the Factory Connection dealer or Factory Connection where the product(s) was purchased. Factory Connection reserves the right to test the returned product(s) to evaluate the nonconformity or possible defect. The Consumer is responsible for all costs of returning the defective or prematurely worn-out product(s) to the Factory Connection dealer as well as all costs for removing the product(s) from and installing the products(s) on the vehicle.

Incoming search terms:

Triumph Speed Triple Installation Instructions

0

Filed Under (Triumph) by admin on 30-10-2010

download
1. Remove OEM Tail Unit from Motorcycle (ref: underside four socket head bolts). 2. Disconnect all electrical connections (ref: Turn indicators & License light). 3. Remove Turn indicators from OEM Tail unit and install on to Skyking Products License Plate Relocation Assembly using OEM hardware. 4. Remove License light from OEM Tail unit and install on to Skyking Products License Plate Relocation Assembly using OEM hardware. 5. Reconnect all electrical connections. Install wire loom for connector protection and secure with tie wraps . (ref: Turn indicators & License light). 6. Install Skyking Products License Plate Relocation Assembly using OEM hardware. 7. Double check all hardware and electrical are secure. 8. Check proper operation of Turn indicators and license light. 9. Test ride and final check proper operation of Turn indicators and license light.

Incoming search terms:

Toyota Body & Paint Preferred Partner Program

0

Filed Under (Toyota Manuals) by admin on 29-05-2011

Download
That’s why Toyota has created the innovative Body & Paint Preferred Partner Programme. Having tested a wide range of Body & Paint repair products, Toyota has selected a number of companies whose products are of the highest calibre and offer superior results, and who offer reliable, Europe-wide distribution and support. It recommends that all Toyota Authorised Repairers across Europe use products supplied by these companies. They are of course free to choose which supplier they work with from this list of recommendations. Whilst Toyota has negotiated competitive parameters with each partner, exact contract details should be agreed between the partner and the Toyota Authorised Repairer. The programme allows savings made to be reinvested into further improvement of Body & Paint activities

Incoming search terms:

2003 SUZUKI SV 1000 Service Manual

0

Filed Under (Suzuki) by admin on 26-02-2011

download
HOW TO USE THIS MANUAL TO LOCATE WHAT YOU ARE LOOKING FOR : 1. The text of this manual is divided into sections . 2. The section titles are listed in the GROUP INDEX . 3 . Holding the manual as shown at the right will allow you to find the first page of the section easily . 4. The contents are listed on the first page of each section to help you find the item and page you need . COMPONENT PARTS AND WORK TO BE DONE Under the name of each system or unit, is its exploded view . Work instructions and other service information such as the tightening torque, lubricating points and locking agent points, are provided . Example: Front wheel SYMBOL Listed in the table below are the symbols indicating instructions and other information necessary for servicing. ENGINE OIL SUZUKIrecommends the use of SUZUKI PERFORMANCE 4 MOTOR OIL or an oil which is rated SF or SG under the API (American Petroleum Institute) service classification. The recommended viscosity is SAE 1 OW-40 . If an SAE 1 OW-40 oil is not available, select an altematice according to the right chart . BRAKE FLUID Specification and classification: DOT 4 A WARNING Since the brake system of this motorcycle is filled with a glycol-based brake fluid by the manufacturer, do not use or mix different types of fluid such as silicone-based and petroleum-based fluid for refilling the system, otherwise serious damage will result . Do not use any brake fluid taken from old or used or unsealed containers . Never re-use brake fluid left over from a previous servicing, which has been stored for a long period. FRONT FORK OIL Use fork oil L01 or an equivalent fork oil . GENERAL INFORMATION 1-5 ENGINE COOLANT Use an anti-freeze/engine coolant compatible with an aluminum radiator, mixed with distilled water only . WATER FOR MIXING Use distilled water only . Water other than distilled water can corrode and clog the aluminum radiator . ANTI-FREEZE/ENGINE COOLANT The engine coolant perform as a corrosion and rust inhibitor as well as anti-freeze . Therefore, the engine coolant should be used at all times even though the atmospheric temperature in your area does not go down to freezing point. Suzuki recommends the use of SUZUKI COOLANT anti-freeze/engine coolant. If this is not available, use an equivalent which is compatible with an aluminum radiator . LIQUID AMOUNT OF WATER/ENGINE COOLANT

Incoming search terms:

2010 Toyota Motorsports/ TRD USA Contingency Award Program

0

Filed Under (Toyota Manuals) by admin on 29-09-2011

download
To enroll in the program, complete the registration form included in the enclosed material and mail, fax or e-mail it to TRD per the instructions at the bottom of the form. Contact personnel are listed on the attached 2010 Contingency Award Guidelines sheets. These people are available to assist you throughout the year. Parts Ordering: If you are planning to order Toyota parts during 2010 you must supply us with your Visa or Master Card credit card number at the time you register in the program. There is a line on the registration form for this number. See the attached Parts Ordering Guidelines for detailed information on how to order parts. TRD is looking forward to working with each of you, and we wish you a very successful year with your racing program

Incoming search terms:

BMW R1200GS/ ADVENTURE RACING EXHAUST SYSTEM Installation instructions

0

Filed Under (BMW) by admin on 26-10-2010

download
1. The manufacturer, importer or dealer shall not be liable for any incidental damage including personal injury or any other damages caused by improper installation or operation of the Akrapovic exhaust system. When installing the Akrapovic exhaust system be careful that the exhaust system does not touch other parts sensitive to high temperature. 2. Akrapovic makes no representation or warranties with regard to damage caused by the improper installation, use and maintenance of the Akrapovic exhaust system. The warranty is limited to defects recognized by our technical department and to normal use, and excludes items subject to normal wear (gaskets and damping wool). The guarantee is void in case of accident, modification, improper or competition use. 3. Do not attempt to install the Akrapovic exhaust system on a motorcycle for which it was not made or tested by Akrapovic. 4. When the exhaust system gets very hot during operation, be careful not to burn yourself on the exhaust system or parts which are in direct contact with it, even when the motor is not running. Also protect other people, especially children, from the injuries mentioned above. 5. In some cases Akrapovic exhaust system kits contain chemical products (ceramic anti-seizing grease; bolt sealant). Handle with care, do not inhale or swallow. Avoid excessive contact with skin, eyes or mucous membranes. Keep out of reach of children. 6. Technical specifications of Akrapovic exhaust systems and related products subject to change without notice

BMW R1200GS Exhaust System Installation instructions

0

Filed Under (BMW) by admin on 26-10-2010

download
The manufacturer, importer or dealer shall not be liable for any incidental damage including personal injury or any other damages caused by improper installation or operation of the Akrapovič exhaust system. When installing the Akrapovič exhaust system be careful that the exhaust system does not touch other parts sensitive to high temperature. 2. Akrapovič makes no representation or warranties with regard to damage caused by the improper installation, use and maintenance of the Akrapovič exhaust system. The warranty is limited to defects recognized by our technical department and due to normal use, and excludes items subject to normal wear (gaskets and damping wool). The guarantee is void in case of accident, modification, improper or competition use. 3. Do not attempt to install the Akrapovič exhaust system on a vehicle model for which it was not made or tested by Akrapovič. 4. When the exhaust system gets very hot during operation, be careful not to burn yourself on the exhaust system or parts which are in direct contact with it, even when the engine is not running. Also protect other people, especially children, from the injuries mentioned above. 5. In some cases Akrapovič exhaust system kits contain chemical products (ceramic anti-seizing grease; bolt sealant). Handle with care, do not inhale or swallow. Avoid excessive contact with skin, eyes or mucous membranes. Keep out of reach of children. 6. Technical specifications of Akrapovič exhaust systems and related products are subject to change without notice. 7. Before removing the original exhaust system from your vehicle, please compare the parts you received with the list of materials provided in the installation manual in order to assure that you have all the parts necessary for the installation of your new Akrapovič exhaust system. 8. Although this manual consists of instructions for installation in written form, as well as photographs and pictures representing individual steps of the installation, please note that the photographs and pictures are symbolic and are intended for representation of general overview only. The photographs and pictures contained herein should serve as a guideline only and actual installation of the exhaust system may not correspond with the photographs and pictures entirely.

Motorcycle Engine Guard Adjustable Light Housing

0

Filed Under (Kawasaki) by admin on 05-11-2010

download
ADJUSTABLE HOUSING This highly polished, adjustable aluminum housing provides a very attractive means of adding the safety of Cuda TriOptic LED lighting to the engine guards on your Police Motorcycle. This newly developed 2.5 X 5.5 inch housing comes mounted on a ball swivel and can be adjusted and tightened to point LED lighting in any desired direction. This compact housing fits conveniently into position on the engine guard and is available with an engine guard clamp in a 1.00 inch or 1.25 inch diameter, which fits the engine guards of most popular motorcycles. The entire assembly is constructed of a highly polished aluminum alloy which blends very nicely with the chrome trim and accessories that are common on most motorcycles. COMPACT , LOW PROFILE CUDA LIGHT Our Engine Guard housing contains a newly developed model of the popular Cuda TriOptic light series with six LEDs positioned in a low profile format. This light housing provides a more compact but equally penetrating light source as the larger Cuda models. BUILT IN FLASHER As is Standard with all Cuda TriOptic products, this model can be programmed, prior to installation, to flash any one of eight selectable flash patterns; making the need for an external flasher unnecessary. EFFECTIVE LIGHT OUTPUT Cuda TriOptic lighting incorporates third generation, high intensity LEDs for dramatically bright light output. This high output light power is further enhanced by specially shaped lenses to ensure superior on and off-axis light distribution for maximum visibility. LOW AMP DRAW In addition to being extremely bright, the LEDs significantly reduce power consumption – a critical concern for fully equipped motorcycles. The 351011 (2-up) model, that is contained in this light housing, draws 0.7 amps per unit. RELIABILITY Cuda TriOptic LEDs are rated for over 100,000 hours of useful life – compared to 2500-5000 hours for a typical halogen bulb. Plus, Federal Signal LED products come with a 5- year warranty, and meet SAE and CAC standards for radio frequency interference. See the back of this page for technical specifications and ordering information so you can start specifying Cuda TriOptic LEDs for your motorcycles today!

HARLEY DAVIDSON FLH AND FLT TRAILER HITCH OR RACK LIGHTING WIRE HARNESS INSTALLATION INSTRUCTIONS

0

Filed Under (Harley Davidson) by admin on 29-01-2011

download
Remove the seat and locate the tail light plug, this should be attached to the frame with a plastic clip where the fender meets the frame cross member. Unplug the connector and plug in the male and female ends of the supplied wire harness. Route the harness as shown following the other wire looms and then down along the main frame of the trailer hitch or your fender support to the bottom of the rear fender. Secure the harness using the supplied cable ties. Install a plug that matches that of your trailer. The wires in the harness functions/colors are as follows: Black = Ground Brown = Tail Light Red = Brake Light Orange = Left Turn signal Blue = Right Turn signal NOTE: If your trailer has only four (4) wires you will need to use a 5 to 4 wire converter. These are available at most auto parts stores or thru RIVCO Products. NOTE: If your trailer uses more than two (2) incandescent tail light bulbs the use of a trailer wiring isolator is strongly advised as this additional load is too much for the motorcycles wiring to support and may cause damage to the electrical system. Trailer wiring isolators are available although not as common in auto parts stores and are also available thru RIVCO Products. If you are installing both you must first install the 5 to 4 wire converter then the isolator then to the trailer plug.

Incoming search terms:

2009 BMW R1300S Slip-On Exhaust System Installation Instructions

0

Filed Under (BMW) by admin on 09-11-2010

download
1. Make sure the bike is completely cool before starting the installation. Make sure the bike is secure on a centerstand or ideally a service lift. 2. Remove heat shield. 3. Loosen muffler joint clamp. 4. Remove muffler mounting bolt. 5. Install TBR slip-on tube to TBR muffler using the supplied socket head cap screws, lockwashers and X-Ring provided. Leave loose for now. 6. Slide rubber lined muffler clamp over TBR muffler. 7. Install TBR muffler assembly to motorcycle using the OEM hardware. Leave loose for now. 8. Align muffler and tighten muffler joint clamp. 9. Tighten X-Ring bolts in a cross pattern. 10. Tighten muffler mounting strap. 11. Remove clip-nuts from OEM muffler assembly and install on TBR slip-tube. 12. Re-install OEM heat shield. 13. Double check to make sure that all hardware is tightened.Carefully double check your work to insure that all hardware is securely fastened. If you are using bags on motorcycle make sure you have adaquate clearance between muffler and bags to keep from causing damage, this is not covered under warranty. 14. Before you run the bike, clean off all fingerprints and dirt, as any oily residue will etch the metal and become somewhat permanent when the system gets hot. Also, remove any protective plastic from the name badges on the muffler canister(s) or the muffler clamp(s). Run the bike and enjoy. It is normal for some white smoke to appear the first time you start the bike. This is packing/ manufacturing oil from inside the pipe burning off. After 50 to 100 miles, recheck all fasteners for tightness. 2009 BMW R1300S Slip-On Exhaust System Part # 005-2650406V / 005-2650407V / 005-2650408V Parts List IMPORTANT – PLEASE READ CAREFULLY Warranty two brothers racing products are intended for closed course competition purposes only, and therefore are sold “as is” without warranty. two brothers racing specifically disclaims any warranties of merchantability or fitness for a particular purpose and disclaims all responsibility for consequential and incidental damages or any other losses arising from the use of these products or parts.

Incoming search terms: