dna springer review

You search Auto repair manual PDF dna springer review, if there are search results will appear below. If search results do not exist, please search by others keyword.





HARLEY DAVIDSON SOFTAIL SPRINGER Dual Slip-On Exhaust System Installation Manual

0

Filed Under (Harley Davidson) by admin on 22-12-2010

download
REMOVING THE STOCK MUFFLERS 1. Loosen the bolt on the pinch clamp at the front end of each muffler. 2. Remove the two bolts that mount the muffler to the mounting bar. Repeat this step on the opposite muffler. 3. Remove the stock mufflers and set them aside. Note: It may be necessary to use a penetrating lubricant to loosen the mufflers from the head pipes. INSTALLING YOUR NEW VANCE & HINES SLIP-ON EXHAUST SYSTEM 1. Remove the two 5/16″ flanged head bolts from the bracket that is welded to the backside of each muffler. Attach one of the mounting brackets (supplied) to each muffler, using two of the 5/16″ flanged head bolts (removed earlier), leaving them loose at this time. When the bracket is mounted correctly on the muffler, the single hole end should point down when the muffler is mounted to the bike. 2. Be sure there is a muffler clamp (supplied) over the front (notched end) of each muffler. 3. Slip the muffler onto the stock head pipe, mount the muffler to the rear most hole of the stock mounting bar, using one of the stock bolts and tighten. Repeat this step on the opposite muffler. Note: When installed correctly, the Vance & Hines logo on the muffler should face outwards. 4. Tighten the two muffler clamps. 5. Tighten the two 5/16″ flange bolts on each muffler bracket. 6. Wipe any finger prints or oil off any chrome parts of the exhaust system before starting the motorcycle. 7. Be sure to tighten all hardware before starting your motorcycle. RE-JETTING INSTRUCTIONS Re-jetting the carburetor will result in realizing the “full” potential of this performance exhaust system. Vance & Hines offers jet kits for most applications

HARLEY-DAVIDSON SPRINGER FORKS MOUNTING INSTRUCTIONS

0

Filed Under (Harley Davidson) by admin on 06-04-2012

download
1. The shock mounts with the body up —shaft pointing down. The nitrogen fill valve can be positioned toward the rear of the motorcycle. 2. Make sure that both halves of the upper and lower bushings are in place. NOTE: Do not try to install the shock with only half of the bushings, as this will lead to poor performance and premature seal leakage. The amount of “float” in the bushing set is necessary to ensure smooth operation of the damper assembly. 3. It is easiest to install the shock when the forks are fully extended, however the shock can be installed with the bike on the kick stand. 4. Insert the body eye into the mounting channel on the fork crown. Rotate the shock down into the lower channel. NOTE: A thread locking compound such as Red Loctite 262 or other similar product should be used on the shock fasteners. 5. Install the upper mounting stud and nuts, finger tight. 6. Push the shaft up far enough to insert the lower mounting stud and nuts. This will take a little effort because of the gas pressure in the shock. 7. Torque the upper and lower shock mount nuts to 22 ft. lb.

2011 Ninja ZX-10R Review And SPECIFICATIONS

0

Filed Under (Kawasaki) by admin on 13-12-2010

download
1. Big Piston Fork (BPF) and Öhlins Steering Damper Throwing out the anchors at track speed demands a fork that remains composed under pressure. The fully adjustable new Big Piston Fork (BPF) does just that by significantly reducing damping pressure while maintaining consistent damping force. The standard Öhlins Steering Damper is likewise adjustable to help you dial in the steering damping level you need. 2. Horizontal Back-Link Rear Suspension New rear suspension positions the shock and its linkage above the swingarm, leaving room beneath the bike for a larger exhaust pre-chamber. The move helps centralize mass for better transitional cornering response, while also improving overall suspension action and road holding. The piggyback-reservoir shock is fully adjustable, including both low- and high-speed compression-damping circuits. 3. Adjustable Footpegs Adapting the ZX-10R for a day at the track or a long street ride is easy, thanks to its new adjustable footpegs. Raise the footpegs to improve your cornering clearance on the track, or lower them for a more relaxed riding position on the street or highway. The total range of adjustment is 15mm. 1. 2. 3. SPECIFICATIONS Engine Four-stroke, liquid-cooled, DOHC, four valves per cylinder, inline-four Displacement 998cc Bore X Stroke 76.0 x 55.0 mm Compression Ratio 13.0:1 Fuel System DFI® with four 47mm Keihin throttle bodies with oval sub-throttles, two injectors per cylinder Ignition TCBI with digital advance and Sport-Kawasaki Traction Control (S-KTRC) Transmission Six-speed Final Drive Chain Rake/Trail 25.0deg / 4.33 in. Front Tire Size 120/70 ZR17 Rear Tire Size 190/55 ZR17 Wheelbase 56.1 in. Front Suspension / Wheel Travel 43mm inverted Big Piston Fork (BPF) with DLC coating, adjustable rebound and compression damping, spring preload adjustability / 4.7 in. Rear Suspension / Wheel Travel Horizontal Back-link with gas-charged shock and top-out spring, stepless, dual-range (low-/high- speed) compression damping, stepless rebound damping, fully adjustable spring preload / 4.9 in. Front Brakes Kawasaki Intelligent anti-lock Braking (KIBS), dual semi-floating 310mm petal discs with dual four-piston radial-mount calipers Rear Brakes KIBS-controlled, single 220mm petal disc with aluminum single-piston caliper Fuel Capacity 4.5 gal. Seat Height 32.0 in. Curb Weight TBD Overall Length 81.7 in. Overall Width 28.2 in. Overall Height 43.9 in. Color Choices Lime Green / Ebony, Ebony / Flat Ebony Warranty 12 Months Good Times™ Protection Plan 12, 24, 36, 48 months PERFORMANCE PARTS Kawasaki offers a full line of performance parts for your new motorcycle. COVER Constructed of water-resistant polyester and a unique shielded vent system that allows built-up moisture to vent. Reinforced grommet at the bottom hem allows the cover to be locked to the bike for added security. Heat resistant panels in the exhaust area. Oversized fit allows for easy installation and removal.

1998 Honda Shadow Aero Specifications And Review

0

Filed Under (Honda) by admin on 24-11-2010

download
can fix it – let us help. The color combo that would have been featured here, had we not got rained on. As light as the morning precipitation was, a rainsuit seemed silly, and surely jeans and a leather jacket would be enough. However, at the crest of the peninsula, El Nino let his wrath be felt. A full-on downpour of Florida- like proportions dropped from the sky, without the benefit of gulf-stream warmth. Suddenly, wearing geeky-looking Gore-Tex seemed like a very good idea. Riding through six inch deep floodwaters at about 15 mph, the Aero kept a very even keel. The floorboards (first ever on a Honda) kept the feet drier than they would have been otherwise. After a brief stop at a military museum, we headed back to Honda’s HQ for a van ride to lunch at Hollywood’s House of Blues. Detail 101: Witness the huge chrome headlight/speedo assembly, with matching idiot lights set into the triple clamp. We couldn’t form much of a riding impression from our rain-soaked 30 mile jaunt, but we liked what we found. If you’re a big fan of the ACE 750, you’ll be a big fan of the Aero. Although the styling is not ground-breaking, it isn’t a carbon copy of you-know-who (hint: They’re based out of Milwaukee). The detail on the Aero is beautiful, with tasteful chrome accents and well-finished pieces. We hope to get the big 1100 back for a full test against Suzuki’s new Intruder 1500LC, Harley’s new Road King Classic, and all the other cruiser big boys some time this spring, after El Nino goes away … Manufacturer: Honda Model: 1998 Shadow Aero Price (two-tone): $9,995.00 Engine: liquid-cooled 45 degree V-twin, single crank pin Bore and Stroke: 87.5 x 91.4mm Displacement: 1099cc Carburetion: Two 36mm CV Transmission: 5 speed Wheelbase: 66.1 in Seat Height: 28.5 in Fuel Capacity: 4.2 gal with .8 gal reserve Claimed Dry Weight: 623 lbs

Incoming search terms:

1997 Honda CBR 1000 F specifications review

0

Filed Under (Honda) by admin on 20-12-2011

download
Front brakes: Dual disc Rear brakes: Single disc Speed and acceleration Top speed: 255.0 km/h (158.4 mph) Power/weight ratio: 0.5745 HP/kg Other specifications Further information Parts and accessories Check out parts and accessories from our partners. Ask questions Join the 97 Honda CBR 1000 F discussion group Insurance, loans, tests Search the web for dealers, loan and insurance costs, tests, customizing, etc. Related bikes List related bikes for comparison of specs Buying a bike starts at Bikez Get a list of related motorbikes before you buy this Honda. Inspect technical data. Look at photos. Read the riders’ comments at the bike’s discussion group. And check out the bike’s reliability, repair costs, etc. Show any 1997 Honda CBR 1000 F for sale on our Bikez.biz Motorcycle Classifieds. You can also sign up for e-mail notification when such bikes are advertised in the future. And advertise your old MC for sale. Our efficient ads are free. You are also welcome to read and submit motorcycle reviews. Rating sample for this Honda bike Value for money for the 1997 Honda CBR 1000 F: (67.1 out of 100) Click here for complete rating. You can also compare bikes.

Incoming search terms:

Stinger Folding Motorcycle Trailer Review And Specifications

0

Filed Under (Tips and Review) by admin on 29-01-2011

download
trailer with which to haul your machine(s). The steady stream of four-wheelers trailering two- wheelers to Daytona Bike Week proves that, for a considerable number of us, Mother Nature’s elements are sometimes best enjoyed upon reaching our destination, rather than experienced while traveling toward it. Travel aside, motorcycle trailers are handy, even indispensable, for getting asickly motorcycle to the shop, or to avoid committing the better part of a day waiting while the dealer installs new tires and brake pads. Finally, we find atrailer is preferable to a pickup truck for motorcycle transport, especially when singlehandedly loading/unloading. The problem for many of us is where do we find the space to park this little- used device? No matter if it’s a flatbe Rod Haskins, owner of metal bender Maintenance &Fab in Richmond, California, isn’t a rider himself, but his research indicated a market existed for a sturdily built, full-sized motorcycle trailer that folded compactly when not in use. Learning of a dormant but clever design developed by an agricultural trailer company, Haskins struck a deal, made several improvements and the Stinger Trailer was born. Werecently spent some time with a Stinger and found it to be a clever product. The Stinger arrived folded and secured to a wooden pallet. Assembly was simple, and within 20 minutes we had the 180- pound trailer ready to tow. The trailer is not towable in the folded position—that’s for storage only. Aone-car garage, home to our full-sized Chevrolet, couldn’tnormally house a motorcycle trailer, too. But the folded Stinger squeezed in nicely

Incoming search terms:

TOYOTA TACOMA 2005 SUPERCHARGER FIT KIT

0

Filed Under (Toyota Manuals) by admin on 27-09-2011

download
are must be taken when installing this accessory to ensure damage does not occur to the vehicle. The installation of this accessory should follow approved guidelines to ensure a quality installation. These guidelines can be found in the “Accessory Installation Practices” document. This document covers such items as:- • Vehicle Protection (use of covers and blankets, cleaning chemicals, etc.). • Safety (eye protection, rechecking torque procedure, etc.). • Vehicle Disassembly/Reassembly (panel removal, part storage, etc.). • Electrical Component Disassembly/Reassembly (battery disconnection, connector removal, etc.). • The TIS Repair Manual can be referenced for additional details. Please see your Toyota dealer for a copy of this document. 1. Installation Review and Vehicle Preparation. (a) Review the entire instruction instructions provided before beginning the installation (b) Review the parts list/kit contents to ensure that all parts are present before beginning the installation. If any items are missing contact Technical Support at (800) 688-5912 before proceeding. (c) Remove any low-octane fuel from the vehicle. Ensure that ONLY 91 octane or higher unleaded gasoline is used. (d) Place the vehicle onto vehicle hoist. (e) Protect the vehicle with protection blankets over the fenders and front of the vehicle. (f) Disconnect and remove the battery. (g) When draining the cooling system into a clean container in Step 7

Ktm 690 SM/ SMC/ SMR/ Duke Removal and Installation weld slag

0

Filed Under (KTM) by admin on 04-03-2012

download
1. Each bike varies with regard to welds and gussets. Review the photos first to get the idea of what needs to be done. 2. These photos may not be your exact model but depict the concept of what must be done. 3. Block the front tire securely before removing the top triple clamp so the tire cannot move at all. See photos. 4. Support the rear tire also, just enough to keep tension on the front tire so the forks stay tight. 5. Warning: Once the triple clamp is loose, the forks can roll away from the bike AND it happens very quickly . 6. The main triple clamp nut adjusts the tension on the steering head bearings. Make note of its tension before removing and do not over tighten the nut. It should be seated just enough to take the play out of the bearing.. 7. The top of the gauge/light cluster is mounted to the top triple clamp. You have to take out 4 self tapping Phillips head screws to remove the gauge pod. There is one connector on the back side of that and then it comes off. Then there are two bolts that need to come out with an 8mm wrench to free the top triple clamp. 8. Loosen the triple clamp pinch bolt under the main nut and forks pinch bolts and remove the top triple clamp, taking note of how tight the main nut is, so you can re-tighten it to the exact amount. Remove the tin bearing shroud (cover) and rubber seal making note of how the seal goes on, (lips face downward). 9. Grease your bearings while you have them exposed. (Keep the grease off the area where our frame bracket mounts!). 10. The goal is to allow the frame bracket to clamp cleanly and squarely around the upper half of the head tube. 11. Review your individual bike’s welding characteristics at the head tube. You’ll notice on the head tube there is a “groove” machined 360 degrees around the head tube. Everything in or above this groove must be clean of welds or slag. If this groove is visible all the way around and no welding slag has extended upward into or past this groove, then you’re installation should be easy. Any welds extending into or above this groove must be filed away, but without changing the clamping area diameter. DO NOT file away the paint on the clamping area if possible. Spend a little more time filing carefully and your bracket will stay tight. 12. Each bike seems to have not only different welds, but slightly different gussets. Evaluate your individual bike to determine the best fit. The bracket must clamp squarely and cleanly to the area just above that groove and yet SIT FLUSH all the way around the diameter of the head tube as per the photo in the lower right corner. Do not allow the bracket to protrude above the seal seating surface. Use a flashlight to see up under the bracket where it’s hitting if it’s not Flush. This bracket has clearance cut into it to clear the backbone of the frame

HARLEY DAVIDSON FRONT BRAKE DISC LOCK INSTALLATION MANUAL

0

Filed Under (Harley Davidson) by admin on 20-03-2011

download
INSTALLATION Do not operate vehicle with brake disc lock in place. Operation with lock on disc will restrict movement of the wheel, which could result in death or serious injury. (00457b) NOTE Insert key all the way to the bottom of the cylinder. Turn key clockwise 180 degrees to the open position. DO NOT FORCE KEY! Key should turn freely. If key does not freely rotate, try turning key slightly left and right while inserting to align disks inside cylinder. Failure to insert key all the way to the bottom of cylinder could cause key to jam. For Models with Hydraulic Fork Front Ends 1. See Figure 1. Insert reminder cord (3) into slot on disc lock (1). 2 1 3 is 01599 1. Lock 2. Caliper 3. Reminder cord Figure 1. Installing Disc Lock 2. Slide lock (1) over front brake disc as close to rearward edge of brake caliper (2) as possible. Push button completely down to lock. 3. Roll motorcycle forward slowly until lock gently contacts caliper. 4. See Figure 3. After installing disc lock, place loop end (1) of reminder cord (2) over handlebar grip. For Models with Springer Front Ends 1. See Figure 2. Insert reminder cord (5) into slot on disc lock

Incoming search terms:

2008 Triumph Rocket III specifications and pictures

0

Filed Under (Triumph) by admin on 06-11-2010

download
Triumph Rocket III 2008 Picture credits – Triumph . Click to submit more pictures. 2008 Triumph Rocket III More pictures… Discuss this bike Rate this motorbike This bike’s rating Write a review Sell this motorcycle Such bikes for sale Tip a friend List related bikes General information Model: Triumph Rocket III Year: 2008 Category: Custom / cruiser Rating: 68.5 out of 100. Show full rating and compare with other bikes Engine and transmission Displacement: 2294.00 ccm (139.98 cubic inches) Engine type: In-line three Stroke: 4 Power: 140.00 HP (102.2 kW)) @ 6000 RPM Torque: 147.00 Nm (15.0 kgf-m or 108.4 ft.lbs) @ 2500 RPM Compression: 8.7:1 Bore x stroke: 101.6 x 94.3 mm (4.0 x 3.7 inches) Fuel system: Injection. Multipoint sequential electronic fuel injection Fuel control: DOHC Ignition: Digital – inductive type – via electronic engine management system Cooling system: Liquid Gearbox: 5-speed Transmission type final drive: Shaft drive (cardan) Clutch: Wet. multi-plate Physical measures Dry weight: 319.3 kg (704.0 pounds) Seat height: 739 mm (29.1 inches) If adjustable, lowest setting. Overall height: 1,166 mm (45.9 inches) Overall length: 2,499 mm (98.4 inches) Overall width: 970 mm (38.2 inches) Wheelbase: 1,694 mm (66.7 inches) Chassis and dimensions Frame type: Tubular steel. twin spine Rake (fork angle): 32.0° Front suspension: 43mm upside down forks Rear suspension: Chromed spring twin shocks with adjustable preload Front tyre dimensions: 150/80-R17 Rear tyre dimensions: 240/50-R16 Front brakes: Double disc Front brakes diameter: 320 mm (12.6 inches) Rear brakes: Single disc Rear brakes diameter: 316 mm (12.4 inches) Speed and acceleration Fuel capacity: 23.84 litres (6.30 gallons) Color options: Claret. Phantom Black Further information Parts and accessories Check out parts and accessories from our partners. Ask questions Join the 08 Triumph Rocket III discussion group, the new Triumph forum at Bikez.name or the new Custom / cruiser forum at Bikez.name. Insurance, loans, testsSearch the web for dealers, loan and insurance costs, tests, customizing, etc. Related bikes List related bikes for comparison of specs

Incoming search terms: