exploration equipment manufacturing company ltd inc cn de itl com ru mail

You search Auto repair manual PDF exploration equipment manufacturing company ltd inc cn de itl com ru mail, if there are search results will appear below. If search results do not exist, please search by others keyword.





TVS50 Voice Processing System Installation Manual

0

Filed Under (TVS) by admin on 27-10-2010

download
installation must be performed by a qualified professional installer. If required, provide the telephone company with the following technical information:  The telephone numbers to which the system will be connected Make: Panasonic Model: KX-TVS50 FCC Registration No.: found on the back of the unit Ringer Equivalence No.: 0.4B Facility Interface Code: 02LS2 Service Order Code: 9.0F Required Network Interface Jack: RJ11C Connection to the Telephone Line The VPS unit must not be connected to coin operated telephone lines. Contact the telephone company before connecting this unit to a party line. Telephone Service Problems The telephone company may temporarily discontinue service if the VPS causes problems with the telephone network. Discontinued service usually occurs after prior notification. When prior notification is not practical, the telephone company must:  Promptly notify the customer of the temporarily discontinued service.  Provide the customer with an opportunity to correct the situation or problem.  Inform the customer of the right to bring a complaint to the Federal Communication Commission pursuant to the procedures set forth in Subpart E of Part 68 of the FCC Telephone Equipment Rules. Telephone Network and Terminal Equipment compatibility Availability of Telephone Interface Information When requested by the customer, the telephone company must provide the following information:  technical information concerning interface parameters.  technical information not specified in FCC rules such as the number of ringers that can be connected to a particular telephone line. Changes in Telephone Company Communications Facilities, Equipment, Operations, and Procedures The telephone company may make changes to its communication facilities, equipment, operations, or procedures, when such action is reasonably required in the operation of its business, and is not inconsistent with FCC rules (FCC Telephone Equipment Rules, Part 68). The customer shall be given adequate notice in writing when changes will

Incoming search terms:

INDIAN MOTORCYCLE EQUIPMENT LISTING

0

Filed Under (Indian) by admin on 28-11-2010

download
INDIAN MOTORCYCLE, INC. EQUIPMENT LISTING QTY DESCRIPTION SERIAL # 1 VIPER VT-25 CNC LATHE FANUC 18-T CONTROL MACHINE CENTER 3398080101 1 MIGHTY COMET MILLING 3VHG 98017/98025 1 SHARP MILL PACKAGE LMV 9 X 42 61124334/61124335/31124336 1 VIPER V-1000G CNC MILL MDL VMC 206506 1 CLAUSING C12AX KHS BANDSAW INV328172 LC889967 1 CNC ROTARY HYDRAULIC TUBE BENDING MACHINE – HMT 992L3055 3 AXIS 005B 1 JANCY COLD SAW T315 21006 1 KALAMAZOO AH9W BANDSAW GEI TECHNOLOGY SOLIDWORKS & PDM WORKS, EASTMAN M9000 STATIC TABLE SYSTEM 1 MITUTOYO CORDINATE MEASURING MACHINE 1006804 2 KHS JET DRILL PRESS 2 MOTOMAN -SK16 ROBOT S99354/S994351 LOT TENNESSEE RAND – SCOUT SWING ARM MANUAL WELD FIXTURE, CHIEF SWING ARM MANUAL WELD FIXTURE, SCOUT REAR STRUT MANUAL WELD FIXTURES, CHIEF REAR STRUT MANUAL WELD FIXTURE, ERGONOMIC TOUCH UP AND REPAIR STANDS – BOTH CHIEF & SCOUT INDIAN MOTORCYCLE, INC. EQUIPMENT LISTING QTY DESCRIPTION SERIAL # 1 CROWN FORKLIFT SC4040-35 ISLE PICKER TROJAN BATTERY HOBART CHARGER FORKLIFT – SC4040-35 BATTERY 63257 CHARGER 100C62388 1 CROWN FORKLIFT SP3210-210 1 NISSAN ELECTRIC FORKLIFT – MODEL PE30Y CSPO1-9A1555 1 NISSAN ELECTRIC FORKLIFT – MODEL PE50YSC CWPO2-9C2180 1 NISSAN LIFT TRUCK MODEL P50LP – USED KP50YLP-901370 CROWN FORKLIFT ISLE PICKER 1A206705 KOMUTSU FORKLIFT 506718A 2000 CHEVY FLATBED

Incoming search terms:

New Styles And Features for Ridley's Automatic Motorcycles in 2008

0

Filed Under (Ridley) by admin on 15-11-2010

download
“Our focus is on delivering a motorcycle that fits the needs of the new market. It seems that so many companies are trying to revamp their line by adding a sixth gear. We’re taking the gears completely out of the equation and letting riders get back to actually riding”, said Clay Ridley about the effort his company has directed towards their new product line. Several new unique features are creating interest among Ridley Riders on the company’s riders forum, one of which is a parking brake. “We take comments from the owners of our motorcycles very, very seriously. Ridley Riders have asked for a parking brake for added security”, commented Jay Ridley, Vice President for the company. Added to the long list of improvements for the new year model is the new “2 Year Plus” factory warranty which offers twenty-five months of factory backed warranty. According to Ridley, this new warranty exceeds coverage provided by most other domestic manufacturer’s. One more reason Ridley believes 2008 will be the company’s best selling year model. With the holiday season fast approaching, Ridley Motorcycle felt the introduction of the new models would have more impact if held back until the middle of November. For Ridley, the holiday season means big business. Several of Ridley’s dealers have reported higher sales in December than in May. The company attributed this to their market which is nearly divided in half among men and women.

Toyota Avensis Equipment REMOVAL AND INSTALLATION

0

Filed Under (Toyota Manuals) by admin on 05-10-2011

Trip computer with fuel consumption &average speed display (where standard audio fitted) Outside temperature display Instrument display dimmer Digital odometer with two trip meters Digital Clock Dashboard integrated multi-information display (where standard audio fitted) Fuel Caplocation indicator Rearfoglamps indicator Sequential automatic transmission mode indicator (where sequential automatic fitted) Tachometer Fuel indicator with low fuel warning Water temperature indicator Engine temperature warning Engine management warning Lights Onwarning Door Ajarwarning



2010 Harley-Davidson FLHR Road King front and rear 4-piston braking system Installation

0

Filed Under (Harley Davidson) by admin on 31-10-2010

download
in Vivid Black with blue and silver pinstripes, six-speed. Air-cooled, Twin Cam 96™ engine with Electronic Sequential Port Fuel Injection (ESPFI), ABS, security system, cast wheels with independent front and rear 4-piston braking system. Motorcycle generously donated by Harley-Davidson Motor Company Police & Fleet Sales. MSRP excludes all taxes title/documentary fees, registration, tags, dealer prep, labor and installation charges, insurance, optional equipment and accessories, certificate of compliance or non-compliance fees, and finance charges. Delivery must be coordinated through Rockville Harley-Davidson by November 30, 2010. Winner is responsible for any applicable fees above. 6,000 tickets printed. Odds of winning are 1:6,000. Ticket holder need not be present to win. Licensed by the D.C. Lottery and Charitable Games Control Board. Must be 18 years or older to win. No substitutes, return for cash, or other models. As per IRS tax code, amounts paid for chances in a raffle do not qualify as a deductible charitable contribution. Taxes on prizes are the responsibility of the winner. Harley-Davidson is proud to be a sponsor of the National Law Enforcement Officers Memorial Fund. Harley-Davidson Motor Company is a prize provider only, and Harley-Davidson, Inc., and Harley-Davidson Motor Company have no responsibility regarding conduct or administration of the raffle.

Incoming search terms:

Yamaha V-Star 1100 Needle/ Jet Kit REMOVAL AND INSTALLATION MANUALS

0

Filed Under (Honda) by admin on 27-12-2011

download
To install this needle and jet kit: • Remove carburetors from the engine per Yamaha shop manual procedures. Note: Always perform internal carburetor work in a clean area. • Remove the vacuum slide from each carburetor. • Remove the OEM needle, spacer and washers, noting order of assembly. (Note; the washers are used as shims to raise the needle, each is equivalent to ½ clip position, use these to fine tune the needle) • Counting from the top to the bottom, install the new Baron needle clip on groove #4 of the replacement Baron adjustable needles. The top is the blunt end of the needle. • Reinstall the OEM spacer and washers as shown in the figure below. • Reinstall the vacuum slides along with the diaphragm spring and reattach the diaphragm covers Note: Verify that the slides maintain their full range of movement! • Drain the fuel from the float bowls and remove the bowl covers. • Remove the OEM main jets and replace them with Baron’s supplied Mikuni main jets. Install the “base setting” main jets as indicated above. NOTE: V-Star 1100 carburetion runs staggered jetting! Make sure the front cylinder’s carburetor gets the larger main jet (numerically), and the rear cylinder’s carburetor gets the smaller main jet . Important! Extra jets have been included in your kit. These will help you fine-tune the carburetors for changing conditions. These conditions include climate and weather patterns in your area as well as exhaust equipment on your motorcycle. Barons determines the jet and clip recommendations that best suit your average riding conditions based upon information supplied to us at the time of your order. Changes in weather, altitude or modifications to your exhaust system may require jets other than those supplied. • Thoroughly clean the inside of the float bowls prior to reinstalling them. 311 #1 Industrial Way – Fallbrook, CA 92028 – USA Phone: (760) 731-1200 Fax: (760) 731-1284 E-mail: tech@baronscustom.com Website: www.baronscustom.com Included in this kit: (4)Mikuni main jets #107.5, 110, 112.5, 115, (2) titanium needles, (2) clips, (8) cap-head allen screws Tools required: 3-4-5 mm allen wrenches, 10&12 mm sockets, 10mm end wrench, phillips & flat screwdrivers, pliers, drill. Revision 4.0 • Reassemble the carburetors by reversing the order of above steps. Use the new supplied cap head Allen screws in place of the OEM Phillips head screws for the float bowls. • Locate the fuel mixture screws – they will either be a screw head or a brass plug. If it is a screw head, skip to step c . If you see a brass plug with a small hole in the center, proceed as follows: a. With a 5/32″ drill bit, carefully and slowly drill through the fuel mixture plugs

Incoming search terms:

Harley Davidson BoonDocker Nitrous System Installation MANUAL

0

Filed Under (Harley Davidson) by admin on 01-03-2012

download
BoonDocker Liquid Nitrous – 1589 Hollipark Dr. Idaho Falls, ID 83401 – (208) 542-4411 web site: www. boon dockers. com – email: info@boon dockers. com Revised 02-27-04 Page 2 of 10 This manifold is also designed to vary the float bowl pressure in relation to nitrous pressure, thus keeping the nitrous and fuel delivery in sync. Fluctuations in bottle temperature greatly affect nitrous pressure, which affects nitrous delivery. By automatically adjusting the fuel delivery as nitrous pressure varies, this manifold makes nitrous safe, reliable, and easy to use. Be sure to understand and follow the tuning instructions at the end of these instructions. Proper tuning is an important part of any performance-enhancing product. Part I – Bottle Installation A. Bottle Valve Fittings Insert the 4AN x 1/8″ NPT fitting and the 1/8″ NPT Plug into the bottle valve (these are attached to the lid of the box for the bottle) . Use Teflon tape to seal the threads – be sure not to get tape inside the threads! B. Bottle Mounting Position With nitrous in the bottle, both nitrous liquid and nitrous gas are present under high pressure (760 psi at 70 deg F) . Due to gravity and acceleration forces, the liquid portion of the nitrous will be at the bottom and rearward parts of the bottle. For this nitrous system to work properly, it is important that nitrous liquid be drawn from the bottle. Nitrous vapor will cause a significant decrease in performance. For best results, the bottle should be mounted so the valve is pointed down and towards the back of the vehicle as shown below. ************** *************** ******** ********* *************** (can be installed on top or bottom of air boot) ********** ********* push-button switch (mounts on handlebar) +12 V *********** ************ **** ****** *! “**#$******%* *! “**#$*#*%* 20 deg to 90 Front of motorcycle Rear of motorcycle BoonDocker Liquid Nitrous – 1589 Hollipark Dr. Idaho Falls, ID 83401 – (208) 542-4411 web site: www. boon dockers. com – email: info@boon dockers. com Revised 02-27-04 Page 3 of 10 Bottle mounted inside airbox: For some applications, a small bottle can be mounted inside the airbox as shown. Note: because of the restricted space, it was necessary to mount this bottle at a non-optimal angle (the valve is pointed towards the front instead of the rear)

Incoming search terms:

FLEXIBLE GAS PIPING DESIGN GUIDE and INSTALLATION INSTRUCTIONS

0

Filed Under (S&S) by admin on 29-10-2010

download
Definitions: Grounding : The process of making an electrical connection to the general mass of the earth. This is most often accomplished with ground rods, ground mats or some other grounding system. Low resistance grounding is critical to the operation of lightning protection techniques. Bonding : The process of making an electrical connection between the grounding electrode and any equipment, appliance, or metal conductor: pipes, plumbing, flues, etc. Equipment bonding serves to protect people and equipment in the event of an electrical fault. Equipotential Bonding : The process of making an electrical connection between the grounding electrode and any metal conductor: pipes, plumbing, flues, etc., which may be exposed to a lightning strike and can be a conductive path for lightning energy towards or away from the grounding electrode. 2. The National Fuel Gas Code NFPA 54/ANSI Z223 states, “Each above ground portion of a gas piping system upstream from the equipment shutoff valve shall be electrically continuous and bonded to any grounding electrode, as defined by NFPA 70, National Electrical Code ( ANSI/NFPA 70 1999 Edition.) 3. The TracPipe® gas piping system shall be bonded in accordance with the National Fuel Gas Code, NFPA 54/ANSI Z223. The piping system is not to be used as a grounding conductor or electrode for an electrical system. 4. For bonding of the TracPipe® system, a bonding clamp must be attached to the brass AutoFlare®fitting adapter (adjacent to the pipe thread area – see Figure 4-21) or to a black pipe component (pipe or fitting) located in the same electrically continuous gas piping system as the AutoFlare®fitting. The corrugated stain- less steel portion of the gas piping system SHALL NOT be used as the bonding attachment point under any circumstances. Bonding electrode conductor sizing shall be in accordance with Article 250 (Table 250-66) of ANSI/NFPA 70. The bonding is a requirement of the National Electrical Code

HARLEY DAVIDSON BATTERY CHARGING HARNESS (THREE-PIN) INSTALLATION MANUAL

0

Filed Under (Harley Davidson) by admin on 11-02-2011

download
1. Follow the instructions in your Owner’s Manual to remove the seat and any other components (side covers, etc.) necessary to provide access to the battery. 2. Refer to the applicable view in Figure 1 for your model. Break the battery negative (-) connection by removing the hardware assembly from the negative battery terminal. 3. Break the positive (+) battery connection by removing the hardware assembly from the positive battery terminal. 4. Clean the battery terminals and cable connectors using a wire brush or sandpaper to remove any oxidation. 5. Apply a light coating of Harley-Davidson electrical contact lubricant (Part Number 99861-02) to the battery terminals, cable connectors, battery charging harness ring terminals and connector located under the weather- shield cap. Connect positive (+) battery cable first. If positive (+) cable should contact ground with negative (-) cable connected, the resulting sparks can cause a battery explosion, which could result in death or serious injury. (00068a) 6. Refer to the view in Figure 1 used for disassembly. Install the positive (RED) lead of the harness to the positive (+) battery post following the sequence shown. • On 1999 and earlier models (with original equipment), torque the positive (+) terminal post bolt to 40 in-lbs (4.5 Nm). • On 2000 and later models (with original equipment), torque the positive (+) terminal post bolt to 60-96 in-lbs (6.8-10.9 Nm). 7. Attach the negative (BLACK) lead of the harness to the negative (-) battery post following the sequence shown. • On 1999 and earlier models (with original equipment), torque the negative (-) terminal post bolt to 40 in-lbs (4.5 Nm). • On 2000 and later models (with original equipment), torque the negative (-) terminal post bolt to 60-96 in-lbs (6.8-10.9 Nm). Harness Routing Do not route the harness near any moving parts. Contact with moving parts may result in damage to harness. Refer to the following sections to determine the correct harness routing for your model. Be sure to avoid any components that may pinch or cut the harness, and avoid components that radiate heat. Take up any slack in the cable and store out of sight. Secure the harness with cable straps (H-D Part Number 10006), which can be purchased separately from any Harley Davidson Dealer. VRSC Model Harness Routing 1. See Figure 2. Route the battery harness/ connector (3) toward the front of the bike following the upper left frame tube. Cleanly tuck the in-line fuse (2) into the space in front of the battery. 2. Continue to route the harness/ gray connector to the front of the bike and behind the vent cover. Secure the harness with a cable strap and let the connector protrude past the cover for easy access. Trim any excess from the cable strap

Incoming search terms:

BMW F 650CS Scarver Specifications

0

Filed Under (BMW) by admin on 28-10-2010

download
Motor Type Water cooled, single cylinder, 4 stroke Bore x Stroke 100 x 83 mm (3.93 x 3.26 in) Capacity 652 cc Rated Output 50 bhp (37 KW) at 6,800 rpm (performance reduction 34 bhp (25 Kw at 6,500 rpm possible) Max Torque 62 Nm (46 ft lb) at 5,500 rpm (performance reduction: 50 Nm (37 ft lb) at 3,500 rpm) Compression Ratio 11.5 : 1 Valves Per Cylinder 4 Valve Control DOHC Mixture Control/Engine Management Electronic intake pipe injection / BMW engine management Emission Control Closed loop 3 way catalytic converter Fuel type Unleaded regular grade fuel, minimum octane rating 91 (RON) Power Transmission Clutch Multiple disc clutch in oil bath, mechanically operated Gearbox Constant mesh 5 speed gearbox integrated in the crankcase Gearbox Ratio’s 2.750 / 1.750 / 1.310 / 1.050 / 0.840 : 1 Final Drive 2.94 : 1 Drive Belt Drive with jerk damper in it’s own casing Electrical System Ignition Electronic ignition Alternator 400 W three phase alternator
Battery 12V / 12 ah Chassis Type of Frame Bridging frame consisting of steel profiles with integrated oil tank and rear frame fastened with screws Front wheel suspension Telescopic fork, stanchion diameter 41 mm, fork stabiliser Rear wheel suspension Die cast aluminium single side swinging arm with rear wheel axle adjustable via Excenter, central strut controlled by means of lever system Travel Front/Rear 125 / 120 mm (4.92 x 4.72 in) Wheels Die cast aluminium wheels Wheel Rims, Front 3.00 x 17 Wheel Rims, Rear 4.50 x 17 Tyres, Front 110/70 x ZR 17 Tyres, Rear 160/60 x ZR 17 Brakes, Front Single disc brake , diameter 300 mm (11.8 in), double piston floating caliper Brakes, Rear Single disc brake, diameter 240 mm (9.45 in), 1 piston floating caliper ABS Special equipment BMW Motorrad ABS Dimensions/Weights Length x Width x Height 2142 x 915 (inc. mirrors) x 1158 (not inc. mirrors) (84.33 x 36 x 45.59 in) Wheel Base (in normal position) 1493 mm (58.78 in) Seat Height 780 mm (30.7 in) (special equipment low seat height: 750 mm (29.5 in), 150 series rear tyres; special equipment high seat bench: 810 mm (31.89 in)) Castor (in normal position) 123.3 Steering Head Angle (in normal position) 86 degrees Unladen Weight with Full Tank 187 Kg / 412 lb Dry Weight 169.6 Kg / 373 lb Permitted Total Weight 370 Kg / 815 lb Payload (with standard equipment) 183 Kg / 403 lb Fuel Consumption over 100 Km @ constant 90Kph 3.0 litres / 94 mpg / 78 mpg US

Incoming search terms: