kxf 2011 250 torque

You search Auto repair manual PDF kxf 2011 250 torque, if there are search results will appear below. If search results do not exist, please search by others keyword.



  kxf 2011 250 torque Direct Download speed 5282 Kb/s

  kxf 2011 250 torque Full Version speed 6162 Kb/s



Kawasaki Ninja 250 FAQ

0

Filed Under (Kawasaki) by admin on 15-11-2010

download
Am I too small for this motorcycle? Duke – Sun May 14 17:38:31 2000 I’m only about 5’2″ and don’t have a problem, even though I can only touch the ground with the ends of my toes. Once you get a feel for the balance of the bike it’s not hard to keep everything upright. Only place I have trouble is pushing the bike backwards in a parking lot. Usually I just walk the bike (beside it) to where I can get on and get going. How does the EX500 compare to the EX250? Craig M. – Mon May 22 10:23:29 2000 I have both the EX250 and the EX500; both are Y2K models. The 250 is a screamer that performs well and can easily get me into trouble. My only complaints about the 250 are the excessive nose dive when getting on the front brake hard and the skittishness of the rear during high speed cornering. Both are easily corrected with suspension adjustments, I’ve just been too lazy to get the parts and do the work. A bit more wind protection would be great too. The 500 addresses these problems, the diving of the front end (to a degree); the rear’s skittishness and the wind protection. A plus for the 500 is the greater torque and power off the line; it pulls stronger (in my opinion) and will get you into illegal speed territory just a bit quicker than the 250. With greater weight, is has more stability in high speed and windy situations. Insurance is just about the same for both, with the 250 getting the nod for gas mileage. Service requirements are almost identical for both as well, being that they’re both parallel twins, the technology is the virtually the same. The downfalls of the 500: $2K more than the 250 (can do a lot to the 250 with that kind of money); buzzy mirrors, barely useful; heavier weight to have to push around the garage; lesser gas mileage (55-60 MPG; 250 pushes 70 MPG easily); engine is worse than a nervous dog shaking around at idle and at speed (here the 250 is far superior and much smoother). In my opinion, the 500 is a better suited for a larger rider, from a comfort standpoint. I feel I can stretch out a bit more on it than the 250 (I’m 5′ 9″, 160 lbs). The 250′s brakes are better tuned than the 500 and the shifter is much smoother. That may be due to the 3,500 mile difference between the two bikes. Bottom line, both bikes are great, the 250 is now my wife’s ride (mainly) and the 500′s mine (unless she steals the keys away). In time, I’ll make the adjustments to the 250; she doesn’t push it like I do.

Incoming search terms:

2008 KTM 250 SX-F 250 XC-F, XCF-W 250 EXC-F, EXC-F SIX DAYS INSTALLATION MANUAL

0

Filed Under (KTM) by admin on 22-10-2010

download
Hand brake lever The hand brake lever [1] is mounted on the handlebars on the right and actuates the front wheel brake. The adjusting screw [A] can be used to change the basic position of the hand brake lever (see “Maintenance”). 1 A Short circuit button The short circuit button [2] turns off the engine. When pressing this button, the ignition circuit is short-circuited. 2 Headlamp switch (XCF-W) In this model the headlamp is switched on with the pull switch [5] . 5 Flasher switch The flasher switch is a separate unit and is mounted on the left portion of the handlebar. The wire harness is designed in a way that whenever you want to use your bike off-road, you can dismount the entire turn indicator system without affecting the function of the remaining electrical system. Flasher left Flasher right
OPERATION INSTRUMENTS » ENGLISH 7 1 2 3 4 5 Starter button Pushing the red starter button [1] will actuate the E-starter. Emergency OFF switch (EXC-F Australia) The red emergency-OFF switch [2] is arranged adjacent to the throttle grip. In this position, the E-starter is operational and the engine can be started. In this position, the E-starter and ignition circuits are interrupted.The E-starter cannot be actuated, and the engine will not start, not even if you attempt to start it with the kickstarter. Pushing the black starter button [3] will actuate the E-starter. Indicator lamps The green control lamp [4] flashes in the same rhythm as the flashing indicator when the indicator is working. The blue control lamp [5] lights up when the high beam is on. TEST All of the display segments briefly light up for the display function test. Electronic speedometer The display in the electronic speedometer is activated as soon as you press a button on the speedometer or an impulse is received from the wheel sensor. The display lights up when the engine is running. The display is cleared if no button is pressed for 1 minute or no impulse is received from the wheel sensor. The button is used to change between display modes. The + and – buttons are used to control various functions

Incoming search terms:

APRILIA SPORTCITY 125-200 Technical specifications

0

Filed Under (Aprilia) by admin on 07-11-2010

download
The engine and transmission assembly also acts as swing arm. Suspension is provided by two rear shock absorbers. Spring preload is adjustable for maximum efficiency under all load and road conditions. Rear wheel travel is 80 mm , more than enough to smooth out even the roughest surfaces. The SPORTCITY 250 i.e. is equipped with 15 inch wheels and large, high profile tubeless tyres (120/70 at the front and 130/80 at the rear). Rolling diameter is therefore equivalent to that of a 16 inch tyre but the ability to absorb shocks from rough road surfaces is far better, ensuring a superbly smooth ride. In conjunction with the excellent frame, this intelligent choice of tyres gives the SPORTCITY 250 i.e. excellent stability and the sort of intuitive feel that makes it a piece of cake to ride even for novices . The brakes are another of the strong points of the SPORTCITY 250 i.e. . The new system features triple discs for far shorter stopping distances and far greater active safety. Even inexperienced riders will have no trouble in pulling up well ahead of trouble. At 90 km/h the SPORTCITY 250 i.e. takes just 2.7 seconds to come to a full stop . The front brakes feature two 260 mm discs and floating calipers with two parallel pistons . The rear disc is a 220 mm unit with single piston caliper. Engine technology is another major plus point for the SPORTCITY 250 i.e. Its new electronic fuel injected engine is state of the art on the scooter scene . Powerful, flexible, and extremely low on emissions and consumption, this 250 cc single cylinder unit is perfect for the job in hand. Developing 22.5 HP at 8,000 rpm with 21 Nm of torque at 6,250 rpm, the engine delivers standard-setting performance . It also enables the Sportcity to function as a fun to ride sports scooter not only in town centres but on fast urban ring roads too. And the SPORTCITY 250 i.e. respects the environment wherever it goes, being one of the few scooters to conform to Euro 3 emission control standards. Finally, miserly fuel consumption and a generous 9 litre tank give the SPORTCITY 250 i.e. great autonomy . Engine Horizontal, single cylinder, 4 stroke. Forced liquid cooling with centrifugal pump. 4 valve head with overhead camshaft Fuel Unleaded petrol Bore and stroke 72 x 60 mm Displacement 244,29 cc Compression ratio 11:1 Maximum power 16.5 HP (22.5 kW) at 8,000 rpm Maximum torque 21 Nm at 6,250 rpm Fuel system Electronic fuel injection Ignition Electronic inductive discharge ignition with variable advance Starting Electric Alternator 300 W Lubrication Wet sump. Forced circulation with mechanical pump Gearbox Automatic torque converter Clutch Automatic centrifugal dry clutch Primary drive V belt Final drive Gearbox Frame Open cradle in high tensile strength steel Front suspension Hydraulic telescopic fork with 35 mm stanchions. Wheel travel 100 mm Rear suspension Engine unit acting as swinging arm. Double hydraulic shock absorber with adjustable preload. Wheel travel 80 mm Brakes Front: Twin ∅ 260 mm stainless steel discs. Twin piston floating callipers Rear: ∅ 220 mm stainless steel disc Wheels Light alloy Front: 2.75 x 15″ Rear: 3.00 x 15″ Tyres Tubeless. Front: 120 / 70 x 15″ Rear: 130 / 80 x 15″ Dimensions Maximum length: 1,985 mm Maximum width: 880 mm (at mirrors) Wheelbase: 1,360 mm Seat height; 815 mm Dry weight 148 kg Tank capacity 9 litres (reserve 1.5 litres) Colours Excalibur Grey, Shot Grey, Couture Blue, Moka Black Accessories 28 litre top box, 32 litre top box, 35 litre top box, large windshield, sports windshield, leg cover

Incoming search terms:

KYMCO MAXXER 300/ 250 MONGOOSE 300/ 250 SERVICE MANUAL

0

Filed Under (Kymco) by admin on 26-10-2010

download
apply or add designated greases and lubricants to the specified lubrication points. ÑAfter reassembly, check all parts for proper tightening and operation. ÑWhen two persons work together, pay attention to the mutual working safety. ÑDisconnect the battery negative (-) terminal before operation. ÑWhen using a spanner or other tools, make sure not to damage the motorcycle surface. ÑAfter operation, check all connecting points, fasteners, and lines for proper connection and installation. ÑWhen connecting the battery, the positive (+) terminal must be connected first. ÑAfter connection, apply grease to the battery terminals. ÑTerminal caps shall be installed securely. 1 . GENERAL INFORMATION 1-6 ATV 300/250 ÑIf the fuse is burned out, find the cause and repair it. Replace it with a new one according to the specified capacity. ÑAfter operation, terminal caps shall be installed securely. ÑWhen taking out the connector, the lock on the connector shall be released before operation. ÑHold the connector body when connecting or disconnecting it. ÑDo not pull the connector wire. ÑCheck if any connector terminal is bending, protruding or loose. Confirm Capacity 1 . GENERAL INFORMATION 1-7 ATV 300/250 ÑThe connector shall be inserted completely. ÑIf the double connector has a lock, lock it at the correct position. ÑCheck if there is any loose wire

Incoming search terms:

2008 FLT Police Models Service Manual Supplement

0

Filed Under (Harley Davidson) by admin on 25-11-2010

download
ITEM SERVICED 14-21 ft-lbs (19.0-28.5 Nm) Drain plug torque Engine oil and filter 4 qt. (3.8 L) Oil capacity Hand tighten 1/2-3/4 turn after gasket contact Filter 63798-99A Chrome filter part number 63731-99A Black filter part number FORMULA+ TRANSMISSION AND PRIMARY CHAIN LUBRICATION (Part No. 99851-05) Lubricant type and capacity Primary chain lubricant Wet: 38 oz. (1124 ml) Dry: 45 oz. (1331 ml) 14-21 ft-lbs (19.0-28.5 Nm) Primary chaincase drain plug torque 1/2-1 turn Adjuster screw free play Clutch adjustment 72-120 in-lbs (8.1-13.6 Nm) Adjuster screw locknut torque 1/16-1/8 in. (1.6-3.2 mm) Free play at hand lever 84-108 in-lbs (9.5-12.2 Nm) Clutch inspection cover torque Dipstick at FULL with motorcycle on jiffy stand and filler plug resting on threads. Lubricant level Transmission lubricant FORMULA+ TRANSMISSION AND PRIMARY CHAIN LUBRICATION (Part No. 99851-05) Lubricant type and capacity 32 oz (0.95 liters) 14-21 ft-lbs (19.0-28.5 Nm) Transmission drain plug torque 25-75 in-lbs (2.8-8.5 Nm) Transmission filler plug/dipstick torque Front: 36 psi (248 kPA) Pressure: solo rider Tire pressure and wear Rear: 36-40 psi (248-276 kPA) Replace if less than 1/32 in. (0.8 mm) of tread pattern Wear 55 in-lbs (6.2 Nm) minimum Spoke nipple torque Wheel spokes 99953-99A (12 oz.) D.O.T. 4 hydraulic brake fluid part number Brake fluid level Front: 0.20 in. (5.0 mm) Fluid level (from top of master cylinder reservoir) Rear: 0.26 in. (6.5 mm) Front: 7-10 in-lbs (0.8-1.1 Nm) Master cylinder reservoir cover screw torque Rear: 12-15 in-lbs (1.4-1.7 Nm) 0.016 in. (0.4 mm) Minimum brake pad thickness Brake pads and discs 75-102 in-lbs (8.5.-11.5 Nm) Brake caliper pad pin torque Front: 0.18 in. (4.5 mm) Minimum brake disc thickness Rear: 0.25 in. (6.3 mm) 0.008 in. (0.2 mm) Maximum brake disc lateral runout (warpage) 10 lb. (4.5 kg) Upward force applied at midpoint of bottom belt strand Drive belt deflection 3/8-7/16 in. (9.5-11.1 mm) FLHTP 1/4-5/16 in. (6.4-7.9 mm) FLHP/FLHPE 40-60 in-lbs (4.5-6.8 Nm) Air cleaner cover bracket screw torque Air cleaner 36-60 in-lbs (4.1-6.8 Nm) Air cleaner cover screw torque LOCTITE MEDIUM STRENGTH THREADLOCKER 243 (BLUE) Air cleaner cover screw Threadlocker Part No. 99642-97 (6 ml) LUBIT-8 SUPER OIL, Part No. 94968-85TV (1/4 fl. oz.) Lubricant part number Clutch cable 35-45 in-lbs (4.0-5.1 Nm) Handlebar switch housing screw torque

Incoming search terms:

2006 KTM 250 SX-F 250 EXC RACING 400 EXC RACING 450 SX, XC, EXC RACING 525 SX, XC, EXC RACING, REPAIR MANUAL

0

Filed Under (KTM) by admin on 05-05-2012

download
Hot start lever (250 SX-F) If you pull the red hot start lever [1] during the starting procedure backward, a bore in the carburetor will be opened through which the engine may take in additional air. The result is a „lean” fuel-air mixture of the type needed for hot starts.
ENGLISH 7 OPERATION INSTRUMENTS » Headlamp switch (EXCUSA) In this model the headlamp is switched on with the pull switch [1] . Flasher switch The flasher switch is a separate unit and is mounted on the left portion of the handlebar. The wire harness is designed in a way that whenever you want to use your bike off-road, you can dismount the entire turn indicator system without affecting the function of the remaining electrical system. Flasher left Flasher right Starter button (EXC) Pushing the black starter button [2] will actuate the E-starter. Emergency OFF switch (EXC Australia) The red emergency-OFF switch [3] is arranged adjacent to the throttle grip. In this position, the E-starter is operational and the engine can be started. In this position, the E-starter and ignition circuits are interrupted.The E-starter cannot be actuated, and the engine will not start, not even if you attempt to start it with the kickstarter. Pushing the black starter button [4] will actuate the E-starter. 2 3 4 5 6 Indicator lamps The green control lamp [5] flashes in the same rhythm as the flashing indicator when the indicator is working. The blue control lamp [6] lights up when the high beam is on

Incoming search terms:

2011 HONDA NT700V Specifications/ Press Information

0

Filed Under (Honda) by admin on 18-02-2011

download
Press information for 2011 NT700V 5 Specifications – NT700V (ED-type) ENGINE Type Liquid-cooled 4-stroke 8-valve SOHC 52° V- twin Displacement 680cm 3 Bore  Stroke 81  66mm Compression Ratio 10 : 1 Max. Power Output 48.3kW/8,000min -1 (95/1/EC) Max. Torque 66.2Nm/6,500min -1 (95/1/EC) Idling Speed 1,200min -1 Oil Capacity 3.2 litres FUEL SYSTEM Carburation PGM-FI electronic fuel injection Throttle Bore 40mm Aircleaner Dry, cartridge-type paper filter Fuel Tank Capacity 19.7 litres (including 3.5-litre reserve) Fuel consumption 20.1 km/l (WMTC Mode #) ELECTRICAL SYSTEM Ignition System Digital transistorised with electronic advance Ignition Timing 10° BTDC (idle) ~ 45° BTDC (8,900min -1 ) Sparkplug Type CPR8EA-9 (NGK) Starter Electric Press information for 2011 NT700V 6 Battery Capacity 12V/11.2AH ACG Output 438W Headlight 12V; 55W  1 (low) / 55W  1 (high) DRIVETRAIN Clutch Wet, multiplate with coil springs Clutch Operation Mechanical; cable-actuated Transmission Type 5-speed Primary Reduction 1.763 (67/38) Gear Ratios 1 2.571 (36/14) 2 1.688 (27/16) 3 1.300 (26/20) 4 1.084 (29/27) 5 0.923 (24/26) Final Reduction 3.091 (34/11) Final Drive Enclosed shaft FRAME Type Diamond; steel twin-spar CHASSIS Dimensions (LWH) 2,218  810  1,320mm (Raised windscreen: 1,491mm) Wheelbase 1,476mm Caster Angle 28° 50′ Trail 115mm
Press information for 2011 NT700V 7 Turning Radius 3.2m Seat Height 805mm Ground Clearance 156mm Kerb Weight 254kg (F: 112kg; R: 142kg) *257kg (F: 113kg; R: 144kg) Max. Carrying Capacity 197kg Loaded Weight 451kg *454kg SUSPENSION Type Front 41mm telescopic fork, 115mm axle travel Rear Single damper with adjustable preload, 122.5mm axle travel WHEELS Type Front S-section triple-spoke cast aluminium Rear S-section triple-spoke cast aluminium Rim Size Front 17  MT3.5 Rear 17  MT4.5 Tyre Size Front 120/70 ZR17 (58W) Rear 150/70 ZR17 (69W) Tyre Pressure Front 250kPa Rear 290kPa (290kPa with passenger) BRAKES Type Front 296  4.5mm dual hydraulic disc with Combined 3-piston calipers and sintered metal pads Press information for 2011 NT700V 8 Rear 276  6mm hydraulic disc with dual-piston caliper and sintered metal pads (*and Combined ABS) *Combined-ABS version

Incoming search terms:

2011 HONDA CBF1000/ CBF1000 ABS Specifications

0

Filed Under (Honda) by admin on 18-02-2011

download
Press information for 2011 CBF1000 / CBF1000 ABS 7 Specifications – CBF1000 (ED-type) ENGINE Type Liquid-cooled 4-stroke DOHC inline-4 Displacement 998cm3 Bore  Stroke 75  56.5mm Compression Ratio 11.2 : 1 Max. Power Output 79kW/9,000r/min -1 (95/1/EC) Max. Torque 96Nm/6,500r/min -1 (95/1/EC) Idling Speed 1,200min -1 Oil Capacity 3.6 litres FUEL SYSTEM Carburation PGM-FI Throttle Bore 36mm Aircleaner Dry, cartridge-type paper filter Fuel Tank Capacity 20 litres Fuel Consumption 18,4 km/l (WMTC Mode #) ELECTRICAL SYSTEM Ignition System Computer-controlled digital transistorised with electronic advance
Press information for 2011 CBF1000 / CBF1000 ABS 8 Ignition Timing 5° BTDC (idle) ~ 45° BTDC (7,500min -1 ) Sparkplug Type IMR8C-9HES Starter Electric Battery Capacity 12V/8.6AH ACG Output 350W/5,000 rpm Headlights 12V, 55W  1 (low) / 55W  1 (high) DRIVETRAIN Clutch Wet, multiplate with coil springs Clutch Operation Hydraulic Transmission Type 6-speed Primary Reduction 1.6 Gear Ratios 1 2.6 2 1.83 3 1.5 4 1.32 5 1.17 6 1.07 Final Reduction 2.687 (43/16) Final Drive #530 O-ring sealed chain FRAME Type Mono-backbone; cast aluminium
Press information for 2011 CBF1000 / CBF1000 ABS 9 CHASSIS Dimensions (LWH) 2,210  780  1,220mm Wheelbase 1,495mm Caster Angle 26° Trail 110mm Turning Radius 2.9m Seat Height 795mm ±15mm Ground Clearance 135mm Kerb Weight *245kg (F: 120kg; R: 125kg) Max. Carrying Capacity 195kg Loaded Weight *440kg SUSPENSION Type Front 41mm free valve-type telescopic fork & adjustable spring; 120mm stroke Rear Gas-charged HMAS damper & adjustable spring and rebound; 120mm axle stroke WHEELS Type Front Hollow-section 6-spoke cast aluminium Rear Hollow-section 6-spoke cast aluminium Rim Size Front 17M/C  MT3.5 Rear 17M/C  MT5
Press information for 2011 CBF1000 / CBF1000 ABS 10 Tyre Size Front 120/70 ZR17M/C (58W) Rear 160/60 ZR17M/C (69W) Tyre Pressure Front 250kPa Rear 290kPa (290kPa with passenger) BRAKES Type Front 296  4.5mm dual hydraulic disc with 2- piston calipers, floating rotors, sintered metal pads (*3-piston calipers and Combined ABS) Rear 240  5.0mm hydraulic disc with 1-piston caliper, sintered metal pads (*and Combined ABS) *C-ABS version All specifications are provisional and subject to change without notice

Incoming search terms:

2011 HONDA XL1000V Specifications / Press Information

0

Filed Under (Honda) by admin on 18-02-2011

download
Specifications – XL1000V / XL1000V ABS (ED-type) ENGINE Type Liquid-cooled 4-stroke 8-valve DOHC 90° V- twin Displacement 996cm 3 Bore  Stroke 98  66mm Compression Ratio 9.8 : 1 Max. Power Output 69kW/7,500min -1 (95/1/EC) Max. Torque 98Nm/6,000min -1 (95/1/EC) Idling Speed 1,300min -1 Oil Capacity 4.1 litres FUEL SYSTEM Carburation PGM-FI electronic fuel injection Throttle Bore 42mm Aircleaner Viscous, cartridge-type paper filter Fuel Tank Capacity 25 litres (including 4-litre warning light reserve) ELECTRICAL SYSTEM Ignition System Computer-controlled digital transistorised with electronic advance Ignition Timing 15° BTDC (idle) ~ 55° BTDC (5,100min -1 ) Sparkplug Type IJR8B9 (NGK) Press information for 2011 XL1000V 6 Starter Electric Battery Capacity 12V/18AH ACG Output 434W Headlight 12V 60W  2 (low) / 55W  2 (high) DRIVETRAIN Clutch Wet, multiplate with coil springs Clutch Operation Mechanical; cable-actuated Transmission Type 6-speed Primary Reduction 1.682 (44/74) Gear Ratios 1 2.571 (14/36) 2 1.684 (19/32) 3 1.292 (24/31) 4 1.100 (30/33) 5 0.969 (32/31) 6 0.853 (34/29) Final Reduction 2.938 (16/47) Final Drive O-ring sealed chain FRAME Type Steel tube CHASSIS DIMENSIONS Dimensions (LWH) 2,300  930  1,465mm Wheelbase 1,560mm Caster Angle 27° 30′ Press information for 2011 XL1000V 7 Trail 110mm Turning Radius 2.58m Seat Height 838mm Ground Clearance 181mm Kerb Weight 268.7kg (F: 126.3kg; R: 142.4kg) *276.7kg (F: 130kg; R: 146.7kg) Max. Carrying Capacity 201kg Loaded Weight 469.7 kg *477.7 kg SUSPENSION Front 43mm telescopic fork, 155mm axle travel Rear Pro-Link damper, 145mm axle travel WHEELS Type Front Hollow-section triple-spoke cast aluminium Rear Hollow-section triple-spoke cast aluminium Rim Size Front 19M/C  MT2.50 Rear 17M/C  MT4.00 Tyre Size Front 110/80 R19M/C (59H) Rear 150/70 R17M/C (69H) Tyre Pressure Front 250kPa Rear 250kPa (with passenger: 280kPa) Press information for 2011 XL1000V 8 BRAKES Front 296  4.5mm dual hydraulic disc with Combined 3-piston calipers (*ABS) and sintered metal pads Rear 256  5mm hydraulic disc with Combined 3- piston caliper (*ABS) and sintered metal pads * Combined-ABS version All specifications are provisional and subject to change without notice

2008 KAWASAKI KX 250 F RACING AND EVOLUTION EXHAUST SYSTEM

0

Filed Under (Kawasaki) by admin on 05-11-2010

download
the Akrapovic Racing and Evolution complete exhaust systems are the flagships of our product lines. They are designed for competition-oriented MX riders who demand maximum performance from their exhaust systems. With their production quality, engine performance improvements and modern Hexagonal muffler design they satisfy the requirements of all riders. The systems are designed for two markets; in the US they are available with an approved spark arrester, and for the EU and other non-US markets they come with a noise damper. New for 2008 is additional chamber that helps to reduce noise emission and provides better power and torque at low rpm range. PERFORMANCE Measurements of the Akrapovic EVOLUTION system on the KAWASAKI KX 250 F (with muffler insert): Power & Torque: The Akrapovic Evolution and Racing systems deliver a performance increase throughout nearly the entire rpm range. It is most pronounced in the bottom and the top of the range. The systems deliver increased torque similar to the power increase. Max. increased power of 0.7 HP was measured at 12260 rpm, while max. power of 34.6 HP was measured at 11400 rpm. CONFIGURATION Akrapovic Racing and Evolution systems are of a recognised Hexagonal off-road form. They differ only in terms of the material of the pipe: we use stainless steel for Racing and titanium for Evolution. The header tube is conical, made from stainless steel (Racing) or titanium (Evolution) with additional chamber. It is jointed with a conical SS/titanium link pipe by a sleeve joint, which is secured with a silicon-shielded spring. The link pipe is welded to the muffler. The inlet cap, due to the method of connection with the link pipe, is made from stainless steel (Racing) or titanium (Evolution), same for the internal perforation. The outlet cap is made of carbon-fiber for evolution and composite polymer for Racing system. The outer sleeve of the muffler is available either made from titanium or carbon fiber. The system is attached to the motorcycle with the Akrapovic carbon fiber clamp. The Akrapovic carbon fiber heat shield is also intended for this system. The system comes with a built-in noise damper for the European and other markets, and an approved spark arrester for the American market, which is marked with a laser engraving

Incoming search terms: