kuwait pumice powder manufactures co ltd mail

You search Auto repair manual PDF kuwait pumice powder manufactures co ltd mail, if there are search results will appear below. If search results do not exist, please search by others keyword.





BLACK POWDER COATED ANTI-VIBRATION PEGS INSTALLATION INSTRUCTIONS

0

Filed Under (Harley Davidson) by admin on 21-12-2010

download
These pegs, mounts and hardware have a nickel/chrome base coat under the satin black powder coat finish. This is done to prevent any rust or corrosion at the wear points. Its is normal for some of the black powder coating to wear off (exposing the nickel/chrome base) where the pegs pivot on the mounting blocks and on the bolt heads. Again this is normal and they will not rust at these points. If desired the satin black finish can be touched up using a satin black model or spray paint.

2010 Toyota Motorsports/ TRD USA Contingency Award Program

0

Filed Under (Toyota Manuals) by admin on 29-09-2011

download
To enroll in the program, complete the registration form included in the enclosed material and mail, fax or e-mail it to TRD per the instructions at the bottom of the form. Contact personnel are listed on the attached 2010 Contingency Award Guidelines sheets. These people are available to assist you throughout the year. Parts Ordering: If you are planning to order Toyota parts during 2010 you must supply us with your Visa or Master Card credit card number at the time you register in the program. There is a line on the registration form for this number. See the attached Parts Ordering Guidelines for detailed information on how to order parts. TRD is looking forward to working with each of you, and we wish you a very successful year with your racing program

Incoming search terms:

HONDA 420 RANCHER 2×4/4×4 2007-2009 CLUTCH KIT INSTRUCTIONS

0

Filed Under (Honda) by admin on 22-12-2011

download
Remove key from the ignition switch. Remove the side panels from both sides. Remove both foot wells. 2. Drain coolant. Remove the oil drain plug from the motor; if you carefully drain it into a clean container you should be able to reuse it. 3. Disconnect shift motor (on electric shift models only). Remove coolant hoses. 4. Remove the bolts that mount the front differential to the frame, no other parts need to be removed. Carefully slide the front differential towards the front of the machine; you might need to lift up slightly to get the differential to move. Remove the drive shaft. Remove o-ring on output shaft (on motor). 5. Remove the fuel pump. 6. Loosen the front crankcase cover bolts, keep track of each bolt length and location. Slowly remove the crankcase cover. Carefully watch for o-ring shims and dowel pins that may fall out. 7. Unstake the nut holding the clutch on and remove nut. Using Honda tool #07933-HB3000A thread the large part of the tool into the center of the clutch. Tighten the center bolt on the tool while holding the large part of the tool with a wrench. This will pull the clutch off the machine. Place the clutch on a clean work surface. EPI performance.com
8. Using the c-clamps push down slightly on the outside cover and remove the four e-clips. Keeping track of which way they come off, remove the round metal plates one at a time. This will allow you to see the complete spring. Remove one end of each spring using a spring tool or needle nose pliers and then remove springs. Install the EPI springs by inserting the spring into the outer edge first. Using a spring tool or pliers (45 degree bent pliers work well) pull on the spring and insert the end into the hole. Install the metal plates and the e-clips. If you can’t get the plates to sit flat make sure each clutch arm is flat against the bottom plate of the clutch. Occasionally when you put the springs on, the clutch arms will pop up. Slide the clutch into the machine. The Sprague clutch is marked “outside” when installing make sure this is facing out. Torque clutch nut to 87 ft/lbs. 9. Clean the gasket surface on the motor and on the cover. Put a thin layer of Honda Bond or Yamabond semi-drying liquid gasket (or something similar as long as it is semi-drying) on the crankcase cover. Carefully install crankcase cover, do not force cover on. Torque bolts to 9 ft/lbs. 10. Install the fuel pump. 11. Install the o-ring on the output shaft (on motor) and install the drive shaft. Carefully slide the front differential back into place and mount to the frame. Install the coolant hoses. Refill your engine coolant to the proper level according to your owner’s manual. 12. Install the oil drain plug. Refill your engine to the proper level according to your owner’s manual. You can reuse your oil if it is clean and was drained into a clean container. Only use manufactures recommended oil. 13. Be sure to double check coolant and oil levels and to look for any leaks after the machine has run for a few minutes. 14. Go out and ride your machine. If your performance doesn’t seem right double check to make sure everything has been done properly. 15. EPI is constantly testing our products. Sometimes there is a need to contact the user with new technical information. To ensure that you are receiving this information visit our web site EPIperformance.com to register your clutch kit.

Incoming search terms:

Kawasaki KFX450 Slip On INSTALLATION AND REMOVAL INSTRUCTIONS

0

Filed Under (Kawasaki) by admin on 25-10-2010

download
Kit includes 1 Mid pipe 1 Silencer 1 Silencer clamp 1 8×20 bolt 1 quiet core Installation instructions Save your stock parts. Some may be used for installation of new pipe! 1. Remove your stock silencer leaving the stock head pipe. 2. install mid pipe sliding it over the end of the stock head pipe. 3. place the Silencer onto the mid pipe. Make sure the clamps are in correct position. Loosely mount the silencer w/ the provided 8×20 bolts. 4. Tighten the silencer bolt (torque to manufactures specs). 5. Make sure the clamps are tightened to the silencer. 6. Install LTE’s Gen 3 TFI that is programmed for optimum performance w/ no tuning. 7. After running this unit for the first 15-20 minutes allow the system to cool and re-check the system for any loose bolts or nuts. It is also good to check the spark plug to see that you are not running to lean or rich. NOTE: TFI Gen 3 specs are for sea level with the airbox lid removed for optimum performance. Check your packing after 20hrs of riding for optimum power and lowest db levels. It is your responsibility to read and understand these instructions.

Suspension Basics for BMW Motorcycles

0

Filed Under (BMW) by admin on 30-11-2010

download
tires: Tires are the first part of any suspension system. The design of the tire and even the pressure you run can have a profound affect on the way your motorcycle handles. Stiff, low profile tires will give a sharper feel to the bike, as will higher tire pressures. Those of us who ride our GS’s off the road will decrease the tire pressure to about 50% of the street spec when we are in the dirt. The tire then becomes a very active part of the suspension, but will wallow like an old pig if not re-inflated when pressed back into pavement duty. It still surprises me when we have a customer complain that his BMW needs new shocks when they come in with nearly flat tires. It is possible that the best dollars-per- unit improvement you can make to your BMW may be in keeping the tires inflated. Chassis: There is not much that we can do about the chassis design, unless we are Troy the Welder, but it is a fact that different frames and swing arms flex differently and therefore are part of the suspension. On the Airheads, we often braced various parts of the frame and swing arms, resulting in improved handling that even mere mortals could appreciate. On the latest BMW’s it would take the likes of a Valentino Rossi to even notice if the parts were stiffened. Stiffer is not always better. One of the Japanese racing bike manufactures controls the stiffness of the frame in various areas to allow some flex for better handling. So, Mr. Rossi might not even like it if Troy stiffened his new BMW. Springs: Springs control the ride height of the motorcycle and the ability to allow for different loads. On most BMW’s there is a way to adjust the spring preload to some extent so that the ride can be optimized for a light rider or two-up operation with luggage. Dampers: Dampers control the speed and frequency at which the suspension operates by changing the kinetic (moving) energy to thermal (heat) energy. Without the damper, the suspension would oscillate as each movement occurred, resulting in decreased vehicle control. Dampers on BMW’s fall into two main groups. On airheads, older K bikes, F and G models, and the R1200 HP-2, the front dampers are integrated into the forks. On the rear of the above mentioned -3 – models, and on both ends of all the rest of the bikes, there is a more common shock absorber, around which the spring is located. The HP-2 uses an air spring and air dampened rear shock. Seat: OK, folks, this is here for my old buddy Jeff. We know that a seat isn’t part of suspension, but a bad one sure can make you miserable. We have sent dozens of seats to our friend Mike Harris for inexpensive mods that might improve your riding enjoyment more than any suspension changes you could make! Let us know if we can help you with this most important item

1989 TOYOTA PAINT CODES AND REFINISH PAINT FORMULA CODES

0

Filed Under (Toyota Manuals) by admin on 22-10-2011

download
A listing of all 1989 Toyota Paint Codes and Color Names, including refinish paint codes for five major automotive paint manufactures – BASF (R-M), Dupont, PPG (Ditzler), Sherwin-Williams (Acme, Rogers, Martin-Senour), and Sikkens, is attached for your reference. Please note: Color numbers 042 and 049 are Tricoats (three-layer paint): base color coat, pearl (mica) coat and clearcoat. All colors listed as pearl or metallic have a clearcoat finish. Sikkens paint formula codes use the abbreviation “Toy” plus the Toyota paint code (for example, the paint formula code for 8G1 is Toy8GI) Martin-Senour paint formula codes are the same as Sherwin Williams codes for all new 1989 colors. Contact your Martin-Senour/NAPA dealer for all carryover 1989 paint formula codes. Please contact your local refinish paint representative if you encounter color match problems or require the actual paint mixing formula.

Incoming search terms:

Kawasaki KLR 650 Fork Brace Installation Manual

0

Filed Under (Kawasaki) by admin on 25-10-2010

download
1. Place your motorcycle on its center stand or appropriate support stand. Slide up fork boot (if applicable) from fork leg. 2. Remove the two outer caps (6mm x 16mm bolts), and slightly loosen the inner bridge mounting bolts (6mm x 50mm bolts). 3. Position the Fork Brace assembly, so it is level side to side. Then fasten the outer caps on each side making sure it is resting all the way down on the fork tubes. The spacers provide MUST be used for adequate tire clearance. 4. Now check the bridge if it is free of tension. Move your front forks through the suspension travel. 5. Tighten the inner bridge bolts securely, and then collapse the forks completely to check for interference with any accessories or fender. Make sure you have nothing causing your suspension to bind. Slip your fork boots over the Fork Brace. Installation is now complete. Double check all nuts and bolts for tightness. Recheck all nuts and bolts after a short test ride. Periodically check bolts as part of your pre-ride inspection. * WARNING: Ride stability and handling will be greatly improved with Fork Brace, provided your motorcycle complies with the manufactures specifications. BE SURE that the front tire is properly inflated and balanced, and not out-of-round. Check to see that front and rear suspension air pressure and oil levels are correct. Failure to comply with any or all set standards may adversely affect the handling of your motorcycle

FC Shock Spring Installation Guide

0

Filed Under (Tips and Review) by admin on 14-12-2010

download
Installation: 1. Remove the fork springs according to the OEM Owner’s Manual. 2. Check/adjust fork oil level and weight according to OEM Specifications. Caution: Most inverted forks will not require the use of any shim washers or spacers. In cases where use is necessary with the twin chamber style fork, the shims must be placed at the bottom of the spring. Most conventional forks (non-inverted) will use shim washers or spacers at the top of the fork spring. 3. Install Factory Connection fork springs and refer to OEM Owner’s Manual for proper assembly procedures. 4. Be sure to double check all fasteners. Note: Most modern day forks require special tools for disassembly and assembly of the components. Examples : Showa 47/49mm Twin Chamber, KYB 48mm Twin Chamber, WP 07 SX Models/SXS Components. Installing fork springs is an intricate process that should be performed with extreme care by a qualified suspension technician. Failure to install the springs correctly could cause damage to one or more components of the fork. This damage, although not readily apparent, could lead to unexpected failure or rider injury. Factory Connection manufactures models specific fork springs. Installation of a Factory Connection spring not designed for your motorcycle may result in unexpected failure and rider injury. Please consult your Factory Connection spring dealer or call Factory Connection directly if you are unsure about a spring/or springs. 1. Factory Connection’s Limited Lifetime Warranty Factory Connection warrants, to the original retail purchaser (“consumer”) who retains ownership of the vehicle on which the suspension spring(s) (“products(s)”) was originally installed, all suspension springs for life against factory defects in material and workmanship (other than defects in finish) when used under normal use and operating conditions. 2. Your Remedy Upon verification of warranty coverage, Factory Connection at its option will replace defective or prematurely worn-out product (s), without charge, or refund the purchase price of the products(s). This is the Consumer’s sole and exclusive remedy for any loss or damage, however arising, due to a nonconformity or defect in the product(s). 3. Warranty Claim Procedure To make claim under this warranty, the consumer should contact the Factory Connection dealer or Factory Connection where the product(s) was purchased. Factory Connection reserves the right to test the returned product(s) to evaluate the nonconformity or possible defect. The Consumer is responsible for all costs of returning the defective or prematurely worn-out product(s) to the Factory Connection dealer as well as all costs for removing the product(s) from and installing the products(s) on the vehicle.

Incoming search terms:

YAMAHA Fuel System REMOVAL AND INSTALLATION MANUAL

0

Filed Under (Yamaha) by admin on 19-01-2012

STAINLESS STEEL bracket made of marine grade Stainless Steel for ultimate corrosion protection and durability. Available in 1/ 4 ” and 3/ 8 ” inlet/outlet versions. b ALUMINUM bracket 3/ 8 ” inlet/outlet for easy installation on high-horsepower boats. Filter Features… Filter Features… Filter Features… Filter Features… Filter Features… * 28 Micron filter element shaped into 66 pleats.More pleats means more capacity. * Steel end caps on elements. More Filter Features… More Filter Features… More Filter Features… More Filter Features… More Filter Features… * Heavy duty spring. * Powder coated outside, epoxy coated inside for corrosion protection. * Meets OEM specifications. * Will not separate 2 cycle oil from gasoline. * Do not use with diesel fuel. * Made in the U.S.A. * Best flow rate of all major brands * New attractive retail packaging

BMW R 1150 RT-P SPECIFICATION

0

Filed Under (BMW) by admin on 04-12-2010

download
Rear Radar Mount The stationary mount protects the antenna from exhaust and allows saddlebag removal without disturbing the mount. Mounting can be done with either a stationary or movable mount. R 1150 RT -P
Rear Visibility Optional rear duplex LED lights, combined with optional supplementary LED brake/taillight, provides the ideal combination of visibility while presenting a neat, clean appearance. Exceptional Visibility Side-mounted LED lights provide warning to motorists when an officer approaches. The LED units flood the front left and right quadrants with intense light that precedes the officer into an intersection or dangerous traffic situation. Front side-lights are mounted low to reduce glare to motoristswaiting at blocked intersections. R 1150 RT Front Radar Mount Officers can monitor traffic without neck strain. This mount rotates 90 degrees and allows officers to park perpendicular to the roadway. It also permits an easier roadway entrance angle. The unit features a guiding handle to reduce stress on the plug connection. Electronic Locking Shotgun Mount This powder-coated aluminum shotgun mount locks electronically via a hidden button and provides full weapon support with a padded yoke at the receiver. Designed for use with the Remington 870®shotgun that has been fitted with a pistol grip and a 14-, 16- or 18-inch barrel. The mount features adjustable strap for added safety and to secure folding stocks, and it attaches to the rear of the bike via a chrome-plated antenna bracket. Rear Radar Mount The stationary mount protects the