kawasaki bajaj ct 100 specifications

You search Auto repair manual PDF kawasaki bajaj ct 100 specifications, if there are search results will appear below. If search results do not exist, please search by others keyword.



  kawasaki bajaj ct 100 specifications Direct Download speed 5282 Kb/s

  kawasaki bajaj ct 100 specifications Full Version speed 6162 Kb/s



Sanyang JET 50/100 and JET Euro 50/100 Specifications And Service Manual

0

Filed Under (Sym) by admin on 24-11-2010

download
Carbon monoxide If you must run your engine, ensure the place is well ventilated. Never run your engine in a closed area. Run your engine in an open area, if you have to run your engine in a closed area, be sure to use an extractor. Caution Exhaust contains toxic gas which may cause one to lose consciousness and even result in death. Gasoline Gasoline is a low ignition point and explosive material. Work in a well-ventilated place, no flame or spark should be allowed in the work place or where gasoline is being stored. Caution Gasoline is highly flammable, and may explode under some conditions, keep it away from children. Used engine oil Caution Prolonged contact with used engine oil (or transmission oil) may cause skin cancer although it might not be verified. We recommend that you wash your hands with soap and water right after contacting. Keep the used oil beyond reach of children. Hot components Caution Components of the engine and exhaust system can become extremely hot after engine running. They remain very hot even after the engine has been stopped for some time. When performing service work on these parts, wear insulated gloves and wait until cooling off. Battery Caution y Battery emits explosive gases; flame is strictly prohibited. Keep the place well ventilated when charging the battery. y Battery contains sulfuric acid (electrolyte) which can cause serious burns so be careful do not be spray on your eyes or skin. If you get battery acid on your skin, flush it off immediately with water. If you get battery acid in your eyes, flush it off immediately with water and then go to hospital to see an ophthalmologist. y If you swallow it by mistake, drink a lot of water or milk, and take some laxative such as castor oil or vegetable oil and then go to see a doctor. y Keep electrolyte beyond reach of children. Brake shoe Do not use an air hose or a dry brush to clean components of the brake system, use a vacuum cleaner or the equivalent to avoid dust flying. Caution Inhaling dust may cause disorders and cancer of the breathing system. Brake fluid Caution Spilling brake fluid on painted, plastic, or rubber parts may cause damage to the parts. Place a clean towel on the above-mentioned parts for protection when servicing the brake system. Keep the brake fluid beyond reach of children

Incoming search terms:

KAWASAKI Jet Ski STX-12F SPECIFICATIONS

0

Filed Under (Kawasaki) by admin on 05-11-2010

download
FEATURES & BENEFITS Kawasaki 2007 SPECIFICATIONS: JT1200D7F Engine type……………… 4-stroke, water cooled, 4- cylinder Displacement…………… 1,199 cm3 Bore & stroke…………… 83.0 x 55.4 mm Compression ratio…… 11.2:1 Induction system……… DOHC 16 valve (4 valves per cylinder) Maximum power………. 92 kW (125 PS) / 7,200 r/min Maximum torque……… 125 N·m / 6,500 r/min Cooling system……….. inducted water Fuel system…………….. EFI with single 54 mm throttle Starting ……………………. electric Battery…………………….. sealed, 12V 18Ah Propulsion system…… axial flow, single stage jet pump Maximum thrust………. 3,675 N (375 kgf) Seating capacity………. 3 seater Fuel capacity…………… 62 L L x W x H…………………. 3,120 x 1,180 x 1,050 mm Dry weight……………….. 334 kg Colours……………………. Red NOTE: Specifications subject to change without notice ENGINE Ñ Chrome composite plated cylinders are lightweight, durable and quickly carry heat away from the combustion chamber and piston for supreme durability at high power output. Ñ Semi-dry sump uses a single feed oil pump. Ñ Tip over protection shuts the engine off if the craft tilts more than 61o. Ñ 4-valves per cylinder provides maximum valve area for optimum flow. Fuel system Ñ Electronic Fuel Injection (EFI) with a single Mitsubishi throttle body and an injector at each intake port. Ñ Long intake tract enhances low-end power. Ñ Large capacity, low-noise airbox. Ñ Finger-type throttle reduces hand fatigue. Water-jacketed semi-dry exhaust Ñ Double-walled exhaust manifold and dual waterboxes help reduce noise. Ñ Water surrounding the exhaust system lowers engine compartment temperatures for more power. Ñ Semi-dry exhaust system keeps cooling water out of the exhaust before the waterbox to prevent water from entering the engine if the boat should capsize. Ñ Emissions meet US EPA 2006 and CARB 2008 regulations. Lanyard engine stop switch Ñ Engine will not crank with lanyard removed. Ñ Fastened to the rider, lanyard cuts the ignition if the rider dismounts. DRIVE SYSTEM Three-blade oval edge stainless steel impeller Ñ The shape of the blades give maximum efficiency with minimum cavitation. Ñ Fully enclosed impeller for damage protection. Ñ Stainless steel pump insert increases durability and helps ensure reliable performance. Ñ Tough stainless steel is used for incredible durability. HULL Ñ One-piece chopper over foam (COF) hull construction is lighter than a conventional hand-laid hull of similar size. Ñ Cab forward design makes more space for the rider and passengers. Ñ Gel coat for deep, lustrous, scratch resistant finish. Ñ Open rear deck for carrying bulky items, putting on skis, etc. Ñ
An automatically retractable boarding step makes boarding from deep water easy. Kawasaki Smart Steering (KSS) Ñ A steering sensor is linked to the EMM to aid in boat handling when the throttle is quickly released from high speed. Detail features Ñ 62 litre fuel tank for increased range. Ñ LCD instrumentation includes digital speedometer, tachometer, hour meter, clock, trip distance, trip time, fuel level and warning lamps. Ñ Includes high tech. troubleshooting function for the fuel injection system. A computer hook-up allows easy retrieval of entire troubleshooting history. Ñ A remote cooling system flushing point is included. Ñ Front hatch made of ABS for reduced weight, increased durability and enhanced appearance. Ñ Mirrors mounted on the deck reduce weight and enhance appearanced

Incoming search terms:

1992 Kawasaki ZZR 1100 technical specifications

0

Filed Under (Kawasaki) by admin on 04-11-2010

download
Kawasaki ZZR 1100 1992: technical specifications Rating: 8.1 Performance: 7.7 Reliability: 9.3 Appearances: 8.3 Price/Quality: 7 # votes: 3 GENERAL Model Kawasaki ZZR 1100 1992 Category Sport
ENGINE Type 1052 cc, water cooled, 4 – cylinders in line, 4-stroke
Bore x stroke (mm) 76 mm x 58 mm Valves 4 valves per cylinder Power
146 hp (108.9 kW) @ 10500 rpm Torque 110 Nm (81.1 ft. lbs) @ 8500 rpm TRANSMISSION Gearbox 6 speed Final drive Chain WHEELS Front
The above specifications are subject to change without notice. Trademarks and logos of third parties used in the Site are exclusive property of the respective own

Incoming search terms:

KAWASAKI KLX 450R Specifications

0

Filed Under (Kawasaki) by admin on 05-11-2010

download
Specifications KLX™450R Suspension, front 48mm Kayaba twin-chamber inverted cartridge fork with 20-way compression and 20-way rebound damping Suspension, rear Bottom-Link UNI-TRAK® with adjustable preload, 22-way low-speed and stepless high-speed compression and 22-way rebound damping Wheel travel, front/rear 12.0/12.4 inches Ground clearance 12.6 inches Tire, front 80/100-21 51M Tire, rear 110/100-18 64M Brake, front 250mm disc with 2-piston caliper Brake, rear 240mm disc with single-piston caliper Seat height 37.0 inches Fuel capacity 2.1 gallons Dry weight 253.5 pounds Color Lime Green Engine type 4-stroke, liquid-cooled DOHC Single Displacement 449cc Bore x stroke 96 x 62.1mm Compression ratio 12.0:1 Valve system DOHC, 4 valves Carburetion Keihin FCR Ignition Digital AC-CDI Starting Electric Transmission 5-speed Rake/trail 27.7º/4.8 inches Frame type Perimeter, aluminum Wheelbase 58.3 inches

Incoming search terms:

Kawasaki Ninja 650R (ER-6F) & ER-6N Resource Upgrading the Suspension on the Kawasaki ER6-F/ N

0

Filed Under (Kawasaki) by admin on 30-11-2010

download
Top fork is as removed. Kawasaki Ninja 650R (ER-6F) & ER-6N Resource Before removing the fork from the clamps on the yokes I loosened the fork top. Before removing the fork top the fork-slider was placed in a vice and the bottom bolt loosened….. … before finally being removed with the fork upside down. Because the springs were still in situ this gave sufficient tension on the damper-rod to prevent it from turning and allow the bolt to be removed. When I turned the fork the right-way up to remove the fork-top I did it over a container to catch the oil. Kawasaki Ninja 650R (ER-6F) & ER-6N Resource All the OE components that will no longer be required. Left to right. Fork-top, spacer tube, washer, spring, damper-rod. Bottom bolts get re-used. Old and new, laid-out for comparison. The damper unit, minus spring and fork-top, drops inside the stanchion and slider. Kawasaki Ninja 650R (ER-6F) & ER-6N Resource Then the bolt goes back in, as tight as possible, to secure it. Top fork is done, second one awaits. Note the spring seat on the right, just below the spring. This drops over the damping rod after the oil has been added. The small locking-nut screws over the threaded part of the damping-rod next, all the way to the bottom. Spring drops in and then the fork-top screws on to the damping-rod as well, all the way down to the lock-nut which is used to secure it. At this point the stanchion is extended to the fork-top which is screwed in. Job done.

Incoming search terms:

KAWASAKI ZX-10R ROAD TEST And SPECIFICATIONS

0

Filed Under (Kawasaki) by admin on 05-11-2010

download
In the past the name Kawasaki, for me, always suggested legendary fast superbikes with brut power. Then later came the Ninja name tag and there was still a lot of speed there, but amongst the strength of some superb opposition the legend was waning. Well now the legend is back, the new 2008 Ninja ZX-10R brings back all that attitude, styling and raw power of a true superbike. As per my usual form [running a bit late] I picked up the ‘Kwacker’ from D ‘n’ D Motorcycles in Conlig all in a bit of rush. Fortunately for me, Davy the owner was as obliging as ever and kindly let me take the bike straight to the Cookstown 100 road race practice. On arrival, it was out of the van, a quick once over, tyre pressures checked and straight onto the grid to instruct the newcomers’ practice sessions. Luckily, with all the rush, I hadn’t time to dwell on the reputation of the previous models, but after one cautious lap in damp conditions the ZX-10R felt right at home among the racers. First thing I noticed, and appreciated in this situation, was that it steered really well. Turn-in and direction changes felt light and easy with no signs of the questionable high speed stability of previous ZX-10s. Suspension was slightly hard compared to some road bikes, but any softer and we would have been wallowing out of the dips. The front and rear suspension soaked up the bumpy country roads well, with the only adjustment made, being a click harder on the front rebound damping. After a few laps I really did forget I was on a road bike, such was my confidence in the big ‘Kwacker’. Talking high tech features, the ZX-10R apparently has some form of traction control system – (Kawasaki Ignition Management System) KIMS. Bit of a girly name eh! Now I’m not sure exactly how it works on this particular bike, but I can testify to an enormous amount of grip and only

1985-1990 Kawasaki 454LTD EN450 Specifications

0

Filed Under (Kawasaki) by admin on 05-11-2010

download
Minimum Turning Radius 2.5 m (98.43 in) Braking Distance 12.5 m from 50 km/h (41 ft from 31 mph) DIMENSIONS Overall Length 2,205 mm (86.81 in) Overall Width 820 mm (32.3 in) Overall Height 1,220 mm (48.03 in) Wheelbase 1,485 mm (58.46 in) Road Clearance 130 mm (5.12 in) Dry Weight 180 kg (397 lbs) / 180.5 (398 lbs) ENGINE Type DOHC, 2-cylinder, 4-stroke, liquid-cooled Displacement 454 mL (27.7 cu in) Bore & Stroke 72.5 x 55.0 mm (2.85 x 2.17 in) Compression Ratio 10.7 : 1 Starting System Electric Starter Cylinder Numbering Method Left to Right, 1-2 Firing Order 1-2 Carburetors Keihin CVK34 x2 Ignition System Battery and coil (transistorized ignition) Ignition Timing (Electronically advanced) 10° BTDC @ 1,200 r/min (rpm) – 37.5° BTDC @ 10,000 r/min (rpm) Spark Plugs NGK D9EA or ND X27ES-U NGK DR8ES or ND X27ESR-U Lubrication System Forced lubrication (wet sump) Engine Oil SE or SF class SAE 10W40, 10W50, 20W40, or 20W50 Engine Oil Capacity 3.4 L (3.6 US qt) Coolant Capacity 1.4 L (1.5 US qt) Kawasaki 1985-90 454LTD EN450 Specifications Page 2 of 2 TRANSMISSION Transmission Type 6-speed, constant mesh, return shift Clutch Type Wet, multi disc Driving System Belt Drive Primary Reduction Ratio 2.952 (62/21) Final Reduction Ratio 2.720 (68/25) Overall Drive Ratio 6.840 (Top gear) Gear Ratio: 1st 2.571 (36/14) 2nd 1.777 (32/18) 3rd 1.380 (29/21) 4th 1.125 (27/24) 5th 0.961 (25/26) 6th 0.851 (23/27) FRAME Castor 31.5° Trail 139 mm (5.47 in) Tire Size Front: 100/90-19 57S Rear: 140/90-15 70S Fuel Tank Capacity 11 L (2.9 US gal) ELECTRICAL EQUIPMENT Battery 12 V 12 AH Headlight 12 V 60/55 W Tail/Brake Light 12 V 8/27 W x2

Incoming search terms:

KAWASAKI KX 85 SPECIFICATIONS

0

Filed Under (Kawasaki) by admin on 05-11-2010

download
ENGINE Type 2-stroke single with KIPS power valves Displacement 84 cc Bore and Stroke 48.5 x 45.8 mm Compression Ratio Low speed 10:1 High speed 9.2:1 Carburettor Mikuni VM24SS Induction 2-petal carbon fibre piston reed valve Ignition Digital CDI Starting Primary kick Cooling Liquid Lubrication Pre-mix (32:1) DRIVETRAIN Transmission 6-speed, Return Final drive Chain Clutch Wet multi-disc, manual FRAME Type High-tensile steel perimeter type Suspension: front 36 mm inverted telescopic fork with 18-way compression damping rear Bottom-Link Uni-Trak with 4-way compression and 16-way rebound damping. Fully adjustable preload Wheel travel: front 275 mm rear 275 mm Tyre: front 70/100-17 rear 90/100-14 Caster (rake) 27° Trail 89 mm BRAKES Front Single 220 mm disc Front caliper Dual-piston Rear Single 184 mm disc Rear caliper Single-piston DIMENSIONS Overall length 1,820 mm Overall width 735 mm Overall height 1,055 mm Wheelbase 1,255 mm Ground clearance 340 mm Seat height 840 mm Dry weight 65 kg Fuel capacity 5.5 litres PERFORMANCE Max. power 21.0 kW {28.5 PS}/ 10,500 rpm Max. torque 17.2 N·m {1.75 kgf·m}/ 11,000 rpm

Kawasaki Exhausts – ZX-6 ZX-10 Zx-14 Exhaust – Slip-ons INSTALLATION MANUAL

0

Filed Under (Kawasaki) by admin on 25-10-2010

download
Our favorite exhaust options for Kawasaki ZX Ninjas – ZX-10,ZX-6r, and the new horsepower king, Zx-14.. Grab your horsepower today. We love Rob Muzzy and Muzzy Exhausts.Going back to Doug Chandler and Scott Russell, Muzzy has been synonomous with Kawasaki and performance – and for years, if you rode Kawasaki,and you were on the podium, Muzzy was on your exhaust. We also feature Arrow and Yoshimura exhausts for your ZX-6R, ZX-10 and ZX-14. We love the sound of a Yosh exhaust on any Kawasaki Ninja. Yoshimura Oval (RS-3) Race Slip-On for Kawasaki ZX14R 2006 The easiest and least expensive way to experience Yoshimura performance is with our Slip-On/Bolt-On lines. Bolt-On style bolts to the O. E. M. mid-pipe Slip-On style with its stainless steel easily attaches to the mid-pipe RS-1 is available where noted Usually, no jetting or re-programming is required and installation is a snap Hindle Stainless Exhaust High Head Pipes – Kawasaki ZX6R-RR 03-04 The worlds lightest stainless steel exhaust system. Increase horsepower and torque throughout the entire rpm range. Lightweight, strong stainless steel header design looks great and weighs less than stock headers. Available in low- and high-mo North Denver News http://northdenvernews.com Powered by Joomla! Generated: 19 October, 2010, 12:28 Hindle Stainless Exhaust Low Head Pipes – Kawasaki ZX9R 00-03 The worlds lightest stainless steel exhaust system. Increase horsepower and torque throughout the entire rpm range. Lightweight, strong stainless steel header design looks great and weighs less than stock headers. Available in low- and high-mo

Incoming search terms:

2008 KAWASAKI KL650A8F: KLR 650 General And Tuning Engine Specifications

0

Filed Under (Kawasaki) by admin on 05-11-2010

download
Engine Type 4-stroke, Inline, 1-cylinder, DOHC, Liquid cooled Displacement 651 cc Bore x Stroke 100.0 x 83.0 mm Compression Ratio 9.8:1 Maximum Torque 36.9 lb-ft at 5,500 rpm Carburetor Keihin CVK40, Constant velocity, Diaphragm-type Ignition System Magneto CDI (Rotor) Ignition Advance Electronic Crankshaft Rotation Clockwise from ignition (RH) side Cylinder Material Aluminum alloy with ferrous sleeves Fuel Min 91 Research/87 Avg. Oct. Unleaded OK Coolant 50% distilled water/50% ethylene glycol base antifreeze —Capacity 1.05 L (1.1 qt.) —Level Level with radiator filler neck. Transmission Clutch Type Wet, Multi-disc, Manual Transmission 5-speed, Constant mesh, Return shift Shift Pattern(Bottom up) 1-N-2-3-4-5 Gear Ratios —1st 2.27 (34/15) —2nd 1.44 (26/18) —3rd 1.14 (25/22) —4th 0.95 (21/22) —5th 0.79 (19/24) Primary Ratio 2.28 (75/33) Final Ratio 2.87 (43/15) Overall Ratio (Top Gear) 5.157 Chassis Wheelbase 1,480 mm (58.3 in.) Seat Height 890 mm (35.0 in.) Ground Clearance 210 mm (8.3 in.) Dry Weight 175 kg (386 lb.) Fuel Tank Capacity 22.1 L (5.8 gal.) Tire Size —Front 90/90-21 54S —Rear 130/80-17 65S Brake Type —Front Single Hydraulic Disc —Rear Single Hydraulic Disc Brake Size —Front 254 mm Effective Diameter —Rear 212 mm Effective Diameter Wheel Travel —Front 206 mm (7.9 in.) —Rear 185 mm (7.3 in.) Model Identification Year & Model ’08 KL650A8F:KLR 650 Color 1. Blue 21 (S8) 2. KMT. Candy Lime Green (175) 3. Sunbeam Red (H1) VIN Range JKAKLEE1 * 8DA00101 — Engine No. Range KL650AE007501— Engine No. Location RH top crankcase, below carburetor Tuning Specifications Engine Valve Clearance (Cold) Intake: 0.10-0.20 mm Exhaust: 0.15-0.25mm —Adjustment Method Shim on tappet Spark Plug NGK DPR8EA-9 or ND X24EPR-U9 —Gap 0.8-0.9 mm Ignition Timing 10.0° BTDC (“F” mark) at 1300 rpm 30.0° BTDC (In double marks) at 3300 rpm Pilot Screw Sealed—not adjustable Idle Speed 1300 ±100 rpm Engine Oil API SE, SF, or SG, API SH or SJ of JASO MA Class, 10w40 —w/Filter Change 2.5 L —No Filter Change 1.7 L —Level On center stand, wait 5 min, middle of window —Pressure (Hot) 2.0-2.5 kg/cm2 at 4,000 rpm, 90° C Chassis Fork Oil SAE 10W20 —Capacity 581 – 589 cc dry —Level 170 ±2 mm (fork compressed, spring removed) Fork Air Pressure (Cold) 0.0 kg/cm2 , max 2.5 kg/cm2 Tire Pressure (Cold) —Front 22 psi, change for course and rider preference —Rear 22 psi, change for course and rider preference Drive Chain Slack 35-45 mm (on center stand, tightest point, STD)

Incoming search terms:

Incoming search terms: