ducati monster 696 black wrench indicator

You search Auto repair manual PDF ducati monster 696 black wrench indicator, if there are search results will appear below. If search results do not exist, please search by others keyword.



  ducati monster 696 black wrench indicator Direct Download speed 5282 Kb/s

  ducati monster 696 black wrench indicator Full Version speed 6162 Kb/s



DUCATI MONSTER 696 Owner's manual and maintenance manual

0

Filed Under (Ducati) by admin on 14-12-2010

download
instrument panel (fig. 4) 1) LCD (see page13). 2) Tachometer (rpm). Indicates engine revs per minute. 3) Neutral (N) indicator ( green ). Illuminates when the gearbox is in neutral. 4) Fuel warning light ( yellow ). Illuminates when there are approximately 3litres of fuel left in the tank. 5) Turn signal indicator light ( green ). Illuminates and flashes when the turn signal is in operation. 6) Engine oil pressure warning light ( red ). Illuminates when engine oil pressure is too low. This light should illuminate when the ignition is switched to ON and should go out a few seconds after the engine starts. Important If this light (6) stays on, stop the engine to avoid serious damage. 7) High beam warning light ( blue ). Illuminates when the high beam headlight is on. 8) “EOBD engine diagnostics light” ( amber ). The engine ECU iluminates this light steadily to indicate the presence of errors leading to engine lock. 9) OVER REV indicator lights . Illuminates steadily at 800 rpm before intervention of the revlimiter. Starts flashing when the rev limiter is reached. 5 8 2 4 9 3 1 6 7 fig. 4 12 E 10) 2-position switch A and B . Switch used for displaying and setting instrument panel parameters. It has two positions, A “▲” and B “▼”. 11) High beam headlight flasher switch (fig. 5). The high beam headlight flasher switch is also used for the LAP and USB data aquisition functions. 11 A 10 B fig. 5 13 E LCD – Main functions Warning Any adjustments to the instrument panel must only be carried out when the motorcycle is stationary. Never operate the instrument panel controls while riding the motorcycle. 1) Speedometer . Indicates road speed. 2) Odometer . Shows total distance travelled. 3) Trip meter . Indicates the distance travelled since last reset. 4) Fuel reserve trip counter . Shows distance travelled on reserve fuel. 5) Clock . 6) Air temperature indicator . 7) Lap time . 8) Rev counter (RPM) . 9) Lap time . 8 11 13 12 14 10 4 5 9 6 2 3 1 7 fig. 6 14 E 10) Service indicator (fig. 6). The indicator illuminates to signal when a service is due. The service indiactor will remain on the display until the system is reset by the Ducati Service Centre who carry outthe service. 11) LAP function (fig. 6). Indicates that the LAP has been activated. 12) DDA function (fig. 6). Indicates that the Ducati Data Analyzer (DDA) has been activated. Important The instrument panel incorporates diagnostic functions for the electronic injection/ignition system. The relative menus are for the use of trained personnel only. If you accidentally access this function, turn the key to OFF and have the motorcycle checked at an authorised Ducati Service Centre. 13) Oil temperature indicator (fig. 6). Important Stop riding if the temperature reaches the maximum value, otherwise the engine might be damaged. 14) Ducati Traction Control (DTC) (fig. 6). Indicates activation of the DTC control unit (if present). 15 E LCD – How to set/display parameters At key-on (key turned from OFF to ON ) the instrument panelactivates all the digits of the LCD for 1second and switches on the indicator lights in sequence.

Incoming search terms:

DUCATI MONSTER S4R And DUCATI MONSTER S2R EXHAUST SYSTEM Installation instructions

0

Filed Under (Ducati) by admin on 26-10-2010

download
REMOVAL OF STOCK EXHAUST SYSTEM: 1. Put the motorcycle on a side stand, we recommend a racing stand. Make sure, that surface is solid and flat. 2. Remove stock heat shields (Figure 1, 2) 3. Unscrew the bolts from the metal clamps at the muffler – collector joints (Figure 3, 4). T-handle 10mm wrench T-handle 12mm wrench T-handle 13mm wrench T-handle 3mm three hexagon key wrench T-handle 5mm three hexagon key wrench Combination 13mm wrench Spring puller Figure 1 Figure 2 Figure 3 Figure 4
NAV – 124 3 Figure 10 Figure 7 Figure 8 4. Unscrew the bolt from the muffler chassis hanging bracket and remove both mufflers with link pipes (Figure 5, 6). INSTALLATION OF THE AKRAPOVIC SLIP-ON EXHAUST SYSTEM: 1. Slide the link pipes onto the stock collector (Figure 7) hand tighten the metal clamps at the Akrapovic link pipe – stock collector joints; coat the interior side of the metal clamps and the clamp bolts with Akrapovic anti-seizing copper paste (black tube) (Figure 8). 2. Install Akrapovic carbon-fiber chassis hanging bracket (Figure 9, 10). 22Nm 16ftlb Figure 5 Figure 6 Figure 9 NAV – 124 4 Figure 15 3. Position the muffler correctly and slide it onto the outlet side of the link pipes and attach the springs; WARNING! make sure, that springs pull the muffler all the way onto the link pipes – use rubber mallet if necessary to tap the connections into place! (Figure 11, 12). 4. Correctly position the carbon-fiber clamp and slide it onto the muffler – bear in mind the left offset of the carbon-fiber clamp viewed from the rear. WARNING: open the clamp slightly wider than the diameter of the outer sleeve of the muffler – do not scrape it along the muffler outer sleeve! (Figure 13). Tighten the carbon-fiber clamp onto the Akrapovic carbon- fiber chassis hanging bracket (Figure 14, 15). Make sure the link pipes or muffler are not touching the frame or any other part of the motorcycle.

Incoming search terms:

KYMCO MXU 500 SPECIFICATION AND OWNER'S MANUAL

0

Filed Under (Kymco) by admin on 12-11-2010

download
OFF ON (1) CONTROL FUNCTIONS 17 (1) Ignition switch (2) Key IGNITION SWITCH ON: Functions oft he respective switch positions areas follows: The key cannot be removed. Theenginecanbe started. OFF: “”: All electrical circuits are switched off except hazard light. The key can be removed in this position. All electrical circuits are switched on. The ignitions witch is ON while the position light and taillightwill light. All electrical circuits are switched on. Theenginecanbe started. The key cannot be removed. 18 INSTRUMENTS AND INDICATOR (1) Multi-function display (2) (3) (5) (6) Low-range indicator light”L” (7) High-range indicator light”H” (8) Neutral indicator light”N” (9) Reverse indicator light”N: (10) Park indicator light”P” (11) (12) Right turn signal indicator High beam indicator (4) Coolant temperature warning indicator Set button Mode button Left turn signal indicator (11) (2) (3) (4) (5) (8) (1) Multi-function display The display includes the following functions: Speedometer Odometer/Tripmeter Digital clock 2WD/4WDindicator Fuel gauge (2) Right turn signal indicator Flashes when the right turn signal operates. (3) High beam indicator The ignition switch is at the”"position, the high beam indicator will light when the headlight switch to select High beam () . Both left and right turn signal indicator will flash at the meantime when the hazard switch is operated and turn signal switch is turned off. NOTE: (12) (1) (7) (6) (9) (10) TRIP ODO mile kmPM 2WD 4WD SET MODE PRNHL
19 (4) Coolant temperature warning indicator When the coolant temperature reachesa specified level, this indicator comes onto warn that the coolant temperature is too hot. If the indicator comes on during operation, stopt he engine as soon as it is safe to do so and allow the engine to cooldown for about 10 minutes. (5) Set button This button is used to select ODO, TRIP A andT RIPB. This button is also used to adjust the time and reset the tripmeter. (6) Low-range indicator light”L” This indicator light comes on when the drive select lever is in the”L”position. (7) High-range indicator light”H” This indicator light comes on when the drive select lever is in the”H”position. (8) Neutral indicator light”N” This indicator light comes on when the drive select lever is in the”N”position

Incoming search terms:

DUCATI MONSTER 1100 / 1100S Owner's manual and maintenance manual

0

Filed Under (Ducati) by admin on 14-12-2010

download
1) Speedometer . Indicates road speed. 2) Odometer . Shows total distance travelled. 3) Trip meter . Indicates the distance travelled since last reset. 4) Fuel reserve trip counter . Shows distance travelled on reserve fuel. 5) Clock . ) Lap time . 7) Rev counter (RPM) . 8) Lap time . 7 10 12 11 13 9 4 5 8 2 3 1 6 fig. 6 14 E 9) Service indicator (fig. 6). The indicator illuminates to signal when a service is due. The service indicator will remain on the display until the system is reset by the Ducati Service Centre whocarry outthe service. 10) LAP function (fig. 6). Indicates that the LAP has been activated. 11) DDA function (fig. 6). Indicates that the Ducati Data Analyzer (DDA) has been activated. Important The instrument panel incorporates diagnostic functions for the electronic injection/ignition system. The related menus are for use by trained personnel only. If you accidentally access this function, turn the key to OFF and have the motorcycle checked at an authorized Ducati Service Centre. 12) Oil temperature indicator (fig. 6). Important Stop riding if the temperature reaches the maximum value, otherwise the engine might be damaged. 13) Ducati Traction Control (DTC) (fig. 6). Indicates activation of the DTC control unit (if present). 15 E LCD – How to set/display parameters At key-on (key turned from OFF to ON ) the instrument panelactivates all the digits of the LCD for 1second and switches on the indicator lights in sequence. OFF CHECK 1 fig. 7 16 E It then reverts to “normal” mode and, in place of the motorcycle speed, shows the model and, for 2 seconds, alsothe version (EU, UK, USA, CND, FRA, JAP). The model is scrolled on the display onceonly. CHECK 2 RUN fig. 8 17 E At Key-On, the instrument panel always shows the following information (de-activating any previously activated functions): Odometer Speed Engine rpm bargraph Engine oil temperature bargraph At this point, with button (1, fig. 9) in position B “▼” it is possible to switch from the odometer display function to thefollowing functions: TRIP TRIP FUEL (only if active) Clock before returning to TOT (odometer function). If, however, you press switch (1, fig. 9) in position A “▲”, thesystem enters MENU mode and displays the following functions in sequence: Error (only if active) BATT RPM LIGHT SET LAP (OFF or ON) LAP MEM DDA (OFF or ON) Erase DDA TIME Set CODE (only if active)

SUZUKI GSX 1300R OWNER'S MANUAL

0

Filed Under (Suzuki) by admin on 01-12-2010

download
CLOCK/FUEL INJECTION SYSTEM INDICATOR (D The indicator displays clock under normal condition. The indicator switches from the clock to the fuel injection system indicator if the fuel injection system has any failure. Clock mode The clock indicates 12-hour mode. Follow the procedure below to adjust the clock. 1. Push the button® until the display blinks. 2. Pushing the button will advance one minute at a time. Repeat pushing the button until the display reaches desired time. 3. Keeping the button pushed in will advance ten minutes at a time. Keep the button pushed until the display reaches desired time. Fine- tune the time by pushing the button repeatedly. 4. Wait 5 seconds and push the button to resume to time display. Fuel injection system indicator F I The fuel injection system indicator indicates “Fl” or “CHEC” if the fuel injection system has any trouble. The Fl indicator light (D will also come on if the fuel injection system has failure. No 1 2 3 Fuel injection system indicator Fl Fl/Clock alternately CHEC Fl indicator light Blinks Lights – Engine condition Engine does not start. Engine can start. Engine does not start. 14 If the fuel injection system indicator displays “Fl” and Fl indicator light blinks, the engine will not start due to a serious fuel injection system failure. If the system has serious failure while riding, the engine may stop. When the fuel injection system indicator displays “Fl” and clock alternately and Fl indicator light comes on, the engine can be started and a will keep running with limited engine performance. This shows that the fuel injection system has minor failure. Bring your motorcycle to an anthorized Suzuki dealer or qualified mechanic to inspect the motorcycle. Continuous operation in this condition may seriously damage the motorcycle. 3. When the fuel injection system indicator indicates “CHEC,” the engine will not start. Make sure that the engine stop switch is turned on and the transmission is in neutral position with the side stand fully up. If the indicator still indicates “CHEC,” inspect the ignition fuse next. SPEEDOMETER ® The speedometer indicates the road speed in kilometers per hour and miles per hour. RIGHT TURN SIGNAL INDICATOR LIGHT © When the right turn signals are operated, the indicator light will flash at the same time. NOTE: If the turn signal light is not operating properly due to bulb filament or circuit failure, the indicator light flickers more quickly to notify the rider of the existence of trouble

2007 Harley-Davidson Softail Family Specifications

0

Filed Under (Harley Davidson) by admin on 02-11-2010

download
frame Mild steel tubular frame; rectangular section backbone; stamped, cast and forged junctions; forged fender supports; MIG welded Mild steel tubular frame; rectangular section backbone; stamped, cast and forged junctions; forged fender supports; MIG welded Mild steel tubular frame; rectangular section backbone; stamped, cast and forged junctions; forged fender supports; MIG welded Swingarm Mild steel, round tube sections, forged junctions, MIG welded Mild steel, round tube sections, forged junctions, MIG welded Mild steel, round tube sections, forged junctions, MIG welded Front Fork 41.3 mm telescopic, “beer can” covers 41.3 mm telescopic, “beer can” covers 41.3 mm telescopic, “beer can” covers Rear Shocks Hidden, horizontal-mounted, coil-over Hidden, horizontal-mounted, coil-over Hidden, horizontal-mounted, coil-over Caliper Type 4-piston front and rear 4-piston front and rear 4-piston front and rear Rotor Type: (diameter x width) Patented, uniform expansion rotors Patented, uniform expansion rotors Patented, uniform expansion rotors Front 292 mm x 5.08 mm 292 mm x 5.08 mm 292 mm x 5.08 mm Rear 292 mm x 5.84 mm 292 mm x 5.84 mm 292 mm x 5.84 mm Front (mm) 130 130 130 Rear (mm) 109 109 109 Engine Torque (EU standard EC95/1)5 86 ft. lb / 117 Nm @ 3200 rpm 89 ft. lb / 120 Nm @ 3300 rpm 89 ft. lb / 120 Nm @ 3300 rpm Right 29° 30° 28° Left 26° 28° 26° Battery Sealed, maintenance-free, 12V, 19-amp/hour, 270 cca (per Battery Council International Rating) Sealed, maintenance-free, 12V, 19-amp/hour, 270 cca (per Battery Council International Rating) Sealed, maintenance-free, 12V, 19-amp/hour, 270 cca (per Battery Council International Rating ) Charging Three-Phase, 38-amp system (439W @ 13V, 2000 rpm, 489W max power @ 13V) Three-Phase, 38-amp system (439W @ 13V, 2000 rpm, 489W max power @ 13V) Three-Phase, 38-amp system (439W @ 13V, 2000 rpm, 489W max power @ 13V) Starting 1.2 kW electric with solenoid shift starter motor engagement 1.2 kW electric with solenoid shift starter motor engagement 1.2 kW electric with solenoid shift starter motor engagement Headlamp Headlamp Headlamp Quartz Halogen, 55-watt low beam, 60-watt high beam Quartz Halogen, 55-watt low beam, 60-watt high beam Quartz Halogen, 55-watt low beam, 60-watt high beam Tail/Stop Lights Tail/Stop Lights Tail/Stop Lights 8W/28W (5W/21W) 8W/28W (5W/21W) 8W/28W (5W/21W) Turn Signal Lights Turn Signal Lights Turn Signal Lights 28W (21W) self-canceling 28W (21W) self-canceling 28W (21W) self-canceling Indicator Lamps Indicator Lamps Indicator Lamps High beam, neutral, low oil pressure, turn signals, engine diagnostics, security system6, 6-speed (overdrive), low fuel warnings High beam, neutral, low oil pressure, turn signals, engine diagnostics, security system6, 6- speed (overdrive), low fuel warnings High beam, neutral, low oil pressure, turn signals, engine diagnostics, security system6, 6-speed (overdrive), low fuel warnings Passing Lamps Chrome Vivid Black Vivid Black Vivid Black Black Cherry Pearl Black Cherry Pearl Black Cherry Pearl Deep Cobalt Pearl Black Pearl Black Pearl Pewter Pearl Fire Red Pearl Deep Cobalt Pearl White Gold Pearl Deep Cobalt Pearl Olive Pearl & Vivid Black Suede Blue Pearl & Vivid Black Suede Blue Pearl White Gold Pearl & Vivid Black Black Cherry Pearl & Pewter Pearl Olive Pearl White Gold Pearl & Deep Cobalt Pearl Fire Red Pearl & Black Pearl Pacific Blue Pearl Deep Cobalt Pearl & Pewter Pearl Pewter Pearl Yellow Pearl White Gold Pearl

Incoming search terms:

2002 Ducati Monster 620ie Dark SPECIFICATIONS AND PERFORMANCE DATA

0

Filed Under (Ducati) by admin on 02-12-2010

download
Type: ……………. air-cooled, 90°L-twin Valvetrain: ..desmodromic, two valves per cylinder, shim-on-valve-stem Size: ……………………………………618cc Bore/stroke:……….80.0mm x 61.5mm Comp. ratio: ………………………. 10.7:1 Fueling: ……………………Marelli 5.9 EFI with two 45mm throttle bodies Exhaust:………………………………2-1-2 DRIVE TRAIN Transmission: …………………. 5-speed Final drive: ……..No. 530 O-ring chain, RPM @ 65 mph/redline….4890/9500 DIMENSIONS Wheelbase: ………………………….. 56.7″ Rake/trail……………………..24.0°/3.54″ Ground clearance: ……………………4.4″ Seat height :…………………………..29.9″ GVWR: …………………………….881 lbs. Wet weight: …………………….. 424 lbs. Carrying capacity: ………………457 lbs. SUSPENSION Front: 43mm inverted cartridge forks, non-adjustable, 5.1″ travel Rear: ……..Sachs monoshock damper with progressive rocker linkage, adj. preload and reb. damping, 5.8″ travel BRAKES Front:……single 320mm disc, Brembo four-piston, double-action caliper Rear: …………………………245mm disc, twin-piston, double-action caliper TIRES & WHEELS Front: …….. 120/60ZR17 Dunlop D205 Sportmax on 3.50″ x 17″ wheel Rear:………. 160/60ZR17 Dunlop D205 Sportmax on 4.50″ x 17″ wheel ELECTRICS Battery: …………………………12V, 12AH Ignition: …………..digital-mapped with throttle position sensor Headlight: …………………………55/60W FUEL Tank capacity: ……………………4.0 gal. High/low/avg. mpg: ….47.7/56.0/ 51.9 MISCELLANEOUS Instruments: ………………speedo, tach, odometer, tripmeter, Indicators: …….. hi-beam, t/s, neutral, oil pressure, immobilizer, LCD clock MSRP: ……………………………… $6495 Valve adj. interval: ……………. 6000 mi. Warranty: ….2 years, unlimited miles. Color: …………………………matte black PERFORMANCE Measured top speed……116.0 mph 0-1/4 mile………………12.52 sec. @ 104.24 mph 0-60 mph………………..4.31 sec. 0-100 mph………………12.29 sec. 60-0 mph……………………113.7′ Power to Weight Ratio……..1:7.81 Speed @ 65 mph indicated ….62.5 Low end Mid-range Top end The 620′s motor produces plenty of thrust with a wide, torquey powerband. High-tech fuel injection gives excellent throttle response and delivers terrific gas mileage, too. The 90°V- twin is smooth running and looks good exposed. TEST NOTES PICKS Terrific value for the price, especially for a Ducati Highly tuned engine doesn’t disappoint Light weight and good handling adds up to fun PANS Clutch shudders and grabs when hot Mirrors need to be wider and further forward Matte black everything isn’t particularly flattering

Ducati 748 – 749 – 999 – 1098 – 848 – 1198 – Streetfighter CGS2 kit installation Manual

0

Filed Under (Ducati) by admin on 25-10-2010

download
Remove body panels uppers and lowers A B C SP electronics ( CGS2 kit installation procedure on Ducati motorbikes models 748 – 749 – 999 – 1098 – 848 – 1198 Streetfighter ) 2) Place the CGS2 eBox near Dashboard. We recommend to arrange all wiring on the right side (Gear indicator display is optional) – Gear indicator display – CGS2 eBox – CGS2 main wiring – CGS2 accessory wiring (*) *NOTE: keep this wiring away from dashboard’s connector! SP electronics ( CGS2 kit installation procedure on Ducati motorbikes models 748 – 749 – 999 – 1098 – 848 – 1198 Streetfighter ) FEED SPEED CW SP electronics ( CGS2 kit installation procedure on Ducati motorbikes models 748 – 749 – 999 – 1098 – 848 – 1198 Streetfighter ) Arrange the Plug&Play wiring under Airbox and between the two strokes for right to left crossing eBox 3) Connect the Plug&Play CGS2 wiring: RPM CSS sMec SP electronics ( CGS2 kit installation procedure on Ducati motorbikes models 748 – 749 – 999 – 1098 – 848 – 1198 Streetfighter ) sMec Arrange the Plug&Play wiring under Airbox and between the two strokes for right to left crossing sMec SP electronics ( CGS2 kit installation procedure on Ducati motorbikes models 748 – 749 – 999 – 1098 – 848 – 1198 Streetfighter) 4) Connect the CGS2 sensor (sMec label) – Sensor wiring – Ducati lever senso

Incoming search terms:

Ducati Monster 600/750/900; Buell S1, X1, M2, Blast Sequential LED Tail Light Installation Manual

0

Filed Under (Ducati) by admin on 25-10-2010

download
1. Please use supplied sub harness to connect the sequential signals 2. Connect the blue and yellow wire on the shorter end of the sub-harness to the corresponding blue and yellow on the LED tail light. Make sure the connector is pushed all the way in and use the green covers to insulate. 3. Disconnect and remove factory signal lamps. We recommend one at a time. 4. Locate the longer end of the sub-harness and connect the blue/black wires to the left signal output and the yellow/black wire to the right signal output. 5. Insulate as necessary and cable tie any wires out of the way

DUCATI TITANIUM EXHAUST SYSTEM INSTALLATION MANUAL

0

Filed Under (Ducati) by admin on 26-10-2010

download
BILLET BRAKE RADIAL MOUNTS Moto Corse brake radial mounts are crafted by precision machine tools as shown, the caliper mount is “box” type precision tooled from single ERGAL 7075 solid piece. The result: performance, reduced weight, quality and beauty unmatched by none used extensively in moto gp as standard technology Moto Corse delivers moto gp technology for the ultimate performance. The kit is available for caliper with bolt distance 108mm or 100mm and includes all the parts to assemble it on the bike. 102143002 102143003 102143005 102143006 102143008 102143009 102143011 raDial MOunt Kit FOr OHlins rOaD &tracK Ø 43 FrOnt FOrKs FOr breMbO racing calipers screW Distance 108MM raDial MOunt Kit FOr OHlins rOaD &tracK Ø 43 FrOnt FOrKs FOr breMbO racing calipers screW Distance 108MM raDial MOunt Kit FOr OHlins rOaD &tracK Ø 43 FrOnt FOrKs FOr breMbO street calipers screW Distance 100MM raDial MOunt Kit FOr OHlins rOaD &tracK Ø 43 FrOnt FOrKs FOr breMbO street calipers screW Distance 100MM raDial MOunt Kit FOr sHOWa Ø 43 FrOnt FOrKs FOr breMbO street calipers screW Distance 100MM raDial MOunt Kit FOr sHOWa Ø 43 FrOnt FOrKs FOr breMbO street calipers screW Distance 100MM raDial MOunt Kit FOr sHOWa Ø 43 FrOnt FOrKs FOr breMbO street calipers screW Distance 100MM Ducati 999s/999r/749r Ducati 748r/996sps/996r/998r/998 eF Ducati 748r/996sps/996r/998r/998 eF Ducati 999s/999r/749/r Ducati 749/749s/999 748/998 – MOnster 1000/s4/s2r Ducati MultistraDa 1000D

Incoming search terms: