reset trip meter on aprilia shiver

You search Auto repair manual PDF reset trip meter on aprilia shiver, if there are search results will appear below. If search results do not exist, please search by others keyword.



  reset trip meter on aprilia shiver Direct Download speed 5282 Kb/s

  reset trip meter on aprilia shiver Full Version speed 6162 Kb/s



YAMAHA XV1700 PCR/ XV1700 PCRC OWNER'S MANUAL

0

Filed Under (Yamaha) by admin on 02-12-2010

download
High beam indicator light “” 2. Right turn signal indicator light “” 3. Fuel level warning light “” 4. Engine trouble warning light “” 5. Left turn signal indicator light “” 6. Neutral indicator light “” 1. Speedometer INSTRUMENT AND CONTROL FUNCTIONS 3-4 3 EAU04436 Tachometer unit The electric tachometer allows the rider to monitor the engine speed and keep it within the ideal power range. The tachometer unit is equipped with the following: ● an odometer (which shows the total distance traveled) ● two tripmeters (which show the distance traveled since they were last set to zero) ● a fuel reserve tripmeter (which shows the distance traveled since the fuel level warning light came on) ● a meter lighting control ● a clock ● a self diagnosis device NOTE: ● Be sure to turn the key to “ON” before using the “SELECT” and “RESET” buttons. ● To switch the odometer, the trip- meters and the fuel reserve trip- meter displays between kilometers and miles, press the “SELECT” button for at least two seconds. ECA00123 CAUTION: Do not operate the engine in the tachometer red zone. If operated in the red zone, the tachometer segments will start flashing to notify the rider. Red zone: 5,000 r/min and above 1. Tachometer 2. Clock 3. Odometer/tripmeter/fuel reserve tripmeter 4. “RESET” button 5. “SELECT” button 1. Tachometer red zone
INSTRUMENT AND CONTROL FUNCTIONS 3-5 3 Odometer and tripmeter modes Pushing the “SELECT” button switches the display between the odometer mode”ODO” and the tripmeter modes “TRIP 1″ and “TRIP 2″ in the following order: ODO→ TRIP 1 → TRIP 2 → ODO If the fuel level warning light comes on (see page 3-2), the odometer display will automatically change to the fuel reserve tripmeter mode “TRIP F” and start counting the distance traveled from that point. In that case, pushing the “SELECT” button switches the display between the various tripmeter and odometer modes in the following order: TRIP F → TRIP 1 → TRIP 2 → ODO → TRIP F To reset a tripmeter, select it by pushing the “SELECT” button, and then push the “RESET” button for at least one second. If you do not reset the fuel reserve tripmeter manually, it will reset itself automatically and the display will return to the prior mode after refueling and traveling 3mi (5km). Meter lighting control mode 1. Turn the key to “OFF”. 2. Push and hold the “SELECT” but- ton. 3. Turn the key to “ON”, and then after five seconds, release the “SELECT” button. 4. Push the “RESET” button to select the desired brightness. 5. Push the “SELECT” button to set the brightness level. 6. Turn the key to “OFF”. NOTE: When adjusting the meter lighting, the odometer display will indicate the brightness level. Clock mode To set the clock: 1. Push the “SELECT” button and “RESET” button together for at least two seconds. 2. When the hour digits start flashing, push the “RESET” button to set the hours. 3. Push the “SELECT” button, and the minute digits will start flashing. 4. Push the “RESET” button to set the minutes. 5. Push the “SELECT” button and then release it to start the clock. NOTE: ● After setting the clock, be sure to push the “SELECT” button before turning the key to “OFF”, otherwise the clock will not be set. ● To set the clock after the battery has been disconnected, first set the time to 1:00 AM, and then set the clock to the correct time

Incoming search terms:

Triumph T595 Daytona and T509 Speed Triple Specifications

0

Filed Under (Triumph) by admin on 06-11-2010

download
1. Tachometer 8. Turn Indicator light 2. Tachometer ‘Red Zone’ 9. Low Oil Pressure Warning Light 3. Speedometer 10. High Beam Indicator Light 4. Odometer 11. Neutral Indicator Light 5. Trip Meter 12. Low Fuel Level Indicator Light 6. Trip Meter Reset Knob 13. Engine Management Malfunction 7. Coolant Temperature Gauge Indicator Light SPEEDOMETER The speedometer indicates the road speed of the motorcycle. In the speedometer face are the odometer and trip meter. The odometer shows the total distance that the motorcycle has travelled. The trip meter shows the distance travelled since the meter was last reset to zero. The trip meter can be reset to zero by rotating the reset knob situated on the left hand side of the speedometer. TACHOMETER The tachometer shows the engine speed in revolutions per minute – rpm (r/min). On the right side of the tachometer face is the ‘red zone’. Engine rpm (r/min) in the red zone is above maximum recommended engine speed and is also above the range for best performance. / f&it. ::;:%M,to %:th:’z zone as severe engme damage may NOTE The ‘Red Zone’ position for Daytona is different to that on the Speed Triple. Page 16
General Information COOLANT TEMPERATURE GAUGE The coolant temperature gauge indicates the temperature of the engine coolant. On the right -hand side of the gauge face is the ‘red zone. If the temperature gauge needle moves into the ‘red zone’ this indicates that the engine is overheating. needle enters the ‘red zone’ as severe WARNING LIGHTS I a0 INDICATORS When the indicator switch is turned to left or right, the corresponding direction indicator light flashes on and off. cl ~ LOW OIL PRESSURE: The low oil pressure warning light becomes illuminated whenever the oil pressure is dangerously low (or the ignition switch is in the ‘ON’ position with the engine not running). When the engine is running, the light will remain off when sufficient oil pressure is present. When starting the motorcycle, check that the light comes on when the ignition is in the ‘ON’ position, but goes out as soon as the engine starts A! CAUTION: Stop the engine immediately if the low oil pressure warning light comes on during normal operation. Do not restart the engine until the fault has been rectified. Severe engine damage will result from running the engine when the oil warning light is illuminated. HIGH BEAM: When the headlights are switched on and the headlight dip switch is set to ‘high beam’, the high beam warning light will illuminate. IElI NEUTRAL: The neutral warning light indicates when the transmission is in neutral (no gear selected). The warning light will illuminate when the transmission is in neutral with ignition switch in the ‘ON’ position. ml LOW FUEL: The low fuel indicator will illuminate when there are approximately 3.7 litres of fuel remaining in the tank. Et3 ENGINE MANAGEMENT SYSTEM MALFUNCTION INDICATOR LIGHT: The malfunction indicator light for the engine management system illuminates when the ignition is switched on, remains illuminated during starting, and goes out shortly after the engine starts. If the malfunction indicator light becomes illuminated during riding, a fault has occurred in the engine management system. In this case the system will switch to ‘limp-home’ mode so that riding may continue. Contact an authorised Triumph dealer as soon as possible to have the fault checked out and rectified

Incoming search terms:

2003 4Runner And Land Cruiser, 2004 Sienna SERVICE MAINTENANCE REMINDER LIGHT RESET PROCEDURE

0

Filed Under (Toyota Manuals) by admin on 26-10-2011

download
should be used to reset the light when the oil has been changed. 2003 model year 4Runner and Land Cruiser vehicles. 2004 model year Sienna vehicles. To reset the Service Maintenance Reminder Light: 1. Turn the ignition switch to the “ON” position. 2. Set the Odometer / Trip Display to the “ODO” mode. 3. Turn the ignition switch to the “OFF” position. 4. Depress and hold the Trip Meter “RESET” button while turning the ignition switch to the “ON” position. 5. The Service Maintenance Reminder Light will: a. Illuminate solidly for 3 seconds. b. Blink for 2 seconds. c. Illuminate solidly for 1 second. d. Turn off. 6. Release the Trip Meter “RESET” button. 7. Turn the ignition to the “OFF” position. 8. Turn the ignition to the “ON” position, and confirm that the Service Maintenance Reminder Light goes out

Incoming search terms:

Aprilia Shiver GT ABS Technical Specifications

0

Filed Under (Aprilia) by admin on 06-11-2010

download
Technical Specifications Aprilia Shiver GT ABS Engine type Aprilia V90 four-stroke longitudinal 90° V-twin engine, liquid cooled, double overhead camshafts with mixed gear/chain timing system, four valves per cylinder. Tri-Map Ride-by- Wire system Fuel Unleaded Bore and stroke 92 x 56.4 mm Total engine capacity 749.9 cc Compression ratio 11: 1 Maximum power at crankshaft 95 hp at 9,000 rpm Maximum torque at crankshaft 8.25 kgm at 7,000 rpm Induction and fuel system Integrated engine management system. Injection system with Ride by Wire throttle opening system and Tri-Map mapping selection Ignition Digital electronic ignition integrated with injection system. Starter Electric Exhaust system 2 into 1 exhaust system in 100% stainless steel with three-way catalytic converter and oxygen sensor Alternator 450 W at 6,000 rpm Lubrication Wet sump. Clutch Hydraulically operated multiplate wet clutch Primary drive Straight cut gears, drive ratio: 60/31 (1.75) Secondary drive Chain. Drive ratio: 16/44 Chassis Detachable steel frame linked with high resistant bolts and side aluminum plates. Removable rear sub frame. Front suspension Upside-down fork, stanchions ∅ 43. wheel travel 120 mm. Rear suspension Aluminum alloy swing arm; with swing arm stiffener brace. Hydraulic shock absorber with adjustable rebound and preload. Wheel travel 130 mm Brakes Front: Dual ∅ 320 mm diam. stainless steel floating discs. Radial calipers with four pistons. Metal braided brake pipe. Rear: ∅ 240 mm stainless steel disc. Single piston caliper. Metal braided brake pipe. Two-channel Continental ABS system Tyres Tubeless. Front: 120/70 ZR 17 Rear: 180/55 ZR 17 Dimensions Max Length: 2,265 mm Max Width: 800 mm Max height: 1,210 mm Tank 16 Litres

ACE -325X/ 395 X-XX CLOCK, UNIT, WHEEL, ODOMETER, TEMPERATURE & FUEL METER SETTING

0

Filed Under (Honda) by admin on 24-12-2011

download
Setup operations include 12/24hour clock, bar tachometer scale, shift warning RPM, numbers of engine rotation per signal, wheel circumference, units, odometer adjustment, units of temperature, temperature warning and fuel meter input resistance selection. These must be set up step by step. The computer will automatic reversion to main screen if no button operation for 75 seconds at any setting screen. 2. Press both MODE & RESET buttons to go into setting screen. In setting screens, press RESET button to add the flashing digit by 1 or convert units, press MODE button to confirm the digit setting and jump to next digit or next setting screen to be set. Press MODE button for 2 seconds at any setting screen to finish the setting and go to main screen. 3. It displays “12 or 24H and XX:XX-XX” symbols and AM/PM in case you select 12H. Operates buttons as descriptions of item 2 to finish clock and jump to 8,000/16,000rpm scale setting. 4. It displays 8,000rpm scale, presess RESET button to convert 8,000 or 16,000rpm. Press MODE button to confirm the setting and jump to shift RPM warning setting. 5. It displays ” RPM rXXX00 “. Follow the item 2 of button operation to finish the shift RPM warning setting and jump to engine specification setting. 6. It displays “SPC-X.X RPM”, the default value is 1.0; there are 4 options: 1.0, 2.0, 3.0 and 0.5. It means the numbers of engine rotation per signal. For example the value 2.0 means the engine rotate 2 turns to output a signal. 7. Press RESET button to move in loop sequence from one to another value of the 4 values. Press MODE button to confirm the setting and go to wheel circumference setting screen. 8. In “cXXXX” display, “c” means “Circumference”, following 4 default digits; flashing digit is digit to be set. Follow the item 2 of button operation to finish the wheel circumference setting and jump to unit setting. 9. It displays KM/h or MPH, each press of RESET button converts unit; press MODE button to confirm unit setting and jump to odometer setting. 10. It displays “ODO & 00000Xkm”, the “X” is tested odometer in factory, follow item 2 to setting a desired odometer and jump to thermometer unit setting. The setting screen will disappear when the odometer is over 30km or your setting is over 30km and returned to main screen. 11. It displaysm ” , or oFF”, each press of RESET button converts , or oFF; press MODE button to confirm temperature setting and jump to temperature warning setting. 12. It displays ” XXX” and the selected unit. Follow the item 2 of button operation to finish the temperature warning setting and go to fuel sensor input resistance setting. 13. It displays “100r and fuel tank symbol”, follow the item 2 to select 100, 250, 510 Ohm or oFF and return to the main screen. The fuel meter bar will disappear if you select oFF mode.

Incoming search terms:

2010 APRILIA Shiver Technical Specifications

0

Filed Under (Aprilia) by admin on 06-11-2010

download
Engine type Aprilia V90 four-stroke longitudinal 90° V-twin engine, liquid cooled, double overhead camshaft with mixed gear/chain timing system, four valves per cylinder. Fuel Unleaded petrol Bore and stroke 92 x 56.4 mm Total engine capacity 749.9 cc Compression ratio 11: 1 Maximum power at crankshaft 95 hp at 9,000 rpm Maximum torque at crankshaft 8.25 kgm at 7,000 rpm Fuel system Ride by Wire integrated engine control system. Ignition Digital electronic ignition integrated with injection system. Starting Electric Exhaust system 2 into 1 exhaust system in 100% stainless steel with three-way catalytic converter and lambda probe Alternator 450 W at 6,000 rpm Lubrication Wet sump Gearbox 6 speeds, drive ratio: 1st 36/14 (2.57) 2nd 32/17 (1.88) 3rd 30/20 (1.5) 4th 28/22 (1.27) 5th 23/26 (0.88) 6th 24/25 (0.96) Clutch Multiple discs in oil bath, hydraulically operated Primary drive Straight cut gears, drive ratio: 60/31 (1.75) Secondary drive Chain. Drive ratio: 16/44 Chassis Modular tubular steel frame fastened to aluminium side plates by high strength bolts. Removable rear subframe. Front suspension Upside down fork with * 43 stanchions. Wheel travel 120 mm. Rear suspension Aluminium alloy swingarm; with swingarm stiffener brace. Hydraulic shock absorber with adjustable rebound and preload. Wheel travel 130 mm. Brakes Front: Dual * 320 mm diam. wave stainless steel floating disc. Radial callipers with four pistons. Metal braided brake pipe. 2-channel Continental ABS system Rear: Stainless steel disc * 245 mm. Single piston calliper. Metal braided brake pipe. Wheel rims Aluminium alloy Front: 3.50 X 17″ Rear: 6.00 x 17″ Tyres Radial tubeless tyres; front: 120/70 ZR 17 rear: 180/55 ZR 17 Dimensions Max. length 2,265 mm Max. width 810 mm (at handlebar) Max. height 1,135 mm (at instrument panel) Saddle height 800 mm Centre to centre distance 1,440 mm Trail 109 mm Steering angle 25.7° Tank 15 lt

Incoming search terms:

APRILIA SL 750 SHIVER Technical Specifications

0

Filed Under (Aprilia) by admin on 06-11-2010

download
Engine Aprilia V90 Four stroke longitudinal 90° V twin. Liquid cooling. Double overhead camshaft with mixed gear/chain drive; four valves per cylinder. Fuel Unleaded petrol. Bore x stroke 92 x 56.4 mm Total displacement 749.9 cc Compression ratio 11 : 1 Maximum power at the crank 95 HP at 9000 rpm. Maximum torque at the crank 8.25 kgm at 7000 rpm. Fuel system Integrated engine management system. Injection with Ride by Wire technology control of the throttle bodies Ignition Digital electronic, integrated with the injection, two spark plugs per cylinder Starting Electric Exhaust Two in one system in 100% stainless steel with three-way catalytic converter and Lambda probe Generator 450 W at 6000 rpm. Lubrication Wet sump Gearbox six speed, transmission ratio: 1° 36/14 (2.57) 2° 32/17 (1.88) 3° 30/20 (1.5) 4° 28/22 (1.27) 5° 23/26 (0.88) 6° 24/25 (0.96) Clutch Multi-plate in oil bath, cable operated. Primary drive Spur gears, transmission ratio: 60/31 (1.75) Final drive Chain Transmission ratio: 16/44 Frame Dismountable steel trellis connected with high strength bolts to aluminium side plates. Dismountable rear frame. Front suspension 43 mm upside-down fork. 120 mm wheel travel Rear suspension Aluminium alloy swingarm with reinforcement truss. Hydraulic shock absorber adjustable in spring preload and rebound damping. Wheel travel: 130 mm. Brakes Front: Double stainless steel floating disc (Ø 320 mm ). Four piston radial calipers. Metal braided brake line. Rear: Steel disk (∅ 245 mm) with twin piston caliper. Metal braided brake line. Wheels In aluminium alloy Front: 3.50 X 17″ Rear: 6.00 X 17″ Tyres Radial tubeless; front: 120/70 ZR 17 rear: 180/55 ZR 17 Dimensions Overall length 2066 mm Overall width: 815 mm (at handlebars) Overall height: 1132 mm Seat height: 810 mm Wheelbase: 1449 mm Trail: 109 mm Rake angle: 25.7° Dry weight 189 kg Tank capacity 15 lt

Incoming search terms:

Aprilia Shiver 750 Sport Technical Specifications

0

Filed Under (Aprilia) by admin on 06-11-2010

download
Engine Type Aprilia V90 four-stroke longitudinal 90° V-twin engine, liquid cooled, double overhead camshaft with mixed gear/chain timing system, four valves per cylinder. Capacity 749.9 cc Bore and stroke 92 x 56.4 mm Compression ratio 11 : 1 Maximum power at crank 95 HP at 9000 rpm. Max Torque at crank 8.25 kgm at 7000 rpm. Fuel supply Ignition Integrated engine management system. Injection with Ride by Wire technology control of the throttle bodies. Digital electronic, integrated with the injection. Exhaust system Two in one system in 100% stainless steel with three-way catalytic converter and Lambda probe. Clutch Multi-plate in oil bath. Hydraulically operated. Lubrication Wet sump Frame Modular tubular steel frame fastened to aluminium side plates by high strength bolts. Removable rear subframe. Front suspension 43 mm upside-down fork. 120 mm wheel travel. Rear suspension Aluminium alloy swingarm with swingarm stiffener brace. Hydraulic shock absorber adjustable in spring preload and rebound damping. Wheel travel: 130 mm. Front brakes Wave stainless steel floating disc (Ø 320 mm). Four piston radial callipers. Metal braided brake line. Rear brake Wave Stainless steel disc (∅ 240 mm) with single piston calliper. Metal braided brake line. Wheels Aluminium alloy Front : 3.50 X 17″ Rear : 5.50 X 17″ Length 2265 mm Width 800 mm (at handlebars) Height Tank Capacity 1135 mm (at instruments) 15 Litres

Yamaha YZF-R6 SPECIFICATION AND OWNER'S MANUAL

0

Filed Under (Yamaha) by admin on 19-11-2010

download
Shift timing indicator light This indicator light can be set to come on and go off at the desired engine speeds and is used to inform the rider when it is time to shift to the next higher gear. The electrical circuit of the indicator light can be checked by turning the key to “ON”. If the indicator light does not come on for a few seconds, then go off, have a Yamaha dealer check the electrical circuit. (See pages 3-7-3-10 for a detailed explanation of the function of this indicator light and on how to set it.) EAU04923* Coolant temperature warning light “” This warning light comes on when the engine overheats. When this occurs, stop the engine immediately and allow the engine to cool. The electrical circuit of the warning light can be checked by turning the key to “ON”. If the warning light does not come on for a few seconds, then go off, have a Yamaha dealer check the electrical cir- cuit. Multi-function display The multi-function display is equipped with the following: a speedometer (which shows the riding speed) an odometer (which shows the total distance traveled) two tripmeters (which show the distance traveled since they were last set to zero) a fuel reserve tripmeter (which shows the distance traveled since the fuel level warning light came on) a clock a self-diagnosis device a display brightness and shift timing indicator light control mode NOTE: Be sure to turn the key to “ON” before using the “SELECT” and “RESET” buttons. To switch the speedometer and odometer/tripmeter displays between kilometers and miles, press the “SELECT” button and “RESET” button together for at least two seconds. Odometer and tripmeter modes Pushing the “SELECT” button switches the display between the odometer mode “ODO” and the tripmeter modes “TRIP 1″ and “TRIP 2″ in the following order: ODO → TRIP 1 → TRIP 2 → ODO If the fuel level warning light comes on (see page 3-2), the odometer display will automatically change to the fuel reserve tripmeter mode “F-TRIP” and start counting the distance traveled from that point. In that case, pushing the “SELECT” button switches the display between the various tripmeter and odometer modes in the following order: F-TRIP → TRIP 1 → TRIP 2 → ODO → F-TRIP

YAMAHA RX10H/ RX10SH RX10MH/ RX10MSH/ RX10RH/ RX10RSH SERVICE AND OWNER’S MANUAL

0

Filed Under (Yamaha) by admin on 27-04-2011

download
Throttle override system (T.O.R.S.) If the carburetor or throttle cable should malfunction during operation, the T.O.R.S. will operate when the throttle lever is released. The T.O.R.S. is designed to interrupt the ignition and keep the engine revolution speed between 2,800 and 3,000 r/min if the carburetor fails to return to idle when the lever is released. Speedometer unit The speedometer unit is equipped with the following: a digital speedometer (which shows riding speed) an odometer (which shows the total distance traveled) a tripmeter (which shows the distance traveled since it was last set to zero) warning indicators (which show self-diagnosis, cool ant temperature, fuel level, and oil level warnings) fuel meter (which shows the fuel remaining in the fuel tank) grip/thumb warmer heat level indicator  (which shows the heat level of the grip warmer or the thumb warmer) After the engine is started, the tachometer 1 makes one sweep, and the warning light 2 and all segments of the meter 3 turn on and off once. Then the warning light turns on again, and then goes off if there are no problems. The grip warmer heat level is initially displayed for 5 seconds, then switches to the fuel meter display. Odometer and tripmeter modes Pushing the select/reset button 4 switches the display between the odometer mode “ODO” and the tripmeter mode “TRIP”. To reset the tripmeter, push the select/reset button for at least one second while the tripmeter is displayed. NOTE: @ To switch the speedometer, odometer, and tripmeter displays between kilometers and miles, select the odometer mode “ODO”, and then push the select/reset button 4 for at least 10 seconds. ESU00363 High beam indicator light The high beam indicator light 1  comes on when the high beams of the headlights are switched on. (See page 5-12 for headlight beam switch operation.)

Incoming search terms: