can i repair speedo drive on aprilia rs 125

You search Auto repair manual PDF can i repair speedo drive on aprilia rs 125, if there are search results will appear below. If search results do not exist, please search by others keyword.

  can i repair speedo drive on aprilia rs 125 Direct Download speed 5282 Kb/s

  can i repair speedo drive on aprilia rs 125 Full Version speed 6162 Kb/s



Filed Under (Tips and Review) by admin on 18-11-2010

Chapter 7: Mechanic Certification Requirements Page 4 7-2.2 Heavy-duty Truck Certification Categories. The Heavy-duty Truck Repair categories requiring mechanic certification to repair vehicles over 10,000 pounds G.V.W. are: a) Engine Repair, Gasoline; b) Engine Repair, Diesel; c) Drive Trains; d) Brakes and Braking Systems; e) Suspension and Steering Systems; f) Electrical Systems; g) Collision-Related Mechanical Repair. 7-2.3 Other On-road Vehicle Certification Categories. Repair categories for other on-road vehicles that require mechanic certification to perform repairs are: a) Motorcycle; b) Recreational Trailer. Automobile and Light Truck Certification Categories. The repair categories requiring mechanic certification to repair vehicles under 10,000 pounds gross vehicle weight (G.V.W.) are: a) Engine Repair; b) Engine Tune-up/Performance; c) Front End, Suspension and Steering Systems; d) Brakes and Braking Systems; e) Automatic Transmission; f) Manual Transmission, Front and Rear Drive Axles; g) Electrical Systems; h) Heating and Air Conditioning; i) Collision-Related Mechanical Repair; j) Unitized Body Structural Repair; k) Pre-1973 Vehicle Repair

Incoming search terms:

Electronic Speedo Drive for Toyota T50 5 Speed Transmission


Filed Under (Toyota Manuals) by admin on 20-09-2011

Disassembly is simple, remove the “C” clip from the drive housing , just above the drive gear. This will allow the shaft/gear assembly to be withdrawn from the housing. Remove the “O” ring from the housing. Wash all parts internally and externally to remove oil, grease and road grime This will allow the shaft/gear assembly to be withdrawn from the housing. Remove the “O” rings from the housing. Remove the three (3) philips head screws from the cover on the top of the drive housing. Carefully remove cover, be aware that the small parts in side may be stuck to the cover. Remove all internal parts, record order of assembly. Wash housing and shaft to remove oil, grease and road grime. The T50 drive shaft needs to be shortened to a similar length to the AE101. I reassembled the AE101 shaft and housing, and then measured from the top face of the AE101 housing down to the top of the AE101 drive shaft. ( Fig.4) Record this reference depth, (I got 17mm)

Incoming search terms:



Filed Under (Aprilia) by admin on 19-11-2010

DISASSEMBLING THE COMPONENTS – Never use pliers or similar tools to slacken and/or tighten nuts and bolts. Always use a suitable spanner. – Mark all connections (hoses, wiring, etc.) with their positions before disconnecting them. Identify each connection using a distinctive symbol or convention. – Mark each part clearly to avoid confusion when refitting. – Thoroughly clean and wash any components you have removed using a detergent with low flash point. – Mated parts should always be refitted together. These parts will have seated themselves against one another in service as a result of normal wear and tear and should never be mixed up with other similar parts on refitting. – Certain components are matched-pair parts and should always be replaced as a set. – Keep the motorcycle and its components well away from heat sources. ELECTRICAL CONNECTORS To disconnect the electrical connector, follow the procedures below. Failure to comply with these procedures may lead to irreparable damages to the connector and the wiring as well. If present, press the special safety hooks. ENGINE OIL DANGER Prolonged or repeated contact with engine oil may cause severe skin damage. Wash your hands thoroughly after handling engine oil. Do not release into the environment. Dispose of engine oil through the nearest waste oil reclamation firm or through the supplier. Wear latex gloves during servicing. Change engine after the first 1000 km (621 mi) and then every 6000 km (3728 mi), 2.11.2. (Recommended) oil fork , see 1.8.1. FRONT FORK OIL DANGER Modifying the suspension settings or the viscosity of the front fork oil will affect its response. Standard oil viscosity: SAE 20 W. Choose the oil viscosity to determine the type of response required (SAE 5W for a softer suspension, 20W for a stiffer suspension). The two grades can also be mixed in varying solutions to obtain the desired response. F.A. or Fork have special properties, which enable them to retain virtually the same viscosity regardless of temperature to give constant damping response

APRILIA QUASAR 50-100-125-180 maintenance Manual


Filed Under (Aprilia) by admin on 26-11-2010

CHANGING ENGINE OIL CAUTION In case of oil leakage or malfunctions, contact an Aprilia Authorised Dealer . Do not dispose of oil in the environ- ment. Dispose of engine oil – stored in a sealed container – through the nearest waste oil reclamation firm or through the supplier. Carefully read page 34 (MAINTE- NANCE) To change engien oil: ◆ Ride for a few kilometres until engine reaches the operating temperature, then stop the engine. ◆ Position a graduated container (1), under the drain plug (2). ◆ Loosen oil filler plug (4) and drain plug (2). ◆ Let oil flow out of the sump. ◆ Loosen oil filter (3) and carefully clean it. ◆ Refit the filter and tighten fully. ◆ Tighten drain plug (2) and pour recommended oil into filler plug (4), see page 58 (LUBRICANT CHART). ◆ Tighten the filler plug. CAUTION Carefully tighten filler and drain plugs and ensure oil does not leak out. Periodically check for leaks at the casing cover gasket. Do not use the vehicle with insufficient lubrication or with contaminated or unsuitable lubricants, since this would cause early wear of the moving parts and may also cause irreparable failures Fluid reservoir (1) is under rear right wheelhouse. CAUTION Position the vehicle on firm and flat ground. ◆ Make sure that the fluid contained in the reservoir exceeds the ” MIN ” mark stamped on the reservoir. MIN = minimum level. WARNING Do not use the vehicle if the braking system is leaking fluid. CAUTION Do not use the vehicle if the fluid is below the “MIN” mark. 1
27 use and maintenance Quasar 50 – 100 – 125 – 180 CAUTION Brake fluid level decreases as the brake pads wear down. Should the level be too low: ◆ Check the brake discs and pads for wear, see page 27 (CHECKING THE BRAKE PADS FOR WEAR) If the pads and/or the disc do not need re- placing: ◆ Contact an Aprilia Authorised Dealer that will top up the fluid. WARNING Check the brake for proper operation. When the brake lever has exceeding travel or if you notice a loss of braking, contact an Aprilia Authorised Dealer . The braking system may need bleed- ing. CHECKING THE BRAKE PADS FOR WEAR Carefully read page 26 (BRAKE FLUID – recommendations) , page 26 (DISC BRAKES) and page 34 (MAINTE- NANCE). Periodically check brake pad wear. The rate at which brake pads will wear depends on vehicle usage, riding style and road surface condition. Outlined below is a quick brake pad inspection procedure: ◆ Visually check between brake disc and pads, check both pads (1) looking from the bottom at the rear end. ◆ Should friction material (of even one pad only) be worn down to 1.5 mm of thickness, have both pads replaced

Aprilia Sportcity One 125 Technical Specifications


Filed Under (Aprilia) by admin on 06-11-2010

Engine Single cylinder 4-stroke. Forced air cooling. 2 valve head with overhead camshaft. Fuel Unleaded petrol. Bore and stroke 57 x 48.6 mm. Displacement 124 cc. Compression ratio 12:11 (125 cc). Maximum power 7.0 kW (9.52 HP) at 8,000 rpm. Max torque 10.04 Nm at 7,000 rpm. Fuel system Carburettor, Ø 26 mm. Ignition Electronic inductive discharge ignition with variable advance. Starting Electric. Alternator 300 W. Lubrication Wet sump. Forced circulation with mechanical pump. Gearbox Automatic variator. Clutch Automatic centrifugal dry clutch. Primary drive V belt. Final drive Gearbox. Frame Single cradle frame in high strength steel tube. Front suspension Hydraulic telescopic fork with 32 mm stanchions. Wheel travel 85 mm. Rear suspension Engine unit acting as swingarm. Single hydraulic shock absorber with adjustable spring preload. Wheel travel 84 mm. Brakes Front: 220 mm stainless steel disc with twin piston floating caliper. Rear: 140 mm drum. Wheels Light alloy. Front: 3.00 x 14″. Rear: 3.50 x 14″. Tyres Tubeless. Front: 120 / 70 x 14″. Rear: 120 / 70 x 14″. Dimensions Overall length: 1950 mm. Overall width: 740 mm. Wheelbase: 1358 mm. Seat height: 775 mm. Fuel tank Capacity 7.5 litres (including 1.5 litre reserve)

2011 APRILIA RS4 125 Engine and transmission Specifications


Filed Under (Aprilia) by admin on 24-11-2010

Engine type: 1 cylinders, 4-stroke, Single
Displacement: 125 cc (7.64 cubic inches)
Bore × stroke: 58 mm × 47 mm (oversquare – shortstroke)
Cooling system: Water cooled
Power: 16.04 HP (11.8 kW)
Throttle: Cable operated
Valve train: DOHC, variable
Valves per cylinder: 4
Fuel and ignition
Sparks per cylinder: 1
Fuel supply system: Fuel injection
Ignition type: Digital CDI
Compression: 12.5:1
Engine mounting: Transverse
Lubrication system: Wet sump
Gear box: Manual 6-speed
Clutch: Wet, multiple discs, cable operated
Final drive: Chain
Starter: Electric
Physical measures
Length: 1953 mm
Width: 740 mm
Height: 1138 mm
Wheel base: 1350 mm
Seat height: 820 mm
Curb weight: 120 kg

APRILIA MOJITO 50-125-150 workshop manual


Filed Under (Aprilia) by admin on 27-11-2010

FUEL DANGER Fuel used to drive internal combustion engines is highly inflammable and may become explosive under certain conditions. It is best to refuel and carry out maintenance in well ventilated places with the engine switched off. Do not smoke during refuelling or near fuel fumes. Avoid all contact with naked flames, sparks, or any other source that may cause ignition or explosion. Also avoid allowing the fuel to spill out of the filler cap as it could catch fire on contact with the very hot surfaces on the engine. Should fuel be spilled accidentally check that the area is completely dry before starting up the vehicle. The fuel expands when subjected to heat or the sun’s rays. The fuel tank should therefore never be filled to the brim. Close the filler cap carefully on completing refuelling. Avoid the fuel coming into contact with your skin, inhaling vapours, ingestion and siphoning from one container to another using a hose. DO NOT DISPOSE OF THE FUEL INTO THE ENVIRONMENT. KEEP AWAY FROM CHILDREN. Only use super lead-free petrol, with a minimum octane rating of 95 (N.O.R.M.) and 85 (N.O.M.M.). LUBRICANTS DANGER Adequate lubrication of the vehicle is essential to guarantee the safety of the vehicle. Failure to keep lubricants at sufficiently high levels or the use of inadequate, new and clean lubricants may cause the engine or gearbox to seize, resulting in accidents, serious injury or death. Gearbox oil may cause serious harm to your skin if handled for long periods of time and on a daily ba- sis. We recommend washing your hands carefully after having handled this oil. Do not dispose of the oil into the environment. Deliver this oil to the nearest collection company for spent oil or the supplier, or have them collect it. WARNING When putting oil into the vehicle be very careful not to spill any. Immediately clean off any spilt oil, otherwise it may damage the paintwork on the vehicle. In addition, any oil that ends up on the tyres will make them extremely slippery, creating a dangerous situation. If an oil leak should arise, do not use the vehicle. Check and identify the cause of the leak and repair the component involved. ENGINE OIL DANGER Engine oil may cause serious harm to your skin if handled for long periods of time and on a daily ba- sis. We recommend washing your hands carefully after having handled this oil. Do not dispose of the oil into the environment. Deliver this oil to the nearest collection company for spent oil or the supplier, or have them collect it. When carrying out maintenance we recommend wearing latex gloves. FORK OIL DANGER Adjusting the setting on the shock absorbers and/or the viscosity of the oil used in them may partially change the reaction of the suspension. Standard oil viscosity: SAE 20 W. The viscosity grade may be chosen in relation to the type of set-up you want on the vehicle (SAE 5W soft, 20W rigid). These two products may be used in varying percentages in order to obtain the required reaction

APRILIA SPORTCITY 125-200 Technical specifications


Filed Under (Aprilia) by admin on 07-11-2010

The engine and transmission assembly also acts as swing arm. Suspension is provided by two rear shock absorbers. Spring preload is adjustable for maximum efficiency under all load and road conditions. Rear wheel travel is 80 mm , more than enough to smooth out even the roughest surfaces. The SPORTCITY 250 i.e. is equipped with 15 inch wheels and large, high profile tubeless tyres (120/70 at the front and 130/80 at the rear). Rolling diameter is therefore equivalent to that of a 16 inch tyre but the ability to absorb shocks from rough road surfaces is far better, ensuring a superbly smooth ride. In conjunction with the excellent frame, this intelligent choice of tyres gives the SPORTCITY 250 i.e. excellent stability and the sort of intuitive feel that makes it a piece of cake to ride even for novices . The brakes are another of the strong points of the SPORTCITY 250 i.e. . The new system features triple discs for far shorter stopping distances and far greater active safety. Even inexperienced riders will have no trouble in pulling up well ahead of trouble. At 90 km/h the SPORTCITY 250 i.e. takes just 2.7 seconds to come to a full stop . The front brakes feature two 260 mm discs and floating calipers with two parallel pistons . The rear disc is a 220 mm unit with single piston caliper. Engine technology is another major plus point for the SPORTCITY 250 i.e. Its new electronic fuel injected engine is state of the art on the scooter scene . Powerful, flexible, and extremely low on emissions and consumption, this 250 cc single cylinder unit is perfect for the job in hand. Developing 22.5 HP at 8,000 rpm with 21 Nm of torque at 6,250 rpm, the engine delivers standard-setting performance . It also enables the Sportcity to function as a fun to ride sports scooter not only in town centres but on fast urban ring roads too. And the SPORTCITY 250 i.e. respects the environment wherever it goes, being one of the few scooters to conform to Euro 3 emission control standards. Finally, miserly fuel consumption and a generous 9 litre tank give the SPORTCITY 250 i.e. great autonomy . Engine Horizontal, single cylinder, 4 stroke. Forced liquid cooling with centrifugal pump. 4 valve head with overhead camshaft Fuel Unleaded petrol Bore and stroke 72 x 60 mm Displacement 244,29 cc Compression ratio 11:1 Maximum power 16.5 HP (22.5 kW) at 8,000 rpm Maximum torque 21 Nm at 6,250 rpm Fuel system Electronic fuel injection Ignition Electronic inductive discharge ignition with variable advance Starting Electric Alternator 300 W Lubrication Wet sump. Forced circulation with mechanical pump Gearbox Automatic torque converter Clutch Automatic centrifugal dry clutch Primary drive V belt Final drive Gearbox Frame Open cradle in high tensile strength steel Front suspension Hydraulic telescopic fork with 35 mm stanchions. Wheel travel 100 mm Rear suspension Engine unit acting as swinging arm. Double hydraulic shock absorber with adjustable preload. Wheel travel 80 mm Brakes Front: Twin ∅ 260 mm stainless steel discs. Twin piston floating callipers Rear: ∅ 220 mm stainless steel disc Wheels Light alloy Front: 2.75 x 15″ Rear: 3.00 x 15″ Tyres Tubeless. Front: 120 / 70 x 15″ Rear: 130 / 80 x 15″ Dimensions Maximum length: 1,985 mm Maximum width: 880 mm (at mirrors) Wheelbase: 1,360 mm Seat height; 815 mm Dry weight 148 kg Tank capacity 9 litres (reserve 1.5 litres) Colours Excalibur Grey, Shot Grey, Couture Blue, Moka Black Accessories 28 litre top box, 32 litre top box, 35 litre top box, large windshield, sports windshield, leg cover

APRILIA TUONO V4 R APRC Technical specifications


Filed Under (Aprilia) by admin on 16-11-2010

Engine type Aprilia longitudinal 65° V-4 cylinder, 4-stroke, liquid cooling system, double overhead camshafts (DOHC), four valves per cylinder Fuel Unleaded petrol Bore and stroke 78 x 52.3 mm Total engine apacity 999.6 cc Compression ratio 13:1 Maximum power at crankshaft 162 hp (119 kW) at 11,000 rpm Maximum torque at crankshaft 110 Nm at 9,000 rpm Fuel system Airbox with front dynamic air intakes. 4 Weber-Marelli 48-mm throttle bodies with 4 injectors and latest generation Ride-by-Wire engine management. Choice of three different engine maps selectable by the rider with bike in motion: T (Track), S (Sport), R (Road) Ignition Magneti Marelli digital electronic ignition system integrated in engine control system, with one spark lug per cylinder and “stick-coil” type coils Starting Electric Exhaust system 4 into 2 into 1 layout, single oxygen sensor, lateral single silencer with engine management system controlled butterfly valve and integrated trivalent catalytic converter (already meets future Euro4 regulations) Alternator Flywheel mounted 420W alternator with rare earth magnets Lubrication Wet sump lubrication system with oil radiator and two oil pumps (lubrication and cooling) Gearbox 6-speed cassette type gearbox 1st: 39/15 (2.600) 2nd: 33/16 (2.063) 3rd: 34/20 (1.700) 4th: 32/22 (1,455) 5th: 34/26 (1,308) 6th: 33/27 (1,222) Gear lever with Aprilia Quick Shift electronic system (AQS)
Clutch Multiplate wet clutch with mechanical slipper system rimary drive Straight cut gears and integrated flexible coupling, drive ratio: 73/44 (1,659) Secondary drive Chain: Drive ratio: 42/16 (2.625) Traction anagement APRC System (Aprilia Performance Ride Control), which includes Traction Control (ATC), Wheelie Control (AWC), Launch Control (ALC), all of which can be configured and deactivated independently. Frame Aluminium dual beam chassis with pressed and cast sheet elements. Sachs steering damper. Front suspension Sachs upside down front fork with Æ 43 mm stanchions. Low profile forged aluminium calliper mountings for radial callipers. Completely adjustable spring preload and hydraulic compression and rebound damping. Wheel travel: 120 mm

Ural Motorcycle Repair Manual


Filed Under (Ural) by admin on 11-11-2010

FLUID CAPACITIES TOURIST & -10 Models Sportsman Solo Gasoline tank 19 L / 5 Gal 19L / 5 Gal 18.5 L / 4.9 Gal Reserve 2L / 0.5 gal 2L / 0.5 gal 2L- / 0.5 Gal Engine crankcase 2 L / 2 qt. + 3.6 oz. 2.0L / 2.11 qt 2 L / 2 qt. + 3.6 oz. Gearbox 0.9L / 1 qt 0.9L / 1 qt 0.9L / 1 qt Final drive 110 ml / 3.85 oz. 150 ml / 5.25 oz. 110 ml / 3.85 oz. Telescopic Forks (-10 & solo models) N/A on Tourist N/A on Sportsman 135 ml / 4.56 oz. Shock Absorbers 105 ml / 3.55 105 ml / 3.55 oz 105 ml / 3.55 oz
RUNNING GEAR TOURIST / SPORTSMAN SOLO Frame Tubular welded Rear wheel suspension Swing arm with hydraulic spring shock absorbers Sidecar: same as -40 Solo: Lower spring rate Front fork Leading link Telescopic spring Sidecar Cushioned body (on rubber cushions) and wheel on long-lever suspension with hydraulic spring shock absorber N/A Brakes Shoe-type with mechanical drive on front, rear and sidecar wheels, front wheel has dual cams. Tires 4″ x 19″ Front & Side: 22 psi cold Rear: 36 psi cold 3.5″ x 18″ Solo: Front 25 psi cold Rear: 32 psi cold -10′s: Front & side: 25 psi cold Rear: 36 psi cold CLEARANCES mm in Valves with engine cold 0.05 0.002 Between spark plug electrodes 0.50 – 0.65 0.020 – 0.026 Between brake shoes and drum 0.3 – 0.70 0.012 – 0.028 Backlash between tooth faces of bevel gears in final drive 0.1 – 0.3 0.004 Between rotor and ignition pickup 0.3 – 0.4 .012 – .016 FREE TRAVEL / ADJUSTMENTS mm in Hand brake control lever 5 – 8 0.2 – 0.3 Clutch control lever 5 – 8 0.2 – 0.3 Foot brake drive pedal ¼ of full stroke of pedal, 25 – 30 1.0 – 1.2 Toe-in throughout motorcycle center distance (exception: Sportsman 0 ° toe-in) 10 N/A Angle of motorcycle inclination to vertical plane (camber angle of rear wheel) 1° away from sidecar N/A Headlight installation (with motorcycle laden) horizontal (high beam) TORQUE SPECIFICATIONS Metric (in repair manual) US Equivalent Location on Bike 29 to 33 Nm 22 ft/lb. to 30 ft/lb. cylinder heads 22 to 25 kgf-m 175 ft/lb. to 185 ft/lb. fly wheel tightening screws 3.8 to 4.2 kgf-m 30 ft/lb. to 40 ft/lb. cylinder 2.1 to 3.0 kgf-m top 14 ft/lb. to 22 ft/lb. shock absorber 3.6 to 5.0 kgf-m bottom 28 ft/lb. to 36 ft/lb. shock absorber 3.0 to 3.4 kgf-m 22 ft/lb. to 26 ft/lb. bearing nut 3.0 to 3-4 kgf-m 22 ft/lb. to 26 ft/lb. final drive to swing arm bolts 1.6 to 1.8 kgf-m 12 ft/lb. to 14 ft/lb. oil pump bolt .8 to 1.0 kgf-m 5 ft/lb. to 8 ft/lb. engine sump 1.4 to 1.8 kgf-m 10 ft/lb. to 14 ft/lb. final drive case nuts 7 to 9 kgf-m 50 ft/lb. to 66 ft/lb. nut fastening the pinion bearing 2.2 to 2.8 kgf-m 16 ft/lb. to 20 ft/lb. reverse gear brake lever 1.8 to 2.0 kgf-m 14 ft/lb. to 16 ft/lb. generator gear nut 14.0 to 16.8 kgf-m 100 ft/lb to 120 ft/lb steering stem nut CONVERSIONS To convert from mm to in, divide by 25.4 (there are 25.4 mm per inch). To convert from liters to gallons, divide by 3.785 (there are 3.78 liters per gallon). To convert from liters to quarts, multiply by 1.056 (there are 1.056 quarts per liter). To convert from liters to pints, multiply by 2.112 (there are 2.112 pints per liter). To convert from km to miles, multiply by .62 (there is .62 mile per km). To convert from km/hr to mph, multiply by .62. To convert from Newton-meter (Nm) to inch-pound, multiply by 8.86. To convert from cm 3 (cc) to pints, divide by 473 (there are 473 cc per pint). To convert Celsius to Fahrenheit, F° = C° x 1.8 = 32°. To convert Fahrenheit to Celsius,C ° = (F° – 32° ) divided by 1.8

Incoming search terms: