non metallic mineral deposit mail

You search Auto repair manual PDF non metallic mineral deposit mail, if there are search results will appear below. If search results do not exist, please search by others keyword.





SUZUKI GSR 600 Accessories

0

Filed Under (Suzuki) by admin on 12-02-2012

download
YBA – Pearl suzuki deep blue no.2 P/N 99000-99074-69N YD8 – Metallic sonic silver P/N 99000-99074-70N YHL – Candy sonoma red P/N 99000-99074-71N YKV – Metallic matt black no.2 P/N 99000-99074-72N YAY – Pearl nebular black P/N 000-99074-73N YMD – Metallic mistic silver P/N 99000-99074-74N YME – Candy max orange P/N 99000-99074-75N YLF – Metallic thunder gray P/N 99000-99074-76N 1 Not in combination with crash pad set (pos. 110) From exhaust to cockpit: the GSR600 is all dressed up 3 102 103 104 106 107 105 102 GSR600 exhaust system by Yoshimura 1 GSR600, model year 2006-2009 P/N 99000-79N12-023 103 Chain guard GSR600, model year 2006-2009 Polished aluminium P/N 990D0-44G10-000 104 Frame covers set GSR600, model year 2006-2009 Carbon look P/N 990D0-44GFC-CRB 105 Tankpad P/N 990D0-44G00-PAD 106 Rear lamp cover GSR600, model year 2006-2009 For original equiped exhaust system P/N 990D0-44G25-PAD For Yoshimura exhaust system P/N 990D0-44G30-PAD 107 Ignition lock cover GSR600, model year 2006-2009 P/N 990D0-44G15-PAD 108 Speedometer cover GSR600, model year 200

Incoming search terms:

HONDA CR250R Owner’s Manual

0

Filed Under (Honda) by admin on 24-04-2011

download
l. CONTROLS( 1 ) Frontbralte tever (2) Throttle grip ( 3 ) Engine stop switch When shutting off engine, press in the  engine stop switch button. (4 ) Rear brake pedal ( 5 I Kickstarter pedal ( 6 } Clutch lever (1′) Fuel tank filler cap ( 8) Gear change pedal The transmission has S speeds. Depress the pedal to Shift into [st gear. Raise the pedal to shift into 2nd, 3rd, 4th and 5th. Neutral is located between 1st and 2nd.  9 ) Fuel mixture enrichment l-mob When starting a cold engne, raise the fuel mixture knob and fully depress the kickstarter pedal. (10) Fuel valve When the fuel valve is turned to "OFF", fuel cannot Flow from the fuel tank to the carburetor. When the fuel valve is turned to “ON”, fuel will flow from the tank to the carburetor. (1 1] Rear shock absorber adjuster The rear shock absorber springs have three settings for precise adjustment of the rear suspension to suit riding conditions and differences in rider weight. Page 6 2 l. OPERATING – Fig. l—2 (1) Fuel tank -  2. FUEL The Honda CRZSUR ELSINORE has a two-stroke engine that requires a gasoline-oil mixture. The capacity of the “fuel tank is 8.59 (2.2 US gal. 1.9 Imp. gal). I Any automotive gasoline with :1 pump octane number of 86 or higher. or research octane number of9i or higher‘ may he used. If “l ofgasoline or a higher octane grade. USE HONDA 2-STROKE INJECTOR OIL OR EQUIVALENT. I Premix gasoline and oil in a ratio of   20:1 Prepare the fuel mixture in a clean container, and shake until thoroughly mixed before Flling the fuel tank. i Too much oil will muse excessive smoking and spark plug fouling. Too little oil will cause engine damage or premature wear. Mix fuel in a ratio of 20 parts gasoline to 1 part oil. I Vegetable oils separate from gasoline more easily than mineral oils, especially in cold weather. It is advisable to use mineral oil when ambient temperatures of below 0°C (32°F) are expected. I If the gasoline-oil mixture is left standing in a container for a long period of time, lubricity will deteriorate. Use the mixture within 24 hours. I Once an oil container is opened, the oil must be used within one month, since oxidation may occur. Do not mix vegetable and mineral oils. Gasoline is flammable and explosive under certain conditions. Always stop the engine and do not smoke or allow open flames or sparks near the motorcycle when refueling

Incoming search terms:

2002 – 2003 Camry A/ C PERFORMANCE & DURABILITY IMPROVEMENT

0

Filed Under (Toyota Manuals) by admin on 28-10-2011

download
Start the engine. B. Inspect the compressor for a metallic rattle sound. a. Check if there is a metallic rattle sound from the compressor when the A/C switch is on. b. If a metallic rattle sound is heard, replace the compressor assembly. Please follow the instructions in the repair manual for compressor removal and replacement: V6 engine: page 55-50 L4 engine: page 55-57 C. Inspect magnetic clutch condition. a. Check the magnetic clutch for signs of overheating. b. If there are signs of overheating, replace the magnetic clutch. 2. Install Air Conditioner Wire. A. Remove instrument panel under cover sub-assembly No. 1, glove compartment door pad, instrument panel sub-assembly lower and heater to foot duct No. 1. B. Remove the cooler thermistor connector from the blower unit.

Harley Davidson V-Rod SUPERCHARGER KIT Installation Manual

0

Filed Under (Harley Davidson) by admin on 24-10-2010

download
Your Sprintex® Supercharger Installation can only be carried out by an Authorised Sprintex® Approved Supercharger Specialist. No unauthorised service or alteration may be undertaken to the Sprintex Supercharger kit or standard motorcycle Specification. Any modification or alterations from the Sprintex or Harley-Davidson specification shall affect your Warranty. 2. FUEL SPECIFICATIONS V ROD® Minimum 95RON Premium Unleaded Fuel 3. SUPERCHARGER BELT AND PULLEY Must be inspected at every routine service and the belt replaced when required. 4. OIL SPECIFICATION (ENGINE ONLY) Harley-Davidson Type Viscosity Harley-Davidson Rating Lowest Ambient Temperature Cold Weather Starts Below 50F (10C) HD Multigrade SAE10W40 HD360 Below 40°F (4°C) Excellent HD Multigrade SAE20W50 HD360 Above 40°F (4°C) Good 5. SPRINTEX V ROD SUPERCHARGER The Sprintex V Rod® Supercharger warranty provides a guarantee against any manufacturing defect during the warranty period, 12 months from the date of purchase or 20,000 Kms, whichever occurs first. The warranty guarantees the replacement of any parts of the Supercharger Installation which fail as a result of a manufacturing defect in normal operating conditions and excludes circuit racing, speed trials, drag racing and any form of motor sport activities. In addition, any unauthorised alteration to the motorcycles original specification or failure to meet the approved service requirements will affect your warranty. 6. EXCLUSIONS The following items will void your Sprintex Warranty: a. Alteration from standard specification b. Unauthorised Service or repair works c. Fitting of non Sprintex approved replacement parts d. Use of non standard air filter e. Installation by any non Approved Sprintex Agent

Incoming search terms:

YAMAHA V-STAR 1300 exhaust system INSTALLATION INSTRUCTIONS

0

Filed Under (Yamaha) by admin on 08-11-2010

download
1. Install the bracket (Stamped 439-P, supplied) to the motorcycle chassis using the 10 x 20mm hex head bolt (supplied) and two of the stock mount bolts in the bottom holes (Figure 3). 2. Remove exhaust system and heat shields from protective packaging and place them on a non-abrasive surface such as a blanket or carpet. Using a non-permanent marker or tape, mark outside edge of each heat shield to show location of mounting clips that the hose clamps will loop through (Figure 4). 3. Apply a small amount of anti-seize compound to the threads of the stock O2 sensor and install it into the header assembly. NOTE: Be careful not to overtighten or get anti-seize compound on the sensor tip as this could damage or affect the sensor function. 4. Carefully lay header assembly into the heat shields and loosely install the hose clamps #20 on head pipe heat shields and #24 on collector heat shield (supplied) by feeding the tail end of the clamp into the heat shield clips. Take note of screw head direction (Figure 5), for adjustment purposes they must be accessible when system is installed. NOTE: Do not tighten the clamps at this time. 5. Using stock dome nuts, carefully install system into exhaust ports. (Assistance may be required). NOTE: Install but do not tighten the exhaust nuts at this time. 6. Remove the muffl er heat shield and baffl e assembly from their protective packaging. Place them on a non-abrasive surface such as a blanket or carpet. 7. Insert the large hose clamp (#56, supplied) into the clip on the muffl er heat shield. 8. Carefully slide the baffl e assembly (without damaging the fi berglass packing) into the muffl er heat shield and align the holes in the heatshield with those in the baffl e. Secure the baffl e with the 1/4-20 x 1/2″ button head screws (supplied) and tighten the hose clamp. 9. Install the 5/16″ x 1 1/4″ hex head bolt, washers and locknut (supplied) in the muffl er clamp (supplied) and slip the clamp over the end of the baffl e tube. 10. Slide nut plate (supplied) inside the bracket welded to backside of baffl e (Figure 6). 11. Install the muffl er assembly onto the collector, making sure it slides forward enough to align the edge of the bracket welded to the baffl e with the edge of the mounting bracket. 12. Attach the muffl er assembly to the mounting bracket using the 5/16″ x 5/8″ fl ange head bolts (supplied). 13. Tighten exhaust port nuts evenly on both cylinders. 14. Tighten the muffl er clamp and the 5/16″ fl ange head bolts, securing the muffl er assembly. 15. Insert the O2 sensor plug back into harness and tuck harness back into its original position. Reinstall the cover. 16. Check alignment of heat shields making sure the ends meet squarely to the collector heat shield. Tighten the hose clamps on all the heat shields when properly aligned. 17. Reinstall right side passenger and rider fl oorboards and tighten the 12mm bolts. 18. Check for adequate clearance between all exhaust system components and motorcycle accessories prone to heat damage. 19. All hardware must be properly tightened and the exhaust pipes thoroughly clean before starting motorcycle

2006 KAWASAKI KX450F Service Manual

0

Filed Under (Kawasaki) by admin on 16-12-2010

download
Tightening Torque Incorrect torque applied to a bolt, nut, or screw may lead to serious damage. Tighten fasteners to the specified torque using a good quality torque wrench. Often, the tightening sequence is followed twice-initial tightening and final tightening with torque wrench. Force Use commonsense during disassembly and assembly, excessive force can cause expensive or hard to repair damage. When necessary, remove screws that have anon -permanent locking agent applied using an impact driver. Use aplastic-faced mallet whenever tapping is necessary. Gasket, O-ring Hardening, shrinkage, or damage of both gaskets andO-rings after disassembly can reduce sealing performance. Remove old gaskets and clean the sealing surfaces thoroughly so that no gasket material or other material remains. Install new gaskets and replace used O-ringswhenre-assembling Liquid Gasket, Non-permanent Locking Agent For applications that require Liquid Gasket ora Non-permanent Locking agent, clean the surfaces so that no oil residue remains before applying liquid gasket or Non-permanent locking agent. Do not apply them excessively. Excessive application can clog oil passages and cause serious damage. Press For items such as bearings or oil seals that must be pressed into place, apply small amount of oil to the contact area. Be sure to maintain proper alignment and use smooth movements when installing

Honda Goldwing GL1800 Solid Rear Axle Trike Conversion Installation Manual

0

Filed Under (Honda) by admin on 16-02-2011

download
Specifications Overall Width: 57.75″ Overall Length: 108″ Overall Length w/EZ-Steer 109.5 Wheel Base: 71″ Extended 4.5″ At Rear Axel Wheel Base w/EZ Steer 72.5″ Load Capacity: 500 Lb Tire Size: 205 / 70 / R15 Wheel Size (15″) Offset +35 mm 15x7JJ 4×4.5 Tire Pressure 20 PSI Suspension: “Zero-Flex” Internal Swing Arm utilizing 3 shocks, OEM shock absorber plus 2 coil over shock absorbers. Rear Differential: Champion Lightweight rear axle / differential assembly. Gear Ratio 2.93:1 gear ratio Brakes: Original front plus 2 high performance disc brakes at rear. Storage Capacity: 6.75 cubic feet. 3 full-face helmets and additional storage. Trike Conversion Installation Kit Honda Goldwing GL1800 Champion Trikes Page 7 of 28 Revision 10 4 Removal of Original Parts Most tasks necessary in this guide can be accomplished with the vehicle on its center stand. Secure the center stand to one of the forward crash bars with a ratchet strap to keep vehicle from rolling forward and off the center stand. Be sure that the vehicle is laterally stable as well. Remove the following from the vehicle. See OEM manual for detailed instructions. Items to be retained for return of deposit or re-installation after modification shall be duly noted. • Seat (to be re-installed without modification) • Left and right side covers (to be re-installed without modification) • Battery and battery box (to be re-installed without modification) • Left and right saddle bags • Remove taillight and locking assemblies from saddlebags (to be returned for refund of deposit) • Trunk (to be re-installed without modification) • Left and right passenger foot rests (to be re-installed without modification) • Left and right foot rest under covers (to be modified and re-installed) • Left and right rear crash bars • Saddle bag trunk stay (to be modified and re-installed) • Left and right mufflers (Mufflers only, do not remove decorative covers) • Rear wheel • Left and right pivot bolt covers (to be re-installed without modification) • Reverse resistor (to be relocated) • Swing Arm – Note : Carry out brake system modifications (Section 5) prior to removing Swing Arm. • Note : Upper bolt of mono shock can be removed without removing the fuel tank. • Note : Do not remove actuator hose from actuator pump or shock absorber. Dismounting shock actuator pump will allow more movement of shock absorber when removing swing arm.Trike Conversion Installation Kit Honda Goldwing GL1800 Champion Trikes Page 8 of 28 Revision 10 5 Brake System Modification Note : Modification to the vehicle brake system should be carried out prior to removal of the swing arm. From the manufacturer, your Honda Gold Wing brake system utilizes both front and rear brakes when the foot brake is applied. In order to insure safe operation of your Gold Wing when converted to a Champion Sidecars Trike, the brake system must be modified to isolate the front and rear brake systems from each other. Once modification is complete, four of the six pistons in the front calipers operate only when the hand brake lever is applied. The rear brakes operate only when the foot brake pedal is applied. The diagrams below outline the difference between the GL1800 OEM brake system and the system as modified by the Champion Sidecars Trike Conversion Kit.

Incoming search terms:

Honda Goldwing GL1800 Independent Rear Suspension Trike Conversion Installation Guide

0

Filed Under (Honda) by admin on 17-02-2011

download
Removal of Original Parts Most tasks necessary in this guide can be accomplished with the vehicle on its center stand. Secure the center stand to one of the forward crash bars with a ratchet strap to keep vehicle from rolling forward and off the center stand. Be sure that the vehicle is laterally stable as well. Remove the following from the vehicle. See OEM manual for detailed instructions. Items to be retained for return of deposit or re-installation after modification shall be duly noted. □ Seat (to be re-installed without modification) □ Left and right side covers (to be re-installed without modification) □ Battery and battery box (to be re-installed without modification) □ Left and right saddle bags □ Remove taillight and locking assemblies from saddlebags (to be returned for refund of deposit) □ Trunk (to be re-installed without modification) □ Left and right passenger foot rests (to be re-installed without modification) □ Left and right foot rest under covers (to be modified and re-installed) □ Left and right rear crash bars □ Saddle bag trunk stay (to be modified and re-installed) □ Left and right mufflers (Mufflers only, do not remove decorative covers) . Retain OEM muffler rubber mounting bushings and flanged spacers for re-installation of the mufflers. □ Rear wheel □ Left and right pivot bolt covers (to be re-installed without modification) □ Reverse resistor (to be relocated) □ Swing Arm and Driveshaft IMPORTANT : Carry out brake system modifications (See Section 5) prior to removing Swing Arm. Evacuating all the brake fluid from the system will prevent brake fluid spills when the OEM swing arm is removed. Note : Upper bolt of mono shock can be removed without removing the fuel tank. □ Rear Shock and Hydraulics. Unscrew angle sensor from OEM shock and secure to frame with cable tie. □ Shock arm and shock link Note : You may need to cut out the bolt that attaches the shock link to the frame

Honda Goldwing GL1800 Independent Rear Suspension Installation Manual

0

Filed Under (Honda) by admin on 16-02-2011

download
Removal of Original Parts Most tasks necessary in this guide can be accomplished with the vehicle on its center stand. Secure the center stand to one of the forward crash bars with a ratchet strap to keep vehicle from rolling forward and off the center stand. Be sure that the vehicle is laterally stable as well. Remove the following from the vehicle. See OEM manual for detailed instructions. Items to be retained for return of deposit or re-installation after modification shall be duly noted. □ Seat (to be re-installed without modification) □ Left and right side covers (to be re-installed without modification) □ Battery and battery box (to be re-installed without modification) □ Left and right saddle bags □ Remove taillight and locking assemblies from saddlebags (to be returned for refund of deposit) □ Trunk (to be re-installed without modification) □ Left and right passenger foot rests (to be re-installed without modification) □ Left and right foot rest under covers (to be modified and re-installed) □ Left and right rear crash bars □ Saddle bag trunk stay (to be modified and re-installed) □ Left and right mufflers (Mufflers only, do not remove decorative covers) . Retain OEM muffler rubber mounting bushings and flanged spacers for re-installation of the mufflers. □ Rear wheel □ Left and right pivot bolt covers (to be re-installed without modification) □ Reverse resistor (to be relocated) □ Swing Arm and Driveshaft IMPORTANT : Carry out brake system modifications (See Section 5) prior to removing Swing Arm. Evacuating all the brake fluid from the system will prevent brake fluid spills when the OEM swing arm is removed. Note : Upper bolt of mono shock can be removed without removing the fuel tank. □ Rear Shock and Hydraulics. Unscrew angle sensor from OEM shock and secure to frame with cable tie. □ Shock arm and shock link Note : You may need to cut out the bolt that attaches the shock link to the frame Brake System Modification Note : Modification to the vehicle brake system should be carried out prior to removal of the swing arm . 5.1 Explanation of OEM brake system and changes From the manufacturer, your Honda Gold Wing brake system utilizes both front and rear brakes when the foot brake is applied. In order to insure safe operation of your Gold Wing when converted to a Champion Trike, the brake system must be modified to isolate the front and rear brake systems from each other. Once modification is complete, four of the six pistons in the front calipers operate only when the hand brake lever is applied. The rear brakes operate only when the foot brake pedal is applied. The diagrams below outline the difference between the GL1800 OEM brake system and the system as modified by the Champion Trike Conversion Kit.

1990 TOYOTA PAINT CODES AND REFINISH FORMULA CODES

0

Filed Under (Toyota Manuals) by admin on 20-10-2011

download
Attached for your reference is a listing of all 1990 paint codes and refinish paint codes for five refinish paint manufacturers – BASF, DuPont, PPG Industries, Sherwin Williams and Sikkens. Please Note: All colors listed in bold are new for 1990. Colors listed as Pearl or Metallic (M) have a clearcoat top coat finish. Colors 042 (Pearl White), 049 (Pearl White) and 051 (Diamond White Pearl) are tricoats (three stage paints), consisting of a base color coat, pearl (mica) coat and a clearcoat. Sikkens paint formulas are not separately listed in this bulletin since their paint codes simply add the characters “TOY” to our color codes in their literature. For example: Toyota color code 8D8 (Light Blue Metallic) is identified by Sikkens as “TOY 8D8.” PLEASE CONTACT YOUR LOCAL PAINT REPRESENTATIVE FOR THE ACTUAL PAINT MIXING FORMULAS OR FOR ADDITIONAL ASSISTANCE FOR COLOR MATCHING

Incoming search terms: