firing order on a kawasaki z1000j

You search Auto repair manual PDF firing order on a kawasaki z1000j, if there are search results will appear below. If search results do not exist, please search by others keyword.



  firing order on a kawasaki z1000j Direct Download speed 5282 Kb/s

  firing order on a kawasaki z1000j Full Version speed 6162 Kb/s



Kawasaki Ninja 650R (ER-6F) & ER-6N Resource Upgrading the Suspension on the Kawasaki ER6-F/ N

0

Filed Under (Kawasaki) by admin on 30-11-2010

download
Top fork is as removed. Kawasaki Ninja 650R (ER-6F) & ER-6N Resource Before removing the fork from the clamps on the yokes I loosened the fork top. Before removing the fork top the fork-slider was placed in a vice and the bottom bolt loosened….. … before finally being removed with the fork upside down. Because the springs were still in situ this gave sufficient tension on the damper-rod to prevent it from turning and allow the bolt to be removed. When I turned the fork the right-way up to remove the fork-top I did it over a container to catch the oil. Kawasaki Ninja 650R (ER-6F) & ER-6N Resource All the OE components that will no longer be required. Left to right. Fork-top, spacer tube, washer, spring, damper-rod. Bottom bolts get re-used. Old and new, laid-out for comparison. The damper unit, minus spring and fork-top, drops inside the stanchion and slider. Kawasaki Ninja 650R (ER-6F) & ER-6N Resource Then the bolt goes back in, as tight as possible, to secure it. Top fork is done, second one awaits. Note the spring seat on the right, just below the spring. This drops over the damping rod after the oil has been added. The small locking-nut screws over the threaded part of the damping-rod next, all the way to the bottom. Spring drops in and then the fork-top screws on to the damping-rod as well, all the way down to the lock-nut which is used to secure it. At this point the stanchion is extended to the fork-top which is screwed in. Job done.

Incoming search terms:

Kawasaki Exhausts – ZX-6 ZX-10 Zx-14 Exhaust – Slip-ons INSTALLATION MANUAL

0

Filed Under (Kawasaki) by admin on 25-10-2010

download
Our favorite exhaust options for Kawasaki ZX Ninjas – ZX-10,ZX-6r, and the new horsepower king, Zx-14.. Grab your horsepower today. We love Rob Muzzy and Muzzy Exhausts.Going back to Doug Chandler and Scott Russell, Muzzy has been synonomous with Kawasaki and performance – and for years, if you rode Kawasaki,and you were on the podium, Muzzy was on your exhaust. We also feature Arrow and Yoshimura exhausts for your ZX-6R, ZX-10 and ZX-14. We love the sound of a Yosh exhaust on any Kawasaki Ninja. Yoshimura Oval (RS-3) Race Slip-On for Kawasaki ZX14R 2006 The easiest and least expensive way to experience Yoshimura performance is with our Slip-On/Bolt-On lines. Bolt-On style bolts to the O. E. M. mid-pipe Slip-On style with its stainless steel easily attaches to the mid-pipe RS-1 is available where noted Usually, no jetting or re-programming is required and installation is a snap Hindle Stainless Exhaust High Head Pipes – Kawasaki ZX6R-RR 03-04 The worlds lightest stainless steel exhaust system. Increase horsepower and torque throughout the entire rpm range. Lightweight, strong stainless steel header design looks great and weighs less than stock headers. Available in low- and high-mo North Denver News http://northdenvernews.com Powered by Joomla! Generated: 19 October, 2010, 12:28 Hindle Stainless Exhaust Low Head Pipes – Kawasaki ZX9R 00-03 The worlds lightest stainless steel exhaust system. Increase horsepower and torque throughout the entire rpm range. Lightweight, strong stainless steel header design looks great and weighs less than stock headers. Available in low- and high-mo

The New Kawasaki ZX-6R Trading in gets easier and easier

0

Filed Under (Kawasaki) by admin on 18-02-2011

download
didn’t go to my local Kawasaki shop expecting to trade in the 2004 636 I’d been happily riding. I honestly didn’t expect there to be anything on the floor that would motivate me to bring the bike in. Some of you reading this may be able to relate to what I am saying, the day you don’t look for something is the day that you find exactly what you didn’t know you need. That was the day I decided I needed to take home the new ZX-6R. The reworking of the new ZX-6R is more than just about looking good. According to KMC the engine has been redesigned from the crankcase up for the first time in ten years. Racing technology built into the new bike is a close-ratio cassette transmission that can be removed without the needing to split the main crankcases in case you needed to make repairs or adjustments at the track. They also tell us that the fuel injection system has shorter throttle bodies with a smaller diameter bore which claim to give this new smaller sized engine more torque in the mid-range. It also comes with a GPS – Gear Position Sensor. The new ZX-6R comes stock with a slipper clutch which is one difference between the 2004 and 2007. My 2004′s rear wheel would hop if I geared down before a corner and my engine rpms were too high. The slipper clutch allows quicker downshifts. To experience the gains of a slipper clutch you don’t have to buy a 2007 Kawasaki – it was introduced to the 636 in 2005. A quick glance at the exhaust might leave the impression that the ZX-6R comes stock with stacked twin small diameter exhaust cans but if you look closely you will see it is a single oval pipe with a shotgun styled end cap. The titanium pipe has the pre-chamber and catalyser located below the engine to keep the weight on the bike low and centered and the temperature of the under seat silencer reduced. Looking at the new Kawasaki with its fairing removed, I wonder how much more it would have cost the consumer to have an exhaust system that not only works wonders but would be worth showing off? Even if some of the systems of the new 600 look better hidden by plastic the bike does have a cohesive look and every year the fit and finish of Kawasaki’s bikes seem to get better. You can look at this bike from almost any angle and nothing jumps out at you – unless you are on the right side of the bike looking at the rear brake reservoir. It seems odd to me that they would leave the rear brake reservoir exposed. Another design feature of the smooth body of the 2007 ZX-6R is the lack of tie down points for any luggage. It can be argued that this is a bike intended for Sunday morning canyon rides or track days on weekends but if you want to take the 600 out for a weekend away then there is aftermarket solution. Ventura Racks allow you go on vacation with your bike. A Ventura Rack provides you with a frame that you attach to your bike that you can secure luggage to. There is no drilling of body work and the Ventura rack I got fit onto the bike perfectly the first try. One of the things I really like about the Ventura Rack is that you can easily attach bags that you may already have or you have the option of buying the Ventura luggage system. Just give yourself time before a motorcycle trip to pack

KAWASAKI STX-12F, STX-15F Riva/Vortech Supercharged STX-15F Engine INSTALLATION MANUAL

0

Filed Under (Kawasaki) by admin on 25-10-2010

download
Our race bred Supercharger System for the Kawasaki STX-15F contains all necessary engine components to produce the ultimate 80mph closed course race craft. Kit contains the same specifications that Team Kawasaki won two 2004 Pro Runabout World Titles with. System produces over 300hp using VP MS109 race fuel (Jet X). Kit includes Vortech Supercharger & Intercooler Forged Racing Pistons, Free flow Exhaust Kit, Race programmed ECU, High volume Injectors & Fuel Pump along with all necessary hardware and detailed installation instructions. Riva/Vortech Supercharged STX-15F Engine (Team Kawi Spec) PERFORMANCE DATA Stock 61 MPH @ 7,600 RPM Supercharged 80+ MPH @ 8,300 RPM RIVA STX-15F OFFSHORE RACE KIT Our Offshore Racing Kit for the Kawasaki STX-15F contains the same components and specifications that Team Kawasaki developed to dominate the international racing circuit. This modification delivers over 200hp producing awesome acceleration and a top speed of over 700mph using VP MS109 race fuel (Jet X). Kit includes high compression racing pistons, performance intake & exhaust cam shafts, Race programmed ECU along with all necessary gaskets and detailed installation instructions

Incoming search terms:

1985-1990 Kawasaki 454LTD EN450 Specifications

0

Filed Under (Kawasaki) by admin on 05-11-2010

download
Minimum Turning Radius 2.5 m (98.43 in) Braking Distance 12.5 m from 50 km/h (41 ft from 31 mph) DIMENSIONS Overall Length 2,205 mm (86.81 in) Overall Width 820 mm (32.3 in) Overall Height 1,220 mm (48.03 in) Wheelbase 1,485 mm (58.46 in) Road Clearance 130 mm (5.12 in) Dry Weight 180 kg (397 lbs) / 180.5 (398 lbs) ENGINE Type DOHC, 2-cylinder, 4-stroke, liquid-cooled Displacement 454 mL (27.7 cu in) Bore & Stroke 72.5 x 55.0 mm (2.85 x 2.17 in) Compression Ratio 10.7 : 1 Starting System Electric Starter Cylinder Numbering Method Left to Right, 1-2 Firing Order 1-2 Carburetors Keihin CVK34 x2 Ignition System Battery and coil (transistorized ignition) Ignition Timing (Electronically advanced) 10° BTDC @ 1,200 r/min (rpm) – 37.5° BTDC @ 10,000 r/min (rpm) Spark Plugs NGK D9EA or ND X27ES-U NGK DR8ES or ND X27ESR-U Lubrication System Forced lubrication (wet sump) Engine Oil SE or SF class SAE 10W40, 10W50, 20W40, or 20W50 Engine Oil Capacity 3.4 L (3.6 US qt) Coolant Capacity 1.4 L (1.5 US qt) Kawasaki 1985-90 454LTD EN450 Specifications Page 2 of 2 TRANSMISSION Transmission Type 6-speed, constant mesh, return shift Clutch Type Wet, multi disc Driving System Belt Drive Primary Reduction Ratio 2.952 (62/21) Final Reduction Ratio 2.720 (68/25) Overall Drive Ratio 6.840 (Top gear) Gear Ratio: 1st 2.571 (36/14) 2nd 1.777 (32/18) 3rd 1.380 (29/21) 4th 1.125 (27/24) 5th 0.961 (25/26) 6th 0.851 (23/27) FRAME Castor 31.5° Trail 139 mm (5.47 in) Tire Size Front: 100/90-19 57S Rear: 140/90-15 70S Fuel Tank Capacity 11 L (2.9 US gal) ELECTRICAL EQUIPMENT Battery 12 V 12 AH Headlight 12 V 60/55 W Tail/Brake Light 12 V 8/27 W x2

Incoming search terms:

Kawasaki KZ750 Twin Carburetor Installation Manual

0

Filed Under (Kawasaki) by admin on 25-10-2010

download
The first Kawasaki KZ750 twin was built in 1975 and sold as a 1976 model as a KZ750B1. For the first four years of production (1976-79), the KZ750B1 through B4 shared identical Mikuni BS38 carburetor assemblies. These assemblies are probably the heaviest twin-carb assemblies ever built and have a couple unique features. The biggest oddity is that the Kawasaki version of the BS38 uses a system where both the pilot jet and main jet are screwed into the float bowl. A good bowl gasket is critical because gas is drawn from the jets into the internal passages that lead to the venturi via channels beneath the gasket inside the float chamber. The pilot jets used are standard BS series fare in that they are Mikuni BS30/96 type but the main jets are unique to Kawasaki BS38 carburetor assemblies. They look like very small air jets and are frequently stripped as they require the correct sized small screwdriver to remove

Incoming search terms:

Kawasaki ZX-6R Trading in gets easier and easier

0

Filed Under (Kawasaki) by admin on 30-11-2010

download
I didn’t go to my local Kawasaki shop expecting to trade in the 2004 636 I’d been happily riding. I honestly didn’t expect there to be anything on the floor that would motivate me to bring the bike in. Some of you reading this may be able to relate to what I am saying, the day you don’t look for something is the day that you find exactly what you didn’t know you need. That was the day I decided I needed to take home the new ZX-6R. The reworking of the new ZX-6R is more than just about looking good. According to KMC the engine has been redesigned from the crankcase up for the first time in ten years. Racing technology built into the new bike is a close-ratio cassette transmission that can be removed without the needing to split the main crankcases in case you needed to make repairs or adjustments at the track. They also tell us that the fuel injection system has shorter throttle bodies with a smaller diameter bore which claim to give this new smaller sized engine more torque in the mid-range. It also comes with a GPS – Gear Position Sensor. The new ZX-6R comes stock with a slipper clutch which is one difference between the 2004 and 2007. My 2004′s rear wheel would hop if I geared down before a corner and my engine rpms were too high. The slipper clutch allows quicker downshifts. To experience the gains of a slipper clutch you don’t have to buy a 2007 Kawasaki – it was introduced to the 636 in 2005. A quick glance at the exhaust might leave the impression that the ZX-6R comes stock with stacked twin small diameter exhaust cans but if you look closely you will see it is a single oval pipe with a shotgun styled end cap. The titanium pipe has the pre-chamber and catalyser located below the engine to keep the weight on the bike low and centered and the temperature of the under seat silencer reduced. Looking at the new Kawasaki with its fairing

2001-2002 GL1800/ A CB Radio Replacement/ REPAIR PROCEDURE

0

Filed Under (Honda) by admin on 29-01-2011

download
For authorization, call the CB Exchange Radio Order Desk toll free: (888) 997-7278 . The CB Exchange Radio Order Desk hours are Monday thru Friday, 8:30am – 8:00pm EST. BEFORE STARTING ANY REPAIR ON THE CB RADIO, YOU MUST FIRST CALL THE ORDER DESK FOR AUTHORIZATION. Part Number: 08E95-MCA-101RM Honda Code: 7066319 3. After calling the CB Radio Order Desk, an exchange transceiver will be shipped overnight (freight prepaid). 4. Replace the faulty CB Transceiver with the exchange unit (see REPAIR PROCEDURE ). . Remove the seat (see the GL1800 Service Manual, page 2-4). 2. Remove the right rear side cover (page 2-4). 3. Remove the right-hand fairing molding (page 2-8). 4. Remove the right hand top shelter setting bolts and mounting nut (page 2-9). It is not necessary to remove the left-hand fairing molding, shelter bolts, or shelter. 5. Disconnect the 14P CD coupler under the rear seat. Remove and set aside the CD Changer (if equipped). (Continued on page 2) Some customers may experience weak radio transmissions and/or the need to use abnormally high squelch settings for reception on the Hondaline CB Radio. To correct this condition, the CB Transceiver unit must be replaced as described in this Service Bulletin. Do not order a CB kit from parts stock. Follow the ordering procedures in this Service Bulletin. AFFECTED MOTORCYCLES 2001 – 2002 GL1800/A ORDERING AND REPLACING THE CB TRANSCEIVER 1. Before calling the CB Exchange Radio Order Desk, have the following information ready: • VIN • Failure Information (i.e., symptom) • Warranty Status 2. For authorization, call the CB Exchange Radio Order Desk toll free: (888) 997-7278 . The CB

Incoming search terms:

Kawasaki ZX-14 Stage I Turbo Kit INSTALLATION MANUAL

0

Filed Under (Kawasaki) by admin on 25-10-2010

download
The following items will need to be addressed in order to prepare your ZX14 for the Stage I Turbo kit installation. Please refer to your Kawasaki service manual for further information. q* Remove the following bodywork: Tank front cover Seat Side Fairing Lower Fairing Lower Rear Cowl q* Drain and remove the fuel tank. q* Drain the cooling system into a clean container so that it can be reused. (This is best done from the drain bolt in the water pump housing, open the filler cap to vent while draining.) Remember that coolant is poisonous. Be sure to keep it away from pets and children and store it in a clearly marked and sealed container. q* Remove the radiator.Remove the exhaust system. q* Remove the air box lids and rear inlet tubes. q* Drain the oil and remove the oil filter. q* Remove the crankcase breather line from the frame (left hand side behind the throttle bodies) and plug this inlet with the provided rubber cap and clamp.(photo 2) q* Remove the oil water trap line and install an 8 x 16mm allen bolt and washer. (photo 2) q* Remove the oil sender unit (on oil pan). q* Remove the upper radiator shroud (attached to engine). This will be modified later to accomodate the 2″ air inlet pipe. q* Remove the secondary butterflies. (photo 1) 1. Heat the screws on each plate using a heat gun on medium heat. 2. Remove the screws and plates. (DO NOT OPEN THE THROTTLE DURING REMOVAL!)

KAWASAKI ZX-10R ROAD TEST And SPECIFICATIONS

0

Filed Under (Kawasaki) by admin on 05-11-2010

download
In the past the name Kawasaki, for me, always suggested legendary fast superbikes with brut power. Then later came the Ninja name tag and there was still a lot of speed there, but amongst the strength of some superb opposition the legend was waning. Well now the legend is back, the new 2008 Ninja ZX-10R brings back all that attitude, styling and raw power of a true superbike. As per my usual form [running a bit late] I picked up the ‘Kwacker’ from D ‘n’ D Motorcycles in Conlig all in a bit of rush. Fortunately for me, Davy the owner was as obliging as ever and kindly let me take the bike straight to the Cookstown 100 road race practice. On arrival, it was out of the van, a quick once over, tyre pressures checked and straight onto the grid to instruct the newcomers’ practice sessions. Luckily, with all the rush, I hadn’t time to dwell on the reputation of the previous models, but after one cautious lap in damp conditions the ZX-10R felt right at home among the racers. First thing I noticed, and appreciated in this situation, was that it steered really well. Turn-in and direction changes felt light and easy with no signs of the questionable high speed stability of previous ZX-10s. Suspension was slightly hard compared to some road bikes, but any softer and we would have been wallowing out of the dips. The front and rear suspension soaked up the bumpy country roads well, with the only adjustment made, being a click harder on the front rebound damping. After a few laps I really did forget I was on a road bike, such was my confidence in the big ‘Kwacker’. Talking high tech features, the ZX-10R apparently has some form of traction control system – (Kawasaki Ignition Management System) KIMS. Bit of a girly name eh! Now I’m not sure exactly how it works on this particular bike, but I can testify to an enormous amount of grip and only

Incoming search terms: