igniter problem ironhorse

You search Auto repair manual PDF igniter problem ironhorse, if there are search results will appear below. If search results do not exist, please search by others keyword.



  igniter problem ironhorse Direct Download speed 5282 Kb/s

  igniter problem ironhorse Full Version speed 6162 Kb/s



ADLY Electric corrosion problem solved

0

Filed Under (Adly) by admin on 27-10-2010

download
makes the most patient equipment manager’s jaw get tight. It’s a messy process that involves draining, disassembly, flushing, and days of downtime. Now, our dealership offers a new, more thorough, less invasive solution to hydraulic contamination that can be brought right to your jobsite. It’s called the Ultra Clean®System. The innovative Ultra Clean hose and tube cleaning system removes contamination by using a pneumatic launcher to shoot a projectile through hydraulic lines and hoses. A “shelled” pump can send a lot of metal debris downstream with the last few gallons of oil that flow through the system. Flushing hydraulic lines with solvent and air can be tedious, and sometimes ineffective, but the Ultra Clean system makes decontaminating hydraulic systems fast and easy. It also lets you skip the hassle of handling and disposing harsh chemicals. It is as simple as disconnecting both ends of a line or hose and launching the specially designed projectile through it. “The Ultra Clean system is more efficient than any other method we’ve tried,” says Scott Dickey, Service Manager, Murphy Tractor, the John Deere dealership in Lincoln, Nebraska. “We no longer worry about the time and expense of hose replacement and tube disassembly for repair service. Ultra Clean is clearly superior than flushing with solvents and air blow-down.” Dickey says the Ultra Clean system is also used to prepare fabricated hose assemblies for over-the-counter sales at his dealership. He points out it has increased the value of parts and service by assuring delivery of cleaned assemblies that are ready for service. Logo sealing tape covers the open assembly ends and assures the customer that the assembly has been cleaned. It also serves as a reminder to keep contamination out of the system when the new assembly is put into place. Cleaning fabricated hoses right after they are constructed is another way in which dealers are taking a proactive approach to reducing contamination in hydraulic systems and reducing the risk of contam- ination. DataTrending Is A Road Map to Less Downtime. It’s important to understand that a little dirt can cost a lot of money if you let it get into your hydraulic system. Dirt circulating in your hydraulic fluid grates like a belt sander on internal machine parts. Trending, along with a proactive approach to contamination control and elimination, can help you prevent this scary scenario. “A little bit of contamination can cause lots of wear and tear in just a short time,” explains Mike Daly, fluid analysis program marketing manager for John Deere Construction & S

BMW MOTO-1 diagnostic scanner user manual

0

Filed Under (BMW) by admin on 24-11-2010

download
1. When testing the motorcycle ECU with the diagnostic scanner, it displays “Communication failure!” what is the problem? How to deal with it? This problem is caused by the reasons as below: 1.1 The ECU model of diagnostic program you choose is different from the ECU model of motorcycle. Some motorcycles are modified. At this time, you can check the detailed model of the ECU, and choose the actual model from the “ECU MODEL” menu to test. 1.2 The ignition switch hasn’t turned on to the “ON” position. 1.3 The cable between the diagnostic scanner and the diagnostic connector of motorcycle isn’t connected reliable. 2. After electrifying the diagnostic instrument, press the switch of the mainframe, it displays white screen or black screen. What is the problem? How to deal with it? 2.1 Maybe you adjusted the adjustable knob of the mainframe by accident to lead the white screen or black screen of the mainframe. After starting up normally, adjust the offside adjustable knob on the top of the mainframe screen to make the mainframe display normally. 2.2 Check the power supply voltage of the diagnostic scanner is normal or not.

Incoming search terms:

HONDA 2002-2004 GL1800/A Linked Braking System (LBS) Proportional Control Valve (PCV) Leakage

0

Filed Under (Honda) by admin on 25-11-2010

download
1. Pump the rear brake pedal four times. •If the brake pedal feels spongy, bleed the brake system per the Service Manual. After verifying proper brake system operation, proceed to step 2 below. •If the brake pedal does not feel spongy, proceed to step 2 below. 2. Place the motorcycle on its side stand, with the handlebars in the full left position . Lock the handlebars. 3. Place a scissor jack directly under the left front brake caliper as shown in the illustration. To avoid damage to the caliper, place a protective piece of rubber (such as a piece of inner tube) between the caliper and the jack. Wind up the jack until the front wheel is approximately 15 mm off the ground. 4. Measure the distance from the secondary master cylinder piston mounting bolt to the edge of the secondary master cylinder body (rod length of the secondary master cylinder). Record this measurement . • If the measured length is 30.3 mm, replace the PCV per the Service Manual. (This length indicates the unit’s secondary master cylinder is fully stroked, which means there is no hydraulic brake pressure acting on the PCV.) After replacing the PCV, proceed to the IDENTIFICATION section of this Service Bulletin. •If the measured length is longer than 30.3 mm , proceed to step 5 below. • INSPECTION/REPAIR PROCEDURE Record this measurement. Pump the rear brake pedal four times.
GL1800/A #16 ©2005 American Honda Motor Co., Inc. – All Rights Reserved 3 of 6 FEBRUARY 2005 5. Wait 30 minutes. Do not disturb the motorcycle in any way during this time. 6. Measure the distance again from the secondary master cylinder piston mounting bolt to the edge of the secondary master cylinder body (rod length of the secondary master cylinder). •If the measurement has decreased more than 1 mm from the measurement you recorded, proceed to step 7 below. •If the measurement is within 1 mm of the measurement you recorded, the PCV is OK. Proceed to the IDENTIFICATION section of this Service Bulletin. 7. Check the PCV for leakage. • If the PCV is leaking , replace the PCV per the Service Manual. After replacing the PCV, proceed to the IDENTIFICATION section of this Service Bulletin. • If the PCV is not leaking , you must diagnose the brake system problem before proceeding. After you have diagnosed and repaired the brake system, proceed to the IDENTIFICATION section of this Service Bulletin. NOTE: Any brake system problem not related to the PCV that is found while performing this Service Bulletin is not covered by this Safety Recall. If the motorcycle’s original factory warranty is still in effect or under HPP, file a normal warranty claim. If the unit is outside its factory warranty period or HPP coverage, contact TechLine for goodwill consideration. 8. Verify proper front and rear brake operation by pumping the front brake lever and rear brake pedal before riding the motorcycle

Kawasaki GEN2 CDI Installation And Removal Instructions

0

Filed Under (Kawasaki) by admin on 25-10-2010

download
Installation: Step 1: Remove the seat to allow access to the factory CDI igniter on the utility machine. See Figure 1. The KFX-700 (V-Force) CDI is located on the right frame rail by the rear tire. The Teryx CDI is located under the driver’s seat, inside the electrical box. See Figure 2. Disconnect the negative battery cable. Locate the stock CDI (located under the seat). Disconnect the connectors from the CDI, and remove the CDI. NOTE: If your machine has had a timing offset key installed (aftermarket equipment), then the timing maps need to be adjusted using the optional USB Memory Interface. The CDI is shipped assuming 5 degrees static timing, and increasing this with an offset key without compensating the maps may lead to engine damage. Figure 1: Figure 2: Step 2: Remove the two #4×4-40 screws from the DB44 connector at the front of the CDI. Plug the Copperhead® wiring harness into the DB44 connector, and secure with the two #4×4-40 screws. The screws should be snug, but do not over tighten. Plug connectors from the Copperhead® CDI to their corresponding connector on the chassis wiring harness. The Copperhead® CDI will be mounted 90 degrees (1/4 turn) from the stock position in most applications. This will allow it to sit between the stock mounting tabs on the pan. See Figure 3 for the BF750i installation and Figure 4 for the Teryx installation. Test fit the unit, and mark the necessary mounting holes. The KFX-700 (V-Force) will require holes to be drilled in the frame to mount the CDI

Incoming search terms:

Ducati streetfighter HID headlight system installation Manual

0

Filed Under (Ducati) by admin on 26-10-2010

download
The installation of this kit requires the removal of the Helmholtz air box between the air intakes, located directly in front of the main air box. You will also need to run a wire from the front of the bike to the back of the bike where the battery is located. 1. Remove the seat, tail section, and fuel tank. 2. Remove the headlight assembly. 3. Replace the headlight bulb with the included HID bulb. You will need to modify the cap for the back of the headlight to allow the wires to pass through. 4. You will need to mount the Ballast, igniter, and the relay for the switch box in the area where the Helmholtz was. (see image) 5. Run the red power wire to the back of the bike and connect directly to the positive lead on the battery terminal. 6. Connect the ground wire the frame where the Helmholtz was previously bolted. 7. Plug the HID bulb into the ballast. There are 3 plugs. They can only be connected one way. 8. Connect the main wire harness to the ballast. 9. Turn the key on and turn the ignition on and check that the headlight comes on. 10. Switch on the brights to make sure this is working as well. 11. Once everything is confirmed to be working make sure the wirings are well attached won’t interfere with the fan or with any of the steering components. 12. Re-install the tank, tail section, and seat

Kawasaki Ninja 250 FAQ

0

Filed Under (Kawasaki) by admin on 15-11-2010

download
Am I too small for this motorcycle? Duke – Sun May 14 17:38:31 2000 I’m only about 5’2″ and don’t have a problem, even though I can only touch the ground with the ends of my toes. Once you get a feel for the balance of the bike it’s not hard to keep everything upright. Only place I have trouble is pushing the bike backwards in a parking lot. Usually I just walk the bike (beside it) to where I can get on and get going. How does the EX500 compare to the EX250? Craig M. – Mon May 22 10:23:29 2000 I have both the EX250 and the EX500; both are Y2K models. The 250 is a screamer that performs well and can easily get me into trouble. My only complaints about the 250 are the excessive nose dive when getting on the front brake hard and the skittishness of the rear during high speed cornering. Both are easily corrected with suspension adjustments, I’ve just been too lazy to get the parts and do the work. A bit more wind protection would be great too. The 500 addresses these problems, the diving of the front end (to a degree); the rear’s skittishness and the wind protection. A plus for the 500 is the greater torque and power off the line; it pulls stronger (in my opinion) and will get you into illegal speed territory just a bit quicker than the 250. With greater weight, is has more stability in high speed and windy situations. Insurance is just about the same for both, with the 250 getting the nod for gas mileage. Service requirements are almost identical for both as well, being that they’re both parallel twins, the technology is the virtually the same. The downfalls of the 500: $2K more than the 250 (can do a lot to the 250 with that kind of money); buzzy mirrors, barely useful; heavier weight to have to push around the garage; lesser gas mileage (55-60 MPG; 250 pushes 70 MPG easily); engine is worse than a nervous dog shaking around at idle and at speed (here the 250 is far superior and much smoother). In my opinion, the 500 is a better suited for a larger rider, from a comfort standpoint. I feel I can stretch out a bit more on it than the 250 (I’m 5′ 9″, 160 lbs). The 250′s brakes are better tuned than the 500 and the shifter is much smoother. That may be due to the 3,500 mile difference between the two bikes. Bottom line, both bikes are great, the 250 is now my wife’s ride (mainly) and the 500′s mine (unless she steals the keys away). In time, I’ll make the adjustments to the 250; she doesn’t push it like I do.

Incoming search terms:

BMW Motorcycle R1100/ 850 Model Throttle Cables

0

Filed Under (BMW) by admin on 16-11-2010

download
Problem: Engine surges at constant speed. Difficult to adjust and balance the left and right throttle bodies. Cause: Differences in opening and closing of the throttle butterflies caused by friction in the throttle cable. Remedy: 1. Fit a low friction throttle cable. 2. Check the following to ensure optimum results: Ignition timing Spark plugs (FR 6DDC) type / condition (reference SI 2739 in Main Group 12) Valve clearances Correct Cat. code plug Check throttle housing inlet manifold for air leaks 3. Synchronize the throttle butterflies as illustrated on the attached procedure. Note: Make sure there are no obstructions in the vacuum stub pipe prior to connecting the Synchro tool. Parts: 32 73 1 342 149 R 1100 RS 32 73 1 342 150 R 1100 RT, R, & GS Information: The Low friction throttle cable was introduced into series production as follows: R 1100 RS from 0312537 onwards (06/95 prod.) R 1100 GS from 0381479 onwards (06/95 prod.) R 1100 R from 6379238 onwards (06/95 prod.) R1100RT from 0440499 onwards (06/95 prod.) R 850 from the start of production Warranty: The BMW Motorcycle Limited Warranty will cover the replacement of the throttle cable for motorcycles in the affected VIN range. Authorization is not Required . File a warranty claim, using the following information:

Incoming search terms:

All Victory Models OIL CHANGE KIT

0

Filed Under (Victory) by admin on 13-11-2010

download
1. Warmup the engine for several minutes. 2. Stop the engine. Securely support the machine on its sidestand. IMPORTANT: Take the proper precautions sot hem achinedoes not tip while working on it. Place an oil pan under the engine and loosen the oil fill cap/ dipstick. 3. Remove the drain plug (1) and drain the oil. 4. Remove the oil filter (2). 5. Reinstall the drain plug with anew sealing washer or O-rIngfromthekit. Torque drain plug to the specification listed in the Owner’sManualorService Manual. 6. Apply alight coat of engine oil to theO-ring of the new oil filter. Make sure the O-ring is seated properly in the groove on the filter. 7. Install filter and tighten it 3/4 of a turn after O-ring contacts engine case. 8. Remove the fill cap/dipstick and fill the engine with the amount of oil recommended in the Owner’sManualor Service Manual and reinstall the dipstick /filler cap. 9. Start the engine and warm it up for several minutes and check for leaks. If any leaks are found, stop the engine and determine the source of the problem before starting the engine again. Contact your Victory dealer if you cannot determine the source of the leak. NOTE: After the engine is started, the oil indicator light should go off. If the indicator light flickers or remains on, immediately stop the engine and take your motorcycle to a Victory dealer. 10. Stop the engine and inspect oil level (refer to the Owner’sManualorService Manual). 11. Install the fill cap/dipstick and tighten securely

TVS50 Voice Processing System Installation Manual

0

Filed Under (TVS) by admin on 27-10-2010

download
installation must be performed by a qualified professional installer. If required, provide the telephone company with the following technical information:  The telephone numbers to which the system will be connected Make: Panasonic Model: KX-TVS50 FCC Registration No.: found on the back of the unit Ringer Equivalence No.: 0.4B Facility Interface Code: 02LS2 Service Order Code: 9.0F Required Network Interface Jack: RJ11C Connection to the Telephone Line The VPS unit must not be connected to coin operated telephone lines. Contact the telephone company before connecting this unit to a party line. Telephone Service Problems The telephone company may temporarily discontinue service if the VPS causes problems with the telephone network. Discontinued service usually occurs after prior notification. When prior notification is not practical, the telephone company must:  Promptly notify the customer of the temporarily discontinued service.  Provide the customer with an opportunity to correct the situation or problem.  Inform the customer of the right to bring a complaint to the Federal Communication Commission pursuant to the procedures set forth in Subpart E of Part 68 of the FCC Telephone Equipment Rules. Telephone Network and Terminal Equipment compatibility Availability of Telephone Interface Information When requested by the customer, the telephone company must provide the following information:  technical information concerning interface parameters.  technical information not specified in FCC rules such as the number of ringers that can be connected to a particular telephone line. Changes in Telephone Company Communications Facilities, Equipment, Operations, and Procedures The telephone company may make changes to its communication facilities, equipment, operations, or procedures, when such action is reasonably required in the operation of its business, and is not inconsistent with FCC rules (FCC Telephone Equipment Rules, Part 68). The customer shall be given adequate notice in writing when changes will

Air Shock Installation Instructions

0

Filed Under (Tips and Review) by admin on 24-11-2010

download
Air HoseInstallation. Choose the most convenient loca- tiononyour motorcycle for the air fill valve. Drilla 5/16″hole and install the air fill valve as shown in Figure 3orsecure air fill valve to frame tube. 2. Keep hose ends clean during installation because dirt can cause air leaks. 3. Install hose connector, tube clamp and two O-rings onto one end of the air hose (See Figures4&5) Apply rubber lubricant (soap solution, not oil) to the O-rings to ease installation on the air hose& into the shock absorber inlet. Plastic connector should just bottom on fitting. Do not overtighten! The function of the nut is to hold everything together in place, the O- rings do the sealing. Fin- gertightenonly (10 in/lb maximum). 4. After routing the air hose, trim the length to fit air fill valve. Install hose connector, tube clamp, and twoO-rings onto end of hose (See figures 4&5). Lubricate as above and assemble to air fill valve. Use the same procedure formating hose. Important —leaveasmall amount of slack in hose near shock absorber to allow for the slight move- mentofthe shock. Caution! Do not install hose near ex- haustsystem, battery or any other sharp edges or seat movement. Keep hoses clear of moving parts such as wheels or suspension components. Do not allow hoses to have excess slack and sag below the motorcycle. The hoses could catch on road surfaces or debris and could be damaged while the motorcycle is in motion. 5. If necessary the air hose can be secured along the motorcycle’swiringharness with tie-wraps. 6. Testing: Inflate system to 50 psi. Apply soapy water solution to all connections and check for air leaks. If there are any leaks, disconnect the suspected fitting and check for dirt or damage to the air line or the O-rings. Remove any dirt or foreign matter, re-lubricate the O-rings and reinstall. If unable to locate the leak, remove rubber boot from shocks and submerge pressurized components under water (in- cludingT-Valve) and check for leaks. If you cannot solve the air leak problem, please contact our technical staff for assistance