klx 125 smokes when cold

You search Auto repair manual PDF klx 125 smokes when cold, if there are search results will appear below. If search results do not exist, please search by others keyword.



  klx 125 smokes when cold Direct Download speed 5282 Kb/s

  klx 125 smokes when cold Full Version speed 6162 Kb/s



2010 CSR Naked 125 Engine and transmission Chassis, suspension, brakes and wheels

0

Filed Under (CSR) by admin on 27-10-2010

Model: CSR Naked 125 Year: 2010 Category: Naked bike Rating: Price as new (MSRP): Euro 2199. Prices depend on country, taxes, accessories, etc. Engine and transmission Displacement: 124.80 ccm (7.62 cubic inches) Engine type: Single cylinder, four-stroke Fuel system: Carburettor Cooling system: Liquid Transmission type, final drive: Chain Chassis, suspension, brakes and wheels Frame type: Steel Front tyre dimensions: 90/90-13 Rear tyre dimensions: 130/90-15 Front brakes: Single disc Rear akes: Single disc Physical measures and capacities Dry weight: 161.0 kg (354.9 pounds) Weight incl. oil, gas, etc: 179.0 kg (394.6 pounds) Overall height: 1,085 mm (42.7 inches) Overall length: 2,110 mm (83.1 inches) Overall width: 650 mm (25.6 inches) Fuel capacity: 18.00 litres (4.76 gallons) Other specifications nStarter: Electric Color options: Black, silver Comments: Also called NKT 125. Spanish brand. Further information Parts and accessories Check out parts and accessories from our partners.nAsk questions Join the 10 CSR Naked 125 discussion group. Insurance, loans, tests Check out insurance here. Search the web for dealers, loan costs, tests, customizing, etc. Related bikes List related bikes for comparison of specs

Incoming search terms:

Ural Motorcycle Repair Manual

0

Filed Under (Ural) by admin on 11-11-2010

download
FLUID CAPACITIES TOURIST & -10 Models Sportsman Solo Gasoline tank 19 L / 5 Gal 19L / 5 Gal 18.5 L / 4.9 Gal Reserve 2L / 0.5 gal 2L / 0.5 gal 2L- / 0.5 Gal Engine crankcase 2 L / 2 qt. + 3.6 oz. 2.0L / 2.11 qt 2 L / 2 qt. + 3.6 oz. Gearbox 0.9L / 1 qt 0.9L / 1 qt 0.9L / 1 qt Final drive 110 ml / 3.85 oz. 150 ml / 5.25 oz. 110 ml / 3.85 oz. Telescopic Forks (-10 & solo models) N/A on Tourist N/A on Sportsman 135 ml / 4.56 oz. Shock Absorbers 105 ml / 3.55 105 ml / 3.55 oz 105 ml / 3.55 oz
RUNNING GEAR TOURIST / SPORTSMAN SOLO Frame Tubular welded Rear wheel suspension Swing arm with hydraulic spring shock absorbers Sidecar: same as -40 Solo: Lower spring rate Front fork Leading link Telescopic spring Sidecar Cushioned body (on rubber cushions) and wheel on long-lever suspension with hydraulic spring shock absorber N/A Brakes Shoe-type with mechanical drive on front, rear and sidecar wheels, front wheel has dual cams. Tires 4″ x 19″ Front & Side: 22 psi cold Rear: 36 psi cold 3.5″ x 18″ Solo: Front 25 psi cold Rear: 32 psi cold -10′s: Front & side: 25 psi cold Rear: 36 psi cold CLEARANCES mm in Valves with engine cold 0.05 0.002 Between spark plug electrodes 0.50 – 0.65 0.020 – 0.026 Between brake shoes and drum 0.3 – 0.70 0.012 – 0.028 Backlash between tooth faces of bevel gears in final drive 0.1 – 0.3 0.004 Between rotor and ignition pickup 0.3 – 0.4 .012 – .016 FREE TRAVEL / ADJUSTMENTS mm in Hand brake control lever 5 – 8 0.2 – 0.3 Clutch control lever 5 – 8 0.2 – 0.3 Foot brake drive pedal ¼ of full stroke of pedal, 25 – 30 1.0 – 1.2 Toe-in throughout motorcycle center distance (exception: Sportsman 0 ° toe-in) 10 N/A Angle of motorcycle inclination to vertical plane (camber angle of rear wheel) 1° away from sidecar N/A Headlight installation (with motorcycle laden) horizontal (high beam) TORQUE SPECIFICATIONS Metric (in repair manual) US Equivalent Location on Bike 29 to 33 Nm 22 ft/lb. to 30 ft/lb. cylinder heads 22 to 25 kgf-m 175 ft/lb. to 185 ft/lb. fly wheel tightening screws 3.8 to 4.2 kgf-m 30 ft/lb. to 40 ft/lb. cylinder 2.1 to 3.0 kgf-m top 14 ft/lb. to 22 ft/lb. shock absorber 3.6 to 5.0 kgf-m bottom 28 ft/lb. to 36 ft/lb. shock absorber 3.0 to 3.4 kgf-m 22 ft/lb. to 26 ft/lb. bearing nut 3.0 to 3-4 kgf-m 22 ft/lb. to 26 ft/lb. final drive to swing arm bolts 1.6 to 1.8 kgf-m 12 ft/lb. to 14 ft/lb. oil pump bolt .8 to 1.0 kgf-m 5 ft/lb. to 8 ft/lb. engine sump 1.4 to 1.8 kgf-m 10 ft/lb. to 14 ft/lb. final drive case nuts 7 to 9 kgf-m 50 ft/lb. to 66 ft/lb. nut fastening the pinion bearing 2.2 to 2.8 kgf-m 16 ft/lb. to 20 ft/lb. reverse gear brake lever 1.8 to 2.0 kgf-m 14 ft/lb. to 16 ft/lb. generator gear nut 14.0 to 16.8 kgf-m 100 ft/lb to 120 ft/lb steering stem nut CONVERSIONS To convert from mm to in, divide by 25.4 (there are 25.4 mm per inch). To convert from liters to gallons, divide by 3.785 (there are 3.78 liters per gallon). To convert from liters to quarts, multiply by 1.056 (there are 1.056 quarts per liter). To convert from liters to pints, multiply by 2.112 (there are 2.112 pints per liter). To convert from km to miles, multiply by .62 (there is .62 mile per km). To convert from km/hr to mph, multiply by .62. To convert from Newton-meter (Nm) to inch-pound, multiply by 8.86. To convert from cm 3 (cc) to pints, divide by 473 (there are 473 cc per pint). To convert Celsius to Fahrenheit, F° = C° x 1.8 = 32°. To convert Fahrenheit to Celsius,C ° = (F° – 32° ) divided by 1.8

Aprilia Sportcity One 125 Technical Specifications

0

Filed Under (Aprilia) by admin on 06-11-2010

download
Engine Single cylinder 4-stroke. Forced air cooling. 2 valve head with overhead camshaft. Fuel Unleaded petrol. Bore and stroke 57 x 48.6 mm. Displacement 124 cc. Compression ratio 12:11 (125 cc). Maximum power 7.0 kW (9.52 HP) at 8,000 rpm. Max torque 10.04 Nm at 7,000 rpm. Fuel system Carburettor, Ø 26 mm. Ignition Electronic inductive discharge ignition with variable advance. Starting Electric. Alternator 300 W. Lubrication Wet sump. Forced circulation with mechanical pump. Gearbox Automatic variator. Clutch Automatic centrifugal dry clutch. Primary drive V belt. Final drive Gearbox. Frame Single cradle frame in high strength steel tube. Front suspension Hydraulic telescopic fork with 32 mm stanchions. Wheel travel 85 mm. Rear suspension Engine unit acting as swingarm. Single hydraulic shock absorber with adjustable spring preload. Wheel travel 84 mm. Brakes Front: 220 mm stainless steel disc with twin piston floating caliper. Rear: 140 mm drum. Wheels Light alloy. Front: 3.00 x 14″. Rear: 3.50 x 14″. Tyres Tubeless. Front: 120 / 70 x 14″. Rear: 120 / 70 x 14″. Dimensions Overall length: 1950 mm. Overall width: 740 mm. Wheelbase: 1358 mm. Seat height: 775 mm. Fuel tank Capacity 7.5 litres (including 1.5 litre reserve)

2011 APRILIA RS4 125 Engine and transmission Specifications

0

Filed Under (Aprilia) by admin on 24-11-2010

Engine type: 1 cylinders, 4-stroke, Single
Displacement: 125 cc (7.64 cubic inches)
Bore × stroke: 58 mm × 47 mm (oversquare – shortstroke)
Cooling system: Water cooled
Power: 16.04 HP (11.8 kW)
Throttle: Cable operated
Valves
Valve train: DOHC, variable
Valves per cylinder: 4
Fuel and ignition
Sparks per cylinder: 1
Fuel supply system: Fuel injection
Ignition type: Digital CDI
Compression: 12.5:1
Engine mounting: Transverse
Lubrication system: Wet sump
Gear box: Manual 6-speed
Clutch: Wet, multiple discs, cable operated
Final drive: Chain
Starter: Electric
Dimensions
Physical measures
Length: 1953 mm
Width: 740 mm
Height: 1138 mm
Wheel base: 1350 mm
Seat height: 820 mm
Weight
Curb weight: 120 kg

APRILIA QUASAR 50-100-125-180 maintenance Manual

0

Filed Under (Aprilia) by admin on 26-11-2010

download
CHANGING ENGINE OIL CAUTION In case of oil leakage or malfunctions, contact an Aprilia Authorised Dealer . Do not dispose of oil in the environ- ment. Dispose of engine oil – stored in a sealed container – through the nearest waste oil reclamation firm or through the supplier. Carefully read page 34 (MAINTE- NANCE) To change engien oil: ◆ Ride for a few kilometres until engine reaches the operating temperature, then stop the engine. ◆ Position a graduated container (1), under the drain plug (2). ◆ Loosen oil filler plug (4) and drain plug (2). ◆ Let oil flow out of the sump. ◆ Loosen oil filter (3) and carefully clean it. ◆ Refit the filter and tighten fully. ◆ Tighten drain plug (2) and pour recommended oil into filler plug (4), see page 58 (LUBRICANT CHART). ◆ Tighten the filler plug. CAUTION Carefully tighten filler and drain plugs and ensure oil does not leak out. Periodically check for leaks at the casing cover gasket. Do not use the vehicle with insufficient lubrication or with contaminated or unsuitable lubricants, since this would cause early wear of the moving parts and may also cause irreparable failures Fluid reservoir (1) is under rear right wheelhouse. CAUTION Position the vehicle on firm and flat ground. ◆ Make sure that the fluid contained in the reservoir exceeds the ” MIN ” mark stamped on the reservoir. MIN = minimum level. WARNING Do not use the vehicle if the braking system is leaking fluid. CAUTION Do not use the vehicle if the fluid is below the “MIN” mark. 1
27 use and maintenance Quasar 50 – 100 – 125 – 180 CAUTION Brake fluid level decreases as the brake pads wear down. Should the level be too low: ◆ Check the brake discs and pads for wear, see page 27 (CHECKING THE BRAKE PADS FOR WEAR) If the pads and/or the disc do not need re- placing: ◆ Contact an Aprilia Authorised Dealer that will top up the fluid. WARNING Check the brake for proper operation. When the brake lever has exceeding travel or if you notice a loss of braking, contact an Aprilia Authorised Dealer . The braking system may need bleed- ing. CHECKING THE BRAKE PADS FOR WEAR Carefully read page 26 (BRAKE FLUID – recommendations) , page 26 (DISC BRAKES) and page 34 (MAINTE- NANCE). Periodically check brake pad wear. The rate at which brake pads will wear depends on vehicle usage, riding style and road surface condition. Outlined below is a quick brake pad inspection procedure: ◆ Visually check between brake disc and pads, check both pads (1) looking from the bottom at the rear end. ◆ Should friction material (of even one pad only) be worn down to 1.5 mm of thickness, have both pads replaced

2008 KTM 125 SX, 144 SX, 250 SX OWNER'S MANUAL

0

Filed Under (KTM) by admin on 25-11-2010

download
Short circuit button (SX) The short circuit button [1] turns off the engine. When pressing this button, the ignition circuit is short-circuited. Filler cap To open it: Press the release button [2] and turn the tank cap in a counterclockwise direction. To close it: Put the tank cap back on and turn in a clockwise direction until the release button snaps into place. Install tank breather hose [3] without kinks. Fuel tap OFF In this position the fuel tap is closed. No fuel can flow to the carburetor. ON During operation the twist grip must be turned to ON. This means that the fuel can flow to the carburetor. Choke knob When pulling the choke knob [4] fully towards the top, a bore is opened in the carburetor. Through this bore the engine can take in additional fuel. This results in a rich fuel-air mixture, that is needed for a cold start. When pressing the choke knob downward in the carburetor, the bore is closed again. ON OFF 4 1 2 3 ENGLISH 7 Shift lever The shift lever is mounted on the left side of the engine. The position of the gears is shown in the illustration. Neutral, or the idle speed, is located between first and second gear. OPERATION INSTRUMENTS » Kickstarter The kickstarter is mounted on the left side of the engine. Its upper part can be swivelled. Foot brake pedal The foot brake pedal is disposed in front of the right foot rest. Its basic position can be adjusted to your seat position (see maintenance work). 1 N 2,3,4,5, (6) 2 3 1 Compression damping of fork Hydraulic compression damping determines the reaction when the fork is compressed. The degree of compression can be adjusted with adjusting screws at the bottom of the fork legs. Turn the screw [1] clockwise to increase damping, turn it counterclockwise to reduce damping during compression. STANDARD ADJUSTMENT: -turn adjusting screw clockwise as far as it will go -turn it back by as many clicks as are specified for the relevant type of fork Typ WP Suspension 14187D01 . . . . .14 clicks Typ WP Suspension 14187D03 . . . . .14 clicks

TOYOTA E ECU / COLD START INJECTOR TIME SWITCH MODIFICATION

0

Filed Under (Toyota Manuals) by admin on 17-10-2011

download
Before replacing an ECU or a cold start injector time switch, perform a thorough inspection to verify that all engine mechanical, fuel and electrical/electronic systems are to recommended specifications. PARTS RETURN INFORMATION: The replacement ECU’s are remanufactured by Nippondenso-Los Angeles (NDLA). In order to maintain cores for rebuilt units, the original ECU must be sent to NDLA as soon as it has been replaced.

Incoming search terms:

Kawasaki KFX KLX 400 Camshafts Installation Instructions

0

Filed Under (Kawasaki) by admin on 25-10-2010

download
Remove the plug bolt from the back of the cam chain tensioner assembly. It is under pressure from the spring. Remove the spring and pin. Remove the bolts and tensioner assembly from the cylinder. Release the lock on the tensioner assembly and push the tensioner rod into the assembly so that it is fully retracted. Remove the eight 5mm Allen headed bolts that hold the cam caps in place. Remove the cam caps; be aware of the locating dowels in the caps to keep them from falling into the engine. It may be necessary to pry very lightly on the caps to lift them off their dowel pins. Do not use the cam lobe as the pry point. Lift the intake camshaft out of its pocket in the cylinder head casting. Remove the cam chain from the sprocket, set the stock camshaft aside. Lift the exhaust cam out of its pocket in the cylinder head casting and remove the chain from the sprocket. Do not drop the cam chain; dangle it over the side of the engine while keeping slight upward pressure on the chain to maintain its position on the drive sprocket on the crankshaft. Using assembly lube, lube the shim buckets and bearing surfaces for the camshafts in the cylinder head. Set the exhaust camshaft into the cylinder head casting while at the same time fitting the cam chain over the sprocket. Make sure that you keep all the cam chain slack to the back of the engine. Repeat the above process for the intake camshaft. Again, make sure you keep the chain slack to the cam chain tensioner side of the engine. Check to be sure the crankshaft is still at TDC. Check the location of the cam lobes. The camshafts are marked, and preset to 108-degree centers. If the lobes are not where they should be, adjust the positioning of the camshaft by rotating the sprocket one tooth on the chain. Do this until it is in the correct position as before you removed the camshafts. Check the positioning of the crankshaft for the TDC mark

KAWASAKI KLX 140 160cc BORE KIT INSTALLATION INSTRUCTIONS

0

Filed Under (Kawasaki) by admin on 25-10-2010

download
Engine assembly requires special attention to detail. Your cylinder must be bored to fit this new piston. For long engine life it is very important that the cylinder bore is professionally machined to be very round and without taper. Piston-to-Cylinder Clearance: .002″ Ring End Gap: .007″ – .012″ Once the cylinder is bored to size, installation of this piston kit is identical to OEM installation. Please refer to the Kawasaki shop manual or a qualified mechanic for assistance.The side of the piston marked EX should go toward the exhaust port. Coat both sides of copper gasket with a quality gasket sealer. (Gasgacinch or comparable product) Every effort has been made to insure the quality of this product. Because BBR cannot control the installation or use there is NO warranty or guarantee with this product. Using quality motorcycle oil will help prolong engine life. Be sure to change it often. Recommended main jet: 100 Main (at sea level, 65 degrees) Recommended Fuel: 91-93 octane pump fuel

KAWASAKI KLX 450R Specifications

0

Filed Under (Kawasaki) by admin on 05-11-2010

download
Specifications KLX™450R Suspension, front 48mm Kayaba twin-chamber inverted cartridge fork with 20-way compression and 20-way rebound damping Suspension, rear Bottom-Link UNI-TRAK® with adjustable preload, 22-way low-speed and stepless high-speed compression and 22-way rebound damping Wheel travel, front/rear 12.0/12.4 inches Ground clearance 12.6 inches Tire, front 80/100-21 51M Tire, rear 110/100-18 64M Brake, front 250mm disc with 2-piston caliper Brake, rear 240mm disc with single-piston caliper Seat height 37.0 inches Fuel capacity 2.1 gallons Dry weight 253.5 pounds Color Lime Green Engine type 4-stroke, liquid-cooled DOHC Single Displacement 449cc Bore x stroke 96 x 62.1mm Compression ratio 12.0:1 Valve system DOHC, 4 valves Carburetion Keihin FCR Ignition Digital AC-CDI Starting Electric Transmission 5-speed Rake/trail 27.7º/4.8 inches Frame type Perimeter, aluminum Wheelbase 58.3 inches

Incoming search terms: