my piaggio ciao condenser is weak can replace it with a different a different type of condenser

You search Auto repair manual PDF my piaggio ciao condenser is weak can replace it with a different a different type of condenser, if there are search results will appear below. If search results do not exist, please search by others keyword.



  my piaggio ciao condenser is weak can replace it with a different a different type of condenser Direct Download speed 5282 Kb/s

  my piaggio ciao condenser is weak can replace it with a different a different type of condenser Full Version speed 6162 Kb/s



Lilac LS-18 Motorcycle Maintenance Standards

0

Filed Under (Lilac) by admin on 25-11-2010

download
CYLINDER AND CYLINDER HEAD MAINTENANCE ITEM STANDARD REPAIR LIMIT METHOD REMARKS Cylinder Bore 54 -0.01 54.1 Boring After boring honing should be performed Ovality 0.01 0.05 Boring After boring honing should be performed Taper 0.01 0.05 Boring After boring honing should be performed Oversize 0.25 steps 55 max. Do R and L cylinders at same time / 4 steps Valve Seat Width 0.8 – 1.0 1.3 Adjust Use a cutter Angle 45∞ Combustion Chamber Volume 18.2cc -0.5cc Remove carbon if heavy accumulation Compression Ratio 7.8:1 Head Gasket Thickness 1.0 Cylinder Head Nut Torque 3.0 kg/m (22 ft.-lb.) Out standard Adjust 8mm nut Intake and Exhaust Ports Port Wall SurfaceMust be smooth Remove carbon Intake and Exh. Valve GuidesOD 12 +0.09 +0.1 ID 7 +0.01 -0.0 7.06 Exchange Intake Valve Stem Diameter 7 -0.02 -0.03 6.9 Exchange Head Thickness 1 0.7 Exchange Exhaust Valve Stem Diameter 7 -0.02 -0.03 6.9 Exchange Head Thickness 1 0.7 Exchange Intake and Exhaust Valve Seat Face Width Range 0.8~1.0 1.3 Use valve seat cutter Intake Valve Guide Clearance 0.02~0.04 0.08 Replace valve or guide Exhaust Valve Guide Clearance 0.06~0.08 0.12 Replace valve or guide Valve Spring (Large) Installed Load 10.2 kg 8.7 kg Replace Fitted length 31.5 Free Length 36.5 34.7 Replace Tilt 1.5/100 3/100 Replace Valve Spring (Small) Installed Load 5.48 kg 4.65 kg Replace Fitted length 29.5 Page 4 of 10 Free Length 33.5 31.8 Replace Tilt 1.5/100 3/100 Replace Rocker Arm ID 12 +0.00 +0.02112.07 Replace Rocker Shaft OD 12 -0.06 -0.024 11.92 Replace Arm and Shaft Clearance 0.045~0.006 0.10 Replace arm or shaft Tappet Clearance 0.05 Out standard Adjust Measure cold at TDC Rocker Arm Ball Surface 1.8îR -0.006 -0.024 Replace if severe wear Pushrod Bend 0.1 0.5 Straighten Over 100mm (2) CRANKSHAFT, PISTON AND CONROD MAINTENANCE ITEM STANDARD REPAIR LIMIT METHOD REMARKS Piston OD @ Top 53.65 -0.02 Max Diameter 53.95 -0.015 53.85 Replace Ovality 0.1 Piston and Cylinder Clearance 0.04~0.05 0.15 Replace Piston Ring Groove Clearance 0.03~0.07 0.10 Replace Piston Oversize Step 0.25 4 steps Top Ring and 2nd Ring Thickness 2 -0.01 -0.03 1.92 Replace Width 2.5 -0.01 0.55kg Tension 0.85 – 1.15kg 1 Replace End Gap 0.15 – 0.35 Replace Oil Ring Thickness 3.2 -0.01 -0.03 3.12 Replace Width 2.5 -0.1 Tension 1.0~1.3kg 0.65kg Replace End Gap 0.15~0.35 1 Replace Ring Gap Position 120∞ 3 equal spacesOut standard Adjust Avoid Piston Pin Axis Ring Oversizes 0.25 steps 4 steps Piston Pin OD 15 -0.0 +0.006 14.95 Replace Pin Hole in Piston ID 15 +0.012 -0.015.05 Replace Pin and Piston Clearance -0.006 ~ +0.012 0.06 Replace Hand push fit piston at 100∞C Conrod Small End Bush ID 15+0.027+0.016 15.07 Replace bush Conrod and Piston Pin Clearance 0.01~0.027 0.07 Replace Crankpin OD 24.94 +0.0+0.0124.90 Replace Crankpin Roller OD 5 (+0.001+0.003) Refer to conrod ID Replace 3Sizes; 52 per assembly for selective fit 5 (+0.0 -0.002) 5 (-0.003 -0.005) Conrod ID 34.95+0.03+0.02435.02 Axial Play 0.2~0.4 0.5 Adjust Radial Play 0.026~0.036 0.06 Replace

Incoming search terms:

YAMAHA TW125 SERVICE MANUAL

0

Filed Under (Yamaha) by admin on 19-11-2010

download
Dimensions: Overall length Overall width Overall height Seat height Wheelbase Minimum ground clearance Minimum turning radius 2,140 mm , 810 mm 1,120 mm , 805 mm 1,330 mm , 260 mm 2,100 mm Basic weight: With oil and full fuel tank 125 kg Engine: Engine type Cylinder arrangement Displacement Bore stroke Compression ratio Compression pressure (STD) Starting system Lubrication system: Air-cooled 4-stroke, SOHC Forward-inclined single cylinder 0.124 L (124 cm3) 57.0 48.8 mm 10.0 : 1 1,200 kPa (12.0 kg/cm2, 12.0 bar) at 1,000 r/min Electric starter Wet sump Oil type or grade: Engine oil API standard: “SE” or higher grade ACEA standard: G4 or G5 Periodic oil change With oil filter replacement Total amount 1.0 L 1.1 L 1.3 L Air filter: Wet type element Fuel: Type Fuel tank capacity Fuel reserve capacity Regular unleaded gasoline 7.0 L 1.0 L 2-2 GENERAL SPECIFICATIONS SPEC Model TW125 Carburetor: Type/quantity Manufacturer Y24P/1 TEIKEI Spark plug: Type Manufacturer Spark plug gap DR8EA NGK 0.6 0.7 mm Clutch type: Wet, multiple-disc Transmission: Primary reduction system Primary reduction ratio Secondary reduction system Secondary reduction ratio Transmission type Operation Gear ratio 1st 2nd 3rd 4th 5th Spur gear 74/20 (3.700) Chain drive 50/14 (3.571) Constant mesh 5 speed Left foot operation 36/16 (2.250) 31/21 (1.476) 27/24 (1.125) 25/27 (0.926) 23/29 (0.793) Brake: Front brake type operation Rear brake type operation Single disc brake Right hand operation Drum brake Right foot operation Suspension: Front suspension Rear suspension Telescopic fork Swingarm (Monocross) Shock absorber: Front shock absorber Rear shock absorber Coil spring/Oil damper Coil gas spring/Oil damper Wheel travel: Front wheel travel Rear wheel travel 160 mm 150 mm Electrical: Ignition system Generator system Battery type Battery capacity C.D.I. C.D.I. magneto GM 7CZ-3D 12 V 7 AH Headlight type: Bulb type Bulb wattage quantity:

BMW F 650 GS Repair Manual And Maintenance schedule

0

Filed Under (BMW) by admin on 19-11-2010

download
Replace oil in telescopic forks Check the coolant and restore to correct level if necessary *) Replace the coolant (every 2 years) every 2years Check valve clearances, adjust if necessary Replace the spark plug Drain the outlet hose from the air filter box Replace intake air filter If motorcycle is operated in very dirty or dusty conditions, clean or replace the intake air filter every 10,000 km (6,000 miles); check every 3,000 km (1,800 miles) Replace fuel filter (every 20,000 km/12,000 miles) 20,000 km Check clutch play, adjust if necessary Check wheel spoke tension and tighten if necessary more frequently if motorcycle is ridden in severe off-road conditions Examine brake pads and discs for wear, replace if necessary *) more frequently if motorcycle is ridden in severe off-road conditions Check brake fluid level at front and rear and top up if necessary *) Check for operation of brake system and freedom from leaks; repair/replace if necessary *) Replace the brake fluid at least once a year Replace the primary front/rear brake master cylinder cup (every 40,000 km/24,000 miles on a motorcycle with ABS ) 40,000 km Check wheel bearings and replace if necessary *) Check or, if necessary, replace chain, sprocket, chain guide rollers and pinion *) more frequently if motorcycle is ridden in severe off-road conditions Check chain tension and adjust if necessary *) Check battery acid level, add distilled water if necessary more frequently if motorcycle is ridden in severe off-road conditions Clean and grease the battery terminals, if necessary Check steering head bearings and adjust *) or replace if necessary *) Grease the side and main stands Grease the brake pedal Check bolts and nuts on engine mountings, frame connections, exhaust system mountings, swinging fork pivot, suspension levers, brake pedal, main and side stands and quick-release axles for tightness Final inspection with road safety and functional check

2010 HONDA VFR1200F Dual Clutch Transmission Specifications

0

Filed Under (Honda) by admin on 18-02-2011

download
Specifications VFR1200F Dual Clutch Transmission (ED-type/ F-type) ENGINE Type Liquid-cooled 4-stroke UNICAM 76° V-4 Displacement 1237cc Bore  Stroke 81  60mm Compression Ratio 12:1 Max. Power Output ED: 127kW/10,000min-1 (95/1/EC) F: 83kW/9,500min-1 (95/1/EC) Max. Torque ED: 129Nm/8,750min-1 (95/1/EC) F: 115Nm/4,000min-1 (95/1/EC) Idling Speed 1,150 min-1 Oil Capacity 4.9 litres FUEL SYSTEM Carburation PGM-FI electronic fuel injection Aircleaner Oil-permeated, viscous-type paper filter Fuel Tank Capacity 18.5 litres Fuel Consumption ED/E : 15.9 km/l F : 15.9 km/l (tested in D-Mode) (WMTC mode*) VFR1200F 03/05/10 9 9 ELECTRICAL SYSTEM Ignition System Computer-controlled digital transistorised with electronic advance Ignition Timing 8.4° BTDC (idle speed) Sparkplug Type IMR9E-9HES (NGK); VUH27ES (DENSO) Starter Electric Battery Capacity 12V/11.2Ah (YTZ14S) ACG Output 570W Headlights H7x2 (55Wx2) Tail-light 5Wx2,STOP LIGHT 21W( 21/5W+5Wdual-light) DRIVETRAIN Clutch Wet multi-plate, hydraulic, dual Clutch Operation Hydraulic Transmission Type Constant mesh 6-speed Primary Reduction 1.738 (73/42) Gear Ratios 1 2.4666 (37/15) 2 1.7894 (34/19) 3 1.4090 (31/22) 4 1.1600 (29/25) 5 1.0322 (32/31) 6 0.9393 (31/33) VFR1200F 03/05/10 10 10 Final Reduction 2.7061 Final Drive Shaft FRAME Type Diamond; aluminium twin-spar CHASSIS Dimensions (LWH) 2250  740 1220mm Wheelbase 1,545mm Caster Angle 25.5° Trail 101mm Turning Radius 3.5m Seat Height 815mm Ground Clearance 125mm Kerb Weight 277kg Loaded Weight 473Kg SUSPENSION Type Front 43mm cartridge-type telescopic fork with stepless preload adjustment, 120mm axle travel RearPro-Link with gas-charged damper, VFR1200F 03/05/10 11 11 25-step (*stepless remote-controlled hydraulic) preload and stepless rebound damping adjustment, 130mm axle travel WHEELS Type Front 5-spoke hollow gravity Die-cast aluminium Rear7-spoke gravity Die-cast aluminium Rim Size Front 17M/C  MT3.50 Rear 17M/C  MT6.00 Tyre Size Front 120/70 ZR17M/C (58W) Rear 190/55 ZR17M/C (75W) Tyre Pressure Front 250kPa Rear 290kPa BRAKES Type Front 320mm dual floating hydraulic disc with two 6-piston callipers, C-ABS and sintered metal pads Rear276mm hydraulic disc with 2-piston calliper, C-ABS and sintered metal pads All specifications are provisional and subject to change without notice. * Please note that the figures provided are results obtained by Honda under standardized testing conditions prescribed by WMTC. Tests are conducted on a rolling road using a standard version of the vehicle with only one rider and no additional optional equipment. Actual fuel consumption may vary depending on how you ride, how you maintain your vehicle, weather, road conditions, tire pressure, installation of accessories, cargo, rider and passenger weight, and other factors

OCTOPUS AUTOPILOT DRIVE UNIT – TYPE R – REMOTE MOUNTING SELECTION & INSTALLATION GUIDE

0

Filed Under (Honda) by admin on 12-11-2011

download
The MDR40 type R drive unit is designed around the MORSE 290 Rotary Drive Helm manufactured by TFX- Morse of Limerick Pennsylvania, USA. To meet A.B.Y.C. regulations, this type of steering is recommended for use on vessels with a maximum speed of 40 m.p.h. The MDR40 type R drive should not be fitted to vessels, which exceed this speed. 2. The MDR40 type R drive unit should not be fitted to boats where the maximum horsepower of the engines exceeds the maximum horsepower rating for the vessel as stated on the vessel manufacturers tag. 3. If the existing steering system on the vessel is a NFB (no feed back) type, the MDR40 type R drive can NOT be
fitted. The existing steering system MUST be capable of being back driven. 4. In the event of UNCONTROLLED automatic steering or other EMERGENCY situations, automatic return to
MANUAL steering is provided through the operation of a built in slip clutch. It is STRONGLY advised that the helmsman be formally familiarized with this MANUAL OVERIDE procedure

HARLEY-DAVIDSON Starter Relay Location Guide

0

Filed Under (Harley Davidson) by admin on 18-04-2012

download
Touring 1998 – 2007 Additional Notes: Relay Location: Under Seat in rubber Boot Battery Connection: Under Seat,Visiable Installation Notes: No Access Issues Factory Relay Type: FULL SIZE Factory Relay Part #: 31504-91A Connection Type: Ground Lug to Battery + Terminial System Relay Replacement: R-S-1 Circuit: Cold C Copywrite 2005 Identity Inv. LLC As of: 11.05 ***2004 – 2007 FLHR series bikes & 2007 FLHX require additional Adaptor AD-1 & DGD-1. Start Relay is in Power Distribution box. Replaces H-D Relay part# 31579-04 Softails 2000 – 2007 Additional Notes: 2000 is when the Softails changed to Twin Cams. Relay Location: Under Seat in covered Power Distribution Box. Battery Connection: Under Seat,Visiable Installation Notes: No Access Issues Factory Relay Type: 1/2 SIZE Factory Relay Part #: 31522-00B Connection Type: Ground Lug to Battery + Terminial System Relay Replacement: R-S-3 Circuit: Cold C Copywrite 2005 Identity Inv. LLC As of: 11.05 Softails 1996 – 1999 Additional Notes: Relay Location: Under Seat in covered Power Distribution Box. Battery Connection: Under Seat,Visiable Installation Notes: No Access Issues Factory Relay Type: FULL SIZE Factory Relay Part #: 31504-91A Connection Type: Ground Lug to Battery + Terminial System Relay Replacement: R-S-1 Circuit: Cold C Copywrite 2005 Identity Inv. LLC As of: 11.05
Dyna 2007 Additional Notes: Relay Location: Under Side Panel Cover. Battery Connection: Replace Batt 15A Fuse with Supplied Fuse Holder Installation Notes: No Access Issues Factory Relay Type: 1/2 SIZE Factory Relay Part #: 31522-00B Connection Type: Tap 12v Fuse (Batt 15A) System Relay Replacement: R-S-3 Circuit: Cold C Copywrite 2005 Identity Inv. LLC As of: 11.05 Dyna 2000 – 2005 Additional Notes: Relay Location: Under Side Panel Cover. Battery Connection: Battery connection is made direct to Battery Buss to right of Relay * see Pic3 Installation Notes: Remove Outer Cover, then Remove 4 bolts holding secondary protector plate in place. Relay is on the upper left. Factory Relay Type: 1/2 SIZE Factory Relay Part #: 31522-00B Connection Type: Ground Lug to Battery Buss + Terminial System Relay Replacement: R-S-3 Circuit: Cold C Copywrite 2005 Identity Inv. LLC As of: 11.05 Pic3 Sportster 2004-2007

Incoming search terms:

POLINI X1 GENERAL INFORMATION AND SPECIFICATIONS

0

Filed Under (Polini) by admin on 02-12-2010

download
Air cleaner – Clean and reoil daily or after each moto to prevent motor failure and reduced performance. Transmission oil – change after every race, or at end of riding day. Chain – check tension and lubricate before every ride, adjust or replace as needed. Reoil after riding in damp conditions. Clutch – disassemble and clean clutch assembly frequently, every 2-3 races at least. Inspect kickstarter gears at this time. Ignition cover – remove cover and wipe dry after each ride or after washing bike to remove condensation. Piston rings – replace as often as every 3-5 races with expert rider, less often with less aggressive riders. Piston, pin, rod bearing & circlips – replace as often as every 8-10 races with expert rider, less often with less aggressive riders. Coolant – change yearly, make sure there is at least a 50/50 mixture of antifreeze if freezing temperatures are possible. Steering bearings – Check daily for looseness or play. Adjust and regrease as needed. Swingarm – Check often for looseness. Regrease several times a year. Replace bushings if any play is evident. Sprockets – check for worn or curved teeth each time chain is adjusted. Chain roller& wear pads – check roller for free rotation when checking chain. Make sure roller is not bent or damaged. Check chain wear strips on swingarm and chain guide frequently. Replace as needed to prevent chain from damaging motorcycle. Spokes – Check after each race or after each day of riding for looseness or damage. Wheels & tires – check wheels after each race for dents, cracks or other damage. Check tires for cuts, damage or wear. Check tire pressure daily and adjust for riding conditions. Shock – Check shaft area daily for signs of oil leakage or damage. Check swingarm and shock bushings for looseness. Forks – Check forks daily for leaking oil or damage to tubes. Make sure forks are not twisted check for smooth operation. Spark plug – check sparkplug color and condition after each race or end of riding day. Adjust jetting to keep plug from fouling or overheating. Silencer – If bike seems to be getting louder, replace packing and decarbonize inner tube. Expansion pipe – check daily for large dents, damage or leakage. Remove carbon from headpipe when pipe is removed. Have large dents fixed, or any dents within 8″ of the cylinder. Replace o-rings on pipe as needed to maintain a good seal. Footpegs – check daily for proper operation, pegs should spring back into place. Make sure pegs are not bent or overly dull. Handlebars – check bars after any crash for bending. Look for cracks near bar clamps. Replace bars that have been straightened more than 2 or three times, or if bar is badly bent. Aweakened bar can snap suddenly causing injury to rider. Throttle – check throttle for proper operation each time before bike is started. Remove and clean inside of grip and bar as needed. Grips – check grips daily for wear or looseness. Replace as needed. Use grip glue & safety wire to help hold grips in position. Calipers & pads – check pad wear and caliper function daily or after each race. Replace pads and clean calipers as needed. Brake lever – check lever daily for damage or wear. Make sure lever is at proper angle for both seated and standing positions. Leave lever clamp loose enough to allow clamp to rotate during crash rather than breaking lever. Check and adjust freeplay as needed. Brake pedal – Check pedal daily for damage and proper freeplay. Adjust rear caliper as needed. Reeds – Remove and inspect reed block during every ring change. Check reeds for signs of wear, fraying and cracking. Make sure reeds sit flat and seal well. Replace at any sign of wear or damage or at least once a year, more often for expert riders. Nuts & bolts – Check all nuts and bolts regularly. Make sure to check engine mounting bolts and swingarm bolt frequently

Incoming search terms:

2009 HONDA CBF1000 Specifications/ Press Information

0

Filed Under (Honda) by admin on 18-02-2011

download
Specifications General Model CBF1000 Mold Type ED-type Engine Type Liquid-cooled 4-stroke 16-valve DOHC inline-4 Displacement 998cm³ Bore x Stroke 75 x 56.5mm Compression Ratio 11 : 1 Max. Power Output 72kW / 8,000min-1 (95/1/EC) Max. Torque 93Nm / 6,500min-1 (95/1/EC) Idling Speed 1,200min-1 Oil Capacity 3.6 litres Fuel System Carburation PGM-FI electronic fuel injection Throttle Bore 36mm Aircleaner Dry, cartridge-type paper filter Fuel Tank Capacity 19 litres (including 4-litre reserve) Electrical System Ignition System Computer-controlled digital transistorised with electronic advance Ignition Timing 5° BTDC (idle) ~ 45° BTDC (7,500min-1) Sparkplug Type NGK: CR8EH-9; ND: U24FER9 Starter Electric Battery Capacity 12V / 8.6AH ACG Output 330W Headlights 12V, 55W x 1 (low) / 55W x 2 (high) Drivetrain Clutch Wet, multiplate with coil springs Clutch Operation Hydraulic Transmission 6-speed Primary Reduction 1.604 (77/48) Gear Ratios 1 2.714 (38/14) 2 1.941 (33/17) 3 1.579 (30/19) 4 1.363 (30/22) 5 1.217 (28/23) 6 1.115 (29/26) Final Reduction 2.687 (43/16) Final Drive #530 O-ring sealed chain Frame Type Mono-backbone; rectangular-section steel tube Chassis Dimensions (LxWxH) 2,156 x 781 x 1,138mm Wheelbase 1,480mm Caster Angle 26° Trail 110mm Turning Radius 2.8m Seat Height 795mm (±15mm) Ground Clearance 130mm Kerb Weight 242kg (F: 118kg; R: 124kg), *250kg (F: 120kg; R: 130kg) Max. Carrying Capacity 195kg Loaded Weight 437kg , *445kg Suspension Type Front 41mm cartridge-type telescopic fork, 120mm axle travel Rear Pro-Link with gas-charged HMAS damper, 120mm axle travel Wheels Type FrontHollow-section 6-spoke cast aluminium RearHollow-section 6-spoke cast aluminium Rim Size Front17M/C x MT3.50 Rear17M/C x MT5.00 Tyre Size Front120/70 ZR17M/C (58W) Rear160/60 ZR17M/C (69W) Tyre Pressure Front 250kPa Rear 290kPa Brakes Type Front 296 x 4.5mm dual hydraulic disc with 4-piston (*Combined 3-piston) calipers, floating rotors (*ABS) and sintered metal pads Rear 240 x 6mm hydraulic disc with single-piston (*3-piston) caliper (*ABS) and sintered metal pads

2011 HONDA CBF1000/ CBF1000 ABS Specifications

0

Filed Under (Honda) by admin on 18-02-2011

download
Press information for 2011 CBF1000 / CBF1000 ABS 7 Specifications – CBF1000 (ED-type) ENGINE Type Liquid-cooled 4-stroke DOHC inline-4 Displacement 998cm3 Bore  Stroke 75  56.5mm Compression Ratio 11.2 : 1 Max. Power Output 79kW/9,000r/min -1 (95/1/EC) Max. Torque 96Nm/6,500r/min -1 (95/1/EC) Idling Speed 1,200min -1 Oil Capacity 3.6 litres FUEL SYSTEM Carburation PGM-FI Throttle Bore 36mm Aircleaner Dry, cartridge-type paper filter Fuel Tank Capacity 20 litres Fuel Consumption 18,4 km/l (WMTC Mode #) ELECTRICAL SYSTEM Ignition System Computer-controlled digital transistorised with electronic advance
Press information for 2011 CBF1000 / CBF1000 ABS 8 Ignition Timing 5° BTDC (idle) ~ 45° BTDC (7,500min -1 ) Sparkplug Type IMR8C-9HES Starter Electric Battery Capacity 12V/8.6AH ACG Output 350W/5,000 rpm Headlights 12V, 55W  1 (low) / 55W  1 (high) DRIVETRAIN Clutch Wet, multiplate with coil springs Clutch Operation Hydraulic Transmission Type 6-speed Primary Reduction 1.6 Gear Ratios 1 2.6 2 1.83 3 1.5 4 1.32 5 1.17 6 1.07 Final Reduction 2.687 (43/16) Final Drive #530 O-ring sealed chain FRAME Type Mono-backbone; cast aluminium
Press information for 2011 CBF1000 / CBF1000 ABS 9 CHASSIS Dimensions (LWH) 2,210  780  1,220mm Wheelbase 1,495mm Caster Angle 26° Trail 110mm Turning Radius 2.9m Seat Height 795mm ±15mm Ground Clearance 135mm Kerb Weight *245kg (F: 120kg; R: 125kg) Max. Carrying Capacity 195kg Loaded Weight *440kg SUSPENSION Type Front 41mm free valve-type telescopic fork & adjustable spring; 120mm stroke Rear Gas-charged HMAS damper & adjustable spring and rebound; 120mm axle stroke WHEELS Type Front Hollow-section 6-spoke cast aluminium Rear Hollow-section 6-spoke cast aluminium Rim Size Front 17M/C  MT3.5 Rear 17M/C  MT5
Press information for 2011 CBF1000 / CBF1000 ABS 10 Tyre Size Front 120/70 ZR17M/C (58W) Rear 160/60 ZR17M/C (69W) Tyre Pressure Front 250kPa Rear 290kPa (290kPa with passenger) BRAKES Type Front 296  4.5mm dual hydraulic disc with 2- piston calipers, floating rotors, sintered metal pads (*3-piston calipers and Combined ABS) Rear 240  5.0mm hydraulic disc with 1-piston caliper, sintered metal pads (*and Combined ABS) *C-ABS version All specifications are provisional and subject to change without notice

Incoming search terms:

1996 YAMAHA TDM 850 SERVICE MANUAL

0

Filed Under (Yamaha) by admin on 20-11-2010

download
Model: TDM850 Model code: 4TX2 5AR1 (CH,A) Dimensions: Overall length Overall width Overall height Seat height Wheelbase Minimum ground clearance Minimum turning radius 2,200 mm 790 mm 1,285 mm 805 mm 1,475 mm 165 mm 2,900 mm Radiator: Radiator capacity (including all routes) 1.7 L Tire: Type Size front rear Manufacturer front rear Type front rear Tubeless 110/80 ZR18 150/70 ZR17 BRIDGESTONE*/PIRELLI/MICHELIN BRIDGESTONE*/PIRELLI/MICHELIN BT54F/MTR03/MACADAM 90X BT54R/MTR04/MACADAM 90X *In Austria and Switzerland only Bridgestone tires are equipped on this mode. MAINTENANCE SPECIFICATIONS SPEC ELECTRICAL Item Standard Limit Voltage: 12 V Ignition system: Ignition timing (B.T.D.C.) Advancer type 10 at 1,150 r/min TPS and electrical type Voltage regulator: Type Model /manufacturer No load regulated voltage Semi conductor-short circuit type SH650A-12/SHINDENGEN 14.1 14.9 V Electric fan: Model /manufacturer NAAF20/NIPPONDEN SO CARBURETION CARBURETOR FUEL LEVEL ADJUSTMENT 1. Measure: Fuel level a Fuel level: 15.8 16.8 mm (below the MIKUNI mark) Out of specification Adjust. Adjust the float level by slightly bending the float tang 1. Fuel level measurement and adjustment steps: Place the motorcycle on a level surface. Use a garage jack under the engine to ensure that the carburetors are positioned vertically. Connect the fuel level gauge 2 to the drain pipe. MAINTENANCE SPECIFICATIONS SPEC ELECTRICAL Item Standard Limit Voltage: 12 V Ignition system: Ignition timing (B.T.D.C.) Advancer type 10 at 1,150 r/min TPS and electrical type Voltage regulator: Type Model /manufacturer No load regulated voltage Semi conductor-short circuit type SH650A-12/SHINDENGEN 14.1 14.9 V Electric fan: Model /manufacturer NAAF20/NIPPONDEN SO

Incoming search terms:

Incoming search terms: