machine shop three forks mt mail

You search Auto repair manual PDF machine shop three forks mt mail, if there are search results will appear below. If search results do not exist, please search by others keyword.





SUSPENSION SERVICE TOOLS/ FORK DAMPER ROD BLEED TOOL

0

Filed Under (Tips and Review) by admin on 30-11-2010

download
33 SHOP EQUIPMENT & TOOLS SUSPENSION SERVICE TOOLS K&L FORK TUBE U-BLOCKS Precision machined from billet aluminum, these quality three piece sets are a handy, accurate and safe way to straighten and check fork tubes. 35-9411 36mm (for 33 thru 36mm tubes) 35-9412 40mm (for 37 thru 40mm tubes) 35-9413 43mm (for 41 thru 43mm tubes) 35-9414 46mm (for 44 thru 46mm tubes) 35-1964 35-8579 35-7995 DAMPER ROD HOLDERS Holds damper rod when disassembling forks. 35-8578 Yamaha front forks, 43mm Kayaba YZ125/250 (1988) YZ490 (88-90) 35-8579 Yamaha YZ125/250 with UD(upside down) forks FORK DAMPER ROD TOOLS Sold each. 35-7995 Combination Fork Damper Tool Designed to hold the damper rod during assembly & disassembly of Honda XR400′s or Suzuki DR-Z400S. One end features spanner type prongs for the XR400 and the other a 27mm hex for Suzuki. 35-1964 Combination Damper Rod Fork Tool Designed for assembly and disassembly of most inverted Kayaba and Showa 41mm, 43mm, 46, and 47mm forks. Use one end for Kayaba forks and the other for Showa forks. (not required for 91-92 Honda CR models) ROD HOLDER Double sided damper rod holder. Works on Kayaba U.D (upside down) 41mm forks. 35-8580 Yamaha YZ125/250Amodels (89-90) FRONT FORK CAP SOCKET Designed to remove and install Yamaha front fork caps with female hex head. Sold each. 35-8571 14mm female socket 35-8573 19mm female socket FORK DAMPER ROD HOLDERS Holds damper rod when disassembling and assembling front forks. 35-8576 Use for Yamaha 43mm Kayaba forks, 30mm hex YZ125 (84-87), YZ250 (81-87) IT250 (1983) YZ490 (82-87) 35-8577 Use for Yamaha 38mm Kayaba forks, 24mm hex YZ125 (81-83), IT175 (82-83), IT250 (81-82) YZ250 (77-80), YZ400 (77-79), IT465 (81-82) FORK CAP WRENCH Designed to remove the front fork caps on late model Honda CR’s and Suzuki RM’s. Can also be used for adjusting compression. One end of wrench is 49mm, the other is 50mm. Sold each. 35-7803 Fork Cap Wrench 35-8576 35-8577 35-8571 35-8573 6 Point Hex 35-8578

Incoming search terms:

Aermacchi IHRO1 Machine Specifications

0

Filed Under (Aermacchi) by admin on 13-11-2010

download
1. IHRO 1 caters for single cylinder thoroughbred Grand Prix racing motorcycles constructed during the period 1945-1972 inclusive, for the specific purpose of participation in Grand Prix competition during that era. Maximum capacity for any machine is 500cc, and wherever possible it is intended to run three classes, for machines up to 250cc, 350cc and 500cc. 2. Motorcycles must be presented in original, period condition, with no external updating. Period appearance seats, fuel tanks and fairings (if fitted) must be used. No external changes may be made to the appearance of any machine unless it can be proved that such a change was made in the period. Modern safety fixtures required by some federations and modifications mentioned in this document are not covered by this ruling. 3. No disc brakes are allowed. Drum brakes only may be used. 4. No alloy/magnesium wheels are allowed. Wire wheels only may be used. 5. All machines must have twin shock rear suspension: No monoshocks except Vincent Grey Flash. Suspension units must resemble period components, i.e. no external gas reservoirs etc. 6. All frames and swinging arms must conform exactly to period appearance; no box section swinging arms allowed unless fitted by the manufacturer to that machine in the period. 7. The maximum permitted rim width on either wheel is WM3. 8. No slick tyres, hand cut slicks or modern racing tyres designated by the manufacturer as being exclusively for wet weather use are permitted. Only the following rear tyres may be fitted. Any 19″ tyre. The following 18″ tyres, Dunlop 3.50×18, 3.50/3.25×18 KR124 and KR124A, Avon AM22 110/80×18 Rear Fitment and Avon AM18 120×18 9. Choice of carburettor is free, provided that this is of a period type cylindrical slide model, albeit of a later manufacture. Flat slide instruments are not permitted with the exception of Gardner carburettors. Fuel injection is not permitted except if it can be proved that particular motorcycle ran between 1945-72 with the same type of injection system fitted. A Wal Philips injector is classified under this heading. 10. The type of fuel used must conform to the ACU and FIM’s current fuel regulations for 100LL Avgas at 102 MON. See full specifications below. All machines must finish a race with a minimum of 2 litres of fuel in the tank to allow a sample to be taken for analysis. 11. The use of belt primary drives is encouraged.

Incoming search terms:

8950 and 8960 Series High Performance Tire Changer Operation Manual

0

Filed Under (Tips and Review) by admin on 23-11-2010

download
GENERAL CAUTIONS A. DURING THE USE AND MAINTENANCE OF THE MACHINE IT IS MANDATORY TO COMPLY WITH ALL LAWS AND REGULATIONS FOR ACCIDENT PREVEN- TION. B. THE ELECTRICAL POWER SOURCE MUST HAVE A GROUND CABLE AND THE GROUND CABLE OF THE MACHINE MUST BE CONNECTED TO THE GROUND CABLE OF THE POWER SOURCE. C. BEFORE ANY MAINTENANCE OR REPAIRS ARE ACCOMPLISHED THE MACHINE MUST BE DISCONNECTED FROM THE AIR AND ELECTRICAL SUPPLY. D. NEVER WEAR TIES, CHAINS OR OTHER LOOSE ARTICLES WHEN USING, MAINTAINING OR REPAIRING THE MACHINE. LONG HAIR IS ALSO DANGEROUS AND SHOULD BE KEPT UNDER A HAT. THE USER MUST WEAR PROPER SAFETY ATTIRE – GLOVES, SAFETY SHOES AND GLASSES. 2.0 INSTALLATION Your new JBC 8950 or 8960 Series Tire Changer requires a simple installation procedure requiring only a few moments. Follow these instructions carefully to insure proper and safe operation. The Tire Changer is delivered mounted to a wooden skid. Remove tire changer from its mounts carefully, taking care to avoid any back strain. Place Changer where proper operation will be unobstructed to all sides. Install the machine in a covered and dry place. 2.0.1 Models with SRA attached (8955IN, 8965IN) Once placed in the desired location the tire changer must be bolted to the floor using only the rear two mounting holes. Mounting anchors are provided with those machines with a Safety Restraint Arm. Tire Changer must be anchored to concrete floor if equipped with a “Safety Restraint Arm” BUILDING ELECTRICAL INSTALLATION MUST BE MADE BY A LICENSED ELECTRICIAN. Check that the electrical specifications of the power source are the same of the machine. The machine uses 110v, 60 hz, single phase 20 amp source. Electric specifications are clearly marked on a label at the rear of the machine. FAILURE TO PROVIDE PROPER ELECTRICAL SUPPLY AND GROUNDING WILL CREATE A SHOCK HAZARD TO THE OPERATOR

Incoming search terms:

1945-1957 AJS Pitmans Installaiton Manual

0

Filed Under (AJS) by admin on 31-10-2010

download
AN A.J.S. O.H.V. single is easy to handle, and even the absolute novice quickly acquires confidence in the saddle. Beware, however, that you do not indulge in big throttle openings until you have had ample road experience. Also do not forget to digest the Highway Code. FIG. 1. A FLEXIBLE AND FAST TOURER WITH CLEAN LINES AND MECHANICAL QUIETNESS – THE 1957 MODEL 18S The 500 c.c. A.J.S. model shown is similar to the 350 c.c. model 16MS. Both models have snappy push rod O.H.V. engines with light-alloy cylinder heads, “Monobloc” carburettors, hairpin valve-springs, and automatic-ignition control. Their specification includes: “Teledraulic” front forks, Girling rear-suspension units, a quickly detachable rear wheel, die-cast light-alloy hubs, a deep secondary-chain guard, a new A.M.C. four- speed gearbox, Lucas headlamp, twin pilot-lights, and other attractive features. * The A.J.S. engine and frame numbers required on Form R.F. 1/2 will be found on the near-side of the crankcase and the off-side of the saddle lug, or on the off-side of the front down-tube (later models). THE BOOK OF THE A.J.S. 1 Essential Preliminaries. Before you can legally ride on the road – (1) Insure against all third-party risks and obtain the vital “certificate of insurance.” With a new machine you cannot get this until the machine is licensed, and an insurance “cover note” must be obtained. If you have a valuable machine, you are advised to take out full comprehensive insurance. (2) Obtain the registration licence and registration book (Form R.F.I/2)* or renew the licence (Form R.F. I/A). (3) Obtain a three-monthly “provisional” or an annual driving licence (Form D.L.I).* (4) Fit a reliable speedometer if one is not fitted (not essential if machine registered prior to 1st Oct., 1937). (5) If you carry a pillion-passenger, see that he or she sits astride a proper pillion seat securely fixed to the machine (all “springers” have dualseats), and that the passenger holds a current annual or substantive driving licence for Group G if you are a “learner.” (6) If you are ineligible for an annual or substantive driving licence, attach “L” plates to the front and back of the machine. (7) If not already provided, fit a red reflector (1½ in. minimum diameter) vertically at the rear of the motor-cycle and, on a sidecar outfit, an additional red reflector and rear lamp at the rear of the sidecar and at the same height as those on the motor-cycle. (8) Use an ignition-suppression type sparking plug or terminal cover if the machine was registered for the first time after 1. st July, 1953. All the official forms referred to above may be obtained from any money-order post office. See also footnote **, with reference to Forms R.F, 1/A or R.F. 112. You are not eligible for a substantive driving licence for Group G unless you are 16 and have complied with one of these conditions- (a) You have held a licence (other than a provisional or Visitor’s licence authorizing the driving of vehicles of the class or description applied for within a period of ten years ending on the date of coming into force of the licence applied for. (b) You have passed the prescribed driving test (this includes a test passed while serving in H.M. Forces) during the said period of ten years

Incoming search terms:

DUCATI TITANIUM EXHAUST SYSTEM INSTALLATION MANUAL

0

Filed Under (Ducati) by admin on 26-10-2010

download
BILLET BRAKE RADIAL MOUNTS Moto Corse brake radial mounts are crafted by precision machine tools as shown, the caliper mount is “box” type precision tooled from single ERGAL 7075 solid piece. The result: performance, reduced weight, quality and beauty unmatched by none used extensively in moto gp as standard technology Moto Corse delivers moto gp technology for the ultimate performance. The kit is available for caliper with bolt distance 108mm or 100mm and includes all the parts to assemble it on the bike. 102143002 102143003 102143005 102143006 102143008 102143009 102143011 raDial MOunt Kit FOr OHlins rOaD &tracK Ø 43 FrOnt FOrKs FOr breMbO racing calipers screW Distance 108MM raDial MOunt Kit FOr OHlins rOaD &tracK Ø 43 FrOnt FOrKs FOr breMbO racing calipers screW Distance 108MM raDial MOunt Kit FOr OHlins rOaD &tracK Ø 43 FrOnt FOrKs FOr breMbO street calipers screW Distance 100MM raDial MOunt Kit FOr OHlins rOaD &tracK Ø 43 FrOnt FOrKs FOr breMbO street calipers screW Distance 100MM raDial MOunt Kit FOr sHOWa Ø 43 FrOnt FOrKs FOr breMbO street calipers screW Distance 100MM raDial MOunt Kit FOr sHOWa Ø 43 FrOnt FOrKs FOr breMbO street calipers screW Distance 100MM raDial MOunt Kit FOr sHOWa Ø 43 FrOnt FOrKs FOr breMbO street calipers screW Distance 100MM Ducati 999s/999r/749r Ducati 748r/996sps/996r/998r/998 eF Ducati 748r/996sps/996r/998r/998 eF Ducati 999s/999r/749/r Ducati 749/749s/999 748/998 – MOnster 1000/s4/s2r Ducati MultistraDa 1000D

Incoming search terms:

Yamaha 2005 R1 Bike Tech Sheet

0

Filed Under (Yamaha) by admin on 18-01-2012

download
Engine: Type: Liquid cooled, four stroke, transverse four cylinder, DOHC, 5 valves per cylinder. Displacement: 1000cc Year: 2005 Horsepower: 180hp Clutch: PM Exhaust: Vance & Hines Race Exhaust Mufflers: Vance & Hines Frame: Type: Stock Year: 2005 Swing Arm: Performance Machine Chromoly +4 Extended Shocks: Race Tech Modifications: Race Tech Tuned and Lowered. Forks: Stock lowered 2.5″ Rim: Performance Machine Contrast Cut Torque Size: 19″ X 3.0″ Finish: Contrast Cut Fender: None Tire: Dunlop Sportmax D208ZR 120/70ZR19 Brake: Dual Performance Machine 4 piston Radial Calipers Wheels Rear: Rim: Performance Machine Contrast Cut Torque Size: 18″ X 8.5″ Brake: Performance Machine 4 piston Radial Caliper Finish: Contrast Cut Tire: Dunlop Elite3 250/40/R18 Other Parts: Handlebars: Stock Foot Controls: Over Racing Seat: Stock Turn Signals F/R: Anything Extra? Mirrors: Performance Machine Torque chrome Mirrors 19″ FRONT WHEEL! Paint, Chrome, and other F/X’s: Colors: yellow/Black Type: Special Paint: AirTrix Industries The Painter: Chris Wood Powder Coating: A to Z Coatings

Incoming search terms:

Harley-Davidson Camshaft TC, EVO, Shovelhead, XL EVO, Iron Head, XR Specifications

0

Filed Under (Harley Davidson) by admin on 02-11-2010

download
EVO Black Widow PP8833-2 – 29 55 62 25 264 267 54 103 109 105.8 0.600 0.602 EVO Black Widow PP8826-2 – 27 61 63 29 268 272 56 107 107 107.0 0.602 0.602 EVO Black Widow PP8817-2 – 254 254 0.590 0.590 EVO Carl’s Speed Shop CM4 – 28 44 52 20 252 252 48 98 106 102.0 0.495 0.495 EVO Carl’s Speed Shop CM495F Y 19 47 50 16 246 246 35 104 107 105.5 0.495 0.495 0.179 0.168 EVO Carl’s Speed Shop CM580 – 19 47 50 16 246 246 35 104 107 105.5 0.580 0.580 0.194 0.163 EVO Carl’s Speed Shop CM612 – 36 60 68 28 276 276 64 102 110 106.0 0.612 0.612 0.277 0.235 88 EVO Carl’s Speed Shop CM660 – 38 62 68 28 280 276 66 102 110 106.0 0.660 0.660 0.314 0.277 90 EVO Carl’s Speed Shop CM774 – 284 284 0.784 0.784 0.277 0.236 EVO Carl’s Speed Shop CM780F – 34 70 74 30 284 284 64 108 112 110.0 0.774 0.774 103 EVO Crane EVR0020 – 31 64.5 77 23 275 280 54 107 117 112.0 0.608 0.589 88 EVO Crane Fireball 2000 Y -12 22 20 -10 190 190 -22 107 105 106.0 0.490 0.490 0.026 0.032 EVO Crane Fireball 300 Y 12 34 41 15 226 236 27 101 103 102.0 0.490 0.490 4000 EVO Crane Fireball 310 Y 16 40 43 19 236 242 35 102 102 102.0 0.490 0.490 1500 4500 75 EVO Crane Fireball 316 Y 19 43 48 24 242 252 43 102 102 102.0 0.490 0.490 2000 5000 80 EVO Crane Fireball 326 – 24 48 57 25 252 262 49 102 106 104.0 0.490 0.500 2500 5500 EVO Crane H286 Y 19 43 48 24 242 252 43 102 102 102.0 0.490 0.490 2000 5000 80 EVO Crane H290 – 17 43 45 23 240 248 40 103 101 102.0 0.581 0.581 1800 5200 EVO Crane H296 – 24 48 57 25 252 262 49 102 106 104.0 0.490 0.500 2500 5500 EVO Crane H304 – 24 50 55 25 254 260 49 103 105 104.0 0.600 0.600 2500 5800 EVO Crane H306 – 28 54 69 23 262 272 51 103 113 108.0 0.500 0.510 0.224 0.195 3000 6000 EVO Crane H310 – 23 63 68 28 266 276 51 110 110 110.0 0.550 0.550 0.229 0.229 3000 6500 88 EVO Crane H314 – 26 54 65 21 260 266 47 104 112 108.0 0.600 0.600 2800 6000 EVO Crane HEV0042 – 27 59 71 23 266 274 50 106 114 110.0 0.600 0.576 0.226 0.194 3000 6000 100 116 EVO Crane HEV0067 – 24 50 56 24 254 260 48 103 106 104.5 0.600 0.530 0.128 0.113 EVO Crane HEV0098 – 36 62 72 34 278 286 70 103 109 106.0 0.650 0.650 0.171 0.156 96 EVO CycleRama CR-E550 – 24 52 53 23 256 256 47 104 105 104.5 0.550 0.530 EVO CycleRama CR-E581 – 22 46 53 23 248 256 45 102 105 103.5 0.581 0.550 EVO CycleRama CR-E600A – 24 50 56 24 254 260 48 103 106 104.5 0.600 0.530 EVO CycleRama CR-E600B – 23 51 54 22 254 256 45 104 106 105.0 0.600 0.550 EVO CycleRama CR-E617 – 22 50 50 22 252 252 44 104 104 104.0 0.617 0.617 EVO CycleRama CR-E630 – 18 60 63 13 258 256 31 111 115 113.0 0.630 0.630 EVO CycleRama CR-E660 – 27 59 71 23 266 274 50 106 114 110.0 0.660 0.660 3500 6500 140 EVO Dave Mackie DM500 Y 22 38 52 12 240 244 34 98 110 104.0 0.500 0.500 0.189 0.138 EVO Dave Mackie DM500X Y 25 40 55 20 245 255 45 98 108 102.5 0.500 0.500 0.208 0.178 EVO Dave Mackie DM530 – 28 42 55 15 250 250 43 97 110 103.5 0.530 0.530 0.221 0.141 EVO Dave Mackie DM580 – 26 42 56 12 248 248 38 98 112 105.0 0.580 0.580 0.227 0.144 113 EVO Dave Mackie DM581 – 26 42 56 12 248 248 38 98 112 105.0 0.580 0.580 0.227 0.144 EVO Dave Mackie DM595 – 21 49 57 14 250 251 35 104 112 107.8 0.595 0.595 0.192 0.150 EVO Dave Mackie DM635 – 20 56 59 18 256 257 38 108 111 109.3 0.635 0.635 0.194 0.176 EVO Edlebrock 1740 Y 19 43 48 24 242 252 43 102 102 102.0 0.490 0.490 0.176 0.203 EVO Edlebrock 1741 – 20 46 52 22 246 254 42 103 105 104.0 0.600 0.600 0.183 0.187 EVO Head Quarters HQ-23 – 19 47 52 24 246 256 43 104 104 104.0 0.600 0.530 EVO Head Quarters HQ-24 Y 20 36 52 19 236 251 39 98 107 102.3 0.500 0.500 EVO Head Quarters HQ-25 – 18 38 42 14 236 236 32 100 104 102.0 0.550 0.550 EVO Head Quarters HQ-26 – 20 54 53 22 254 255 42 107 106 106.3 0.600 0.530 89 EVO Head Quarters HQ-27 – 26 60 70 24 266 274 50 107 113 110.0 0.650 0.575

Incoming search terms:

2008 APRILIA RS125 TECHNICAL SPECIFICATIONS

0

Filed Under (Aprilia) by admin on 06-11-2010

download
specified in the ACU regulations. The appearance from both front, rear and profile of machines must (except when otherwise stated) conform to the homologated shape. The appearance of the exhaust system is excluded from this rule. 2. DISPLACEMENT CAPACITY The displacement must remain at 124.9cc and the bore and stroke (54 x 54.5) must remain as originally produced. 3. MINIMUM WEIGHT The minimum weight at post race control must not be less than 102kg , this includes oil and water but excludes fuel. At any time during the event, the weight of the whole machine (including the tank) must not be less than the minimum weight, with a tolerance of 1kg. 4. NUMBER PLATE COLOURS The background colours and figures for Aprilia Superteens are: FRONT Red background with white numbers – Nitro Newcomers Class White background with black numbers – J&S Championship Class REAR White background with black numbers – Both Classes Placed in accordance with the ACU regulations. 5. CARBURATION INSTRUMENTS Carburation instruments must remain as homologated. Carburettor jets and needles may be replaced. No modification, polishing or cutting is allowed. Only the 28mm bodied standard carburettor is permitted. Electronic or mechanical enriching devices must remain installed and active (If the carburettor is changed from one model to another, the appropriate wiring loom must also be installed and be operative). Bell mouths must be as originally produced by the manufacturer for the homologated machine. Throttle must be standard, quick action throttles are not permitted.
6. FUEL All machines must function on normal unleaded fuel with a maximum lead content of 0.005 g/l (unleaded) and a maximum MON of 90 (RON 102 max) and be readily available from roadside service stations nationwide. 7. FRAME BODY AND REAR SUBFRAME Frame must remain as originally produced by the manufacturer. The sides of the frame body may be covered by a protective part made of composite material. Nothing can be added by welding or removed by machining from the frame body. Engine mounting brackets or plates must remain as originally produced by the manufacturer. Rear sub-frame may be replaced by the later type sub-frame to accept new style bodywork on pre-2006 models, this unit must use the original mounting points. Bolt on accessories to the rear sub-frame may be removed. Front fairing bracket may be altered or replaced on pre-2006 models to accept later bodywork. 8. FRONT FORKS Forks structure (spindle, stanchions, bridges, stem etc) must remain as originally produced by the manufacturer. Standard original internal parts of the forks may be modified. After market damper kits or valves may be installed. The fork caps can be modified or changed to add spring preload/compression and damping adjusters. Dust seals can be modified, changed or removed providing the fork remains totally oil sealed. Any quantity or quality of oil can be used in the front forks. The height and position of the front fork in relation to the fork crowns is free. A steering damper may be added but may not act as a steering lock device. 9. REAR FORK (Swing Arm) Every part of the rear fork must remain as originally produced (including rear fork pivot bolt and rear axle adjuster). Rear wheel stand positioning (support) brackets may be added by welding or bolts. Brackets must have rounded edges viewed from all sides. Fastening screws must be recessed. 10. REAR SUSPENSION UNIT

2009 APRILIA RS125 TECHNICAL SPECIFICATIONS

0

Filed Under (Aprilia) by admin on 06-11-2010

download
1. MACHINES Aprilia RS 125 production models, as produced from 01-11-05 and available in the UK via IN Competition from 01-01-06. (any parts exclusive to the older models including the pre-1999 SP model are not permitted to be used on machines in this series). The only eligible models are designated as Euro 2 & Euro 3 New machines are supplied with race kits included through: IN Competition Unit 1 New Lane Burscough Lancs 2. DISPLACEMENT CAPACITY The displacement must remain at 124.9cc and the bore and stroke (54 x 54.5) must remain as originally produced. 3. MINIMUM WEIGHT The minimum weight at post race control must not be less than 102kg , this includes oil and water but excludes fuel. At any time during the event, the weight of the whole machine (including the tank) must not be less than the minimum weight, with a tolerance of 1kg. 4. NUMBER PLATE COLOURS The background colours and figures for Aprilia Superteens are: FRONT RED background with WHITE numbers – Nitro Newcomers Class BLACK background with WHITE numbers – Aprilia Championship Class REAR BLACK background with WHITE numbers – Both Classes Placed in accordance with the ACU regulations. 5. CARBURATION INSTRUMENTS Carburation instruments must remain as homologated. Carburettor jets and needles may be replaced. No modification, polishing or cutting is allowed. Only the 28mm bodied standard carburettor is permitted. Electronic or mechanical enriching devices must remain installed and active (If the carburettor is changed from one model to another, the appropriate wiring loom must also be installed and be operative). Bell mouths must be as originally produced by the manufacturer for the homologated machine. Throttle must be standard, quick action throttles are not permitted.
6. FUEL All machines must function on normal unleaded fuel with a maximum lead content of 0.005 g/l (unleaded) and a maximum MON of 90 (RON 102 max) and be readily available from roadside service stations nationwide. E85 Bio Fuel is also permitted when purchased from normal roadside outlets. 7. FRAME BODY AND REAR SUBFRAME Frame must remain as originally produced by the manufacturer and may not be painted. The sides of the frame body may be covered by a protective part made of composite material of the original frame colour. Nothing can be added by welding or removed by machining from the frame body. Engine mounting brackets or plates must remain as originally produced by the manufacturer. Bolt on accessories to the rear sub-frame may be removed. 8. FRONT FORKS Forks structure (spindle, stanchions, bridges, stem etc) must remain as originally produced by the manufacturer. Standard original internal parts of the forks may be modified. After market damper kits or valves may be installed. The fork caps can be modified or changed to add spring preload/compression and damping adjusters. Dust seals can be modified, changed or removed providing the fork remains totally oil sealed. Any quantity or quality of oil can be used in the front forks. The height and position of the front fork in relation to the fork crowns is free. A steering damper may be added but may not act as a steering lock device. 9. REAR FORK (Swing Arm)

Incoming search terms:

HARLEY-DAVIDSON SPRINGER FORKS MOUNTING INSTRUCTIONS

0

Filed Under (Harley Davidson) by admin on 06-04-2012

download
1. The shock mounts with the body up —shaft pointing down. The nitrogen fill valve can be positioned toward the rear of the motorcycle. 2. Make sure that both halves of the upper and lower bushings are in place. NOTE: Do not try to install the shock with only half of the bushings, as this will lead to poor performance and premature seal leakage. The amount of “float” in the bushing set is necessary to ensure smooth operation of the damper assembly. 3. It is easiest to install the shock when the forks are fully extended, however the shock can be installed with the bike on the kick stand. 4. Insert the body eye into the mounting channel on the fork crown. Rotate the shock down into the lower channel. NOTE: A thread locking compound such as Red Loctite 262 or other similar product should be used on the shock fasteners. 5. Install the upper mounting stud and nuts, finger tight. 6. Push the shaft up far enough to insert the lower mounting stud and nuts. This will take a little effort because of the gas pressure in the shock. 7. Torque the upper and lower shock mount nuts to 22 ft. lb.

Incoming search terms: