rusi motors pictures

You search Auto repair manual PDF rusi motors pictures, if there are search results will appear below. If search results do not exist, please search by others keyword.



  rusi motors pictures Direct Download speed 5282 Kb/s

  rusi motors pictures Full Version speed 6162 Kb/s



2008 Triumph Rocket III specifications and pictures

0

Filed Under (Triumph) by admin on 06-11-2010

download
Triumph Rocket III 2008 Picture credits – Triumph . Click to submit more pictures. 2008 Triumph Rocket III More pictures… Discuss this bike Rate this motorbike This bike’s rating Write a review Sell this motorcycle Such bikes for sale Tip a friend List related bikes General information Model: Triumph Rocket III Year: 2008 Category: Custom / cruiser Rating: 68.5 out of 100. Show full rating and compare with other bikes Engine and transmission Displacement: 2294.00 ccm (139.98 cubic inches) Engine type: In-line three Stroke: 4 Power: 140.00 HP (102.2 kW)) @ 6000 RPM Torque: 147.00 Nm (15.0 kgf-m or 108.4 ft.lbs) @ 2500 RPM Compression: 8.7:1 Bore x stroke: 101.6 x 94.3 mm (4.0 x 3.7 inches) Fuel system: Injection. Multipoint sequential electronic fuel injection Fuel control: DOHC Ignition: Digital – inductive type – via electronic engine management system Cooling system: Liquid Gearbox: 5-speed Transmission type final drive: Shaft drive (cardan) Clutch: Wet. multi-plate Physical measures Dry weight: 319.3 kg (704.0 pounds) Seat height: 739 mm (29.1 inches) If adjustable, lowest setting. Overall height: 1,166 mm (45.9 inches) Overall length: 2,499 mm (98.4 inches) Overall width: 970 mm (38.2 inches) Wheelbase: 1,694 mm (66.7 inches) Chassis and dimensions Frame type: Tubular steel. twin spine Rake (fork angle): 32.0° Front suspension: 43mm upside down forks Rear suspension: Chromed spring twin shocks with adjustable preload Front tyre dimensions: 150/80-R17 Rear tyre dimensions: 240/50-R16 Front brakes: Double disc Front brakes diameter: 320 mm (12.6 inches) Rear brakes: Single disc Rear brakes diameter: 316 mm (12.4 inches) Speed and acceleration Fuel capacity: 23.84 litres (6.30 gallons) Color options: Claret. Phantom Black Further information Parts and accessories Check out parts and accessories from our partners. Ask questions Join the 08 Triumph Rocket III discussion group, the new Triumph forum at Bikez.name or the new Custom / cruiser forum at Bikez.name. Insurance, loans, testsSearch the web for dealers, loan and insurance costs, tests, customizing, etc. Related bikes List related bikes for comparison of specs

Incoming search terms:

BMW R1200GS Exhaust System Installation instructions

0

Filed Under (BMW) by admin on 26-10-2010

download
The manufacturer, importer or dealer shall not be liable for any incidental damage including personal injury or any other damages caused by improper installation or operation of the Akrapovič exhaust system. When installing the Akrapovič exhaust system be careful that the exhaust system does not touch other parts sensitive to high temperature. 2. Akrapovič makes no representation or warranties with regard to damage caused by the improper installation, use and maintenance of the Akrapovič exhaust system. The warranty is limited to defects recognized by our technical department and due to normal use, and excludes items subject to normal wear (gaskets and damping wool). The guarantee is void in case of accident, modification, improper or competition use. 3. Do not attempt to install the Akrapovič exhaust system on a vehicle model for which it was not made or tested by Akrapovič. 4. When the exhaust system gets very hot during operation, be careful not to burn yourself on the exhaust system or parts which are in direct contact with it, even when the engine is not running. Also protect other people, especially children, from the injuries mentioned above. 5. In some cases Akrapovič exhaust system kits contain chemical products (ceramic anti-seizing grease; bolt sealant). Handle with care, do not inhale or swallow. Avoid excessive contact with skin, eyes or mucous membranes. Keep out of reach of children. 6. Technical specifications of Akrapovič exhaust systems and related products are subject to change without notice. 7. Before removing the original exhaust system from your vehicle, please compare the parts you received with the list of materials provided in the installation manual in order to assure that you have all the parts necessary for the installation of your new Akrapovič exhaust system. 8. Although this manual consists of instructions for installation in written form, as well as photographs and pictures representing individual steps of the installation, please note that the photographs and pictures are symbolic and are intended for representation of general overview only. The photographs and pictures contained herein should serve as a guideline only and actual installation of the exhaust system may not correspond with the photographs and pictures entirely.

Incoming search terms:

Installation & Tuning Instructions For all Motorcycle Applications

0

Filed Under (Tips and Review) by admin on 02-01-2012

download
1) Start with a cold motorcycle, and remove the seat (see owners manual for seat removal instructions). 2) Locate a suitable place for your new PowerCard: It is generally velcroed or zip tied under the seat or behind cowling, check for the easiest mounting and wire routing. Often it is easier to place the card in the desired location, and then pull wires from there, rather than connecting the wires and trying to work the PowerCard backward. (In a 2004 Yamaha R6 for example, it is easiest to mount the card, then route connectors one by one through to the engine compartment.) 3) Disconnect the battery ground. Battery may need to be removed to aid in installation (2006 Yamaha R1 for example). 4) Remove the fuel tank and necessary cowlings – many tanks can simply be rotated up and away to allow access to the fuel injector connectors. Secure the tank. Be careful to prevent fuel spills if fuel line removal is necessary – use the quick-disconnect fittings if your motorcycle is so equipped. (see owners manual for tank removal instructions) a. Note: ZX10 installation also requires removal of the stock air box. Unbolt, disconnect fittings, and then turn clock-wise one-quarter turn to remove. Distributed Exclusively by Moss Motors, Ltd.
3 PowerCard®Instructions Injector lead #3 improperly installed (+) 2 1 (-) 4 3 Distributed Exclusively by Moss Motors, Ltd. 5) Connecting the PowerCard harness inline: a. Remove any one factory fuel injector connector from an injector (a flat blade screwdriver or long nose pliers may be used to ease removal). b. Couple the female connector from the PowerCard onto the fuel injector, and plug the male connector into the ECU/factory wiring harness. c. Repeat for the rest of the fuel injector connectors – The order is not important as long as they are installed as they are paired (in and out)

Installation And Tuning Instructions For all Motorcycle Applications

0

Filed Under (Tips and Review) by admin on 27-10-2010

download
1) Start with a cold motorcycle, and remove the seat (see owners manual for seat removal instructions). 2) Locate a suitable place for your new PowerCard: It is generally velcroed or zip tied under the seat or behind cowling, check for the easiest mounting and wire routing. Often it is easier to place the card in the desired location, and then pull wires from there, rather than connecting the wires and trying to work the PowerCard backward. (In a 2004 Yamaha R6 for example, it is easiest to mount the card, then route connectors one by one through to the engine compartment.) 3) Disconnect the battery ground. Battery may need to be removed to aid in installation (2006 Yamaha R1 for example). 4) Remove the fuel tank and necessary cowlings – many tanks can simply be rotated up and away to allow access to the fuel injector connectors. Secure the tank. Be careful to prevent fuel spills if fuel line removal is necessary – use the quick-disconnect fittings if your motorcycle is so equipped. (see owners manual for tank removal instructions) a. Note: ZX10 installation also requires removal of the stock air box. Unbolt, disconnect fittings, and then turn clock-wise one-quarter turn to remove. Distributed Exclusively by Moss Motors, Ltd. 3 Injector lead #3 improperly installed (+) 2 1 (-) 4 3 Distributed Exclusively by Moss Motors, Ltd. 5) Connecting the PowerCard harness inline: a. Remove any one factory fuel injector connector from an injector (a flat blade screwdriver or long nose pliers may be used to ease removal). b. Couple the female connector from the PowerCard onto the fuel injector, and plug the male connector into the ECU/factory wiring harness. c. Repeat for the rest of the fuel injector connectors – The order is not important as long as they are installed as they are paired

KTM 250F Timing Chain Tensioner Installation Instructions

0

Filed Under (KTM) by admin on 19-10-2010

download
1) Remove OEM Tensioner: On some models including the 250F motors, it may be necessary to put the engine at TDC before proceeding. Check your manual. This is not the case on the 450 and 530 single cam motors. • Remove the outer cover plug. • Remove the large cover with copper washer. • Using needle nose pliers grab the end of the OEM tensioner and pull it outward. Be careful not to damage the aluminum port or face. • If the O-ring did not come out with the tensioner, carefully reach into the port and remove it without pushing it further into the engine. 2) Install new Tensioner: • To prepare the new tensioner, set the spring aside. Put the new tensioner in the collapsed position. (They are packaged and shipped in the collapsed position.) If you have extended it, rotate the assembly until the “top” on the piston is facing up. Then a light tap from the bottom will release the ratchet. This will now allow the plunger to be retracted to about 1- 13/16″ (46mm). • Install the O-ring over the tensioner body, keeping it outboard of the ridge as shown. • Slide the tensioner assembly with O-ring (without the spring), into the engine port. The end (with the hex-head spring hole) should only protrude from the engine about 1/32″ (.75mm). • Install the cover and tighten. The copper washer should be tight. • Insert the spring through the cover port. As it is slowly inserted, you may hear clicks as it pushes the plunger inward while ratcheting. • Install and tighten the plug against the spring. Note: some 250F engines have a one piece cap. Slide the spring into the tensioner far enough to hold it, then capture it with the cap and tighten. • Start the engine and carefully check for oil leaks. Adjustment will occur internally as it is needed. No further maintenance of the tensioner is required

Incoming search terms:

CSS/ CSR Separator, Recovery Tank, Purge Valve, CYC Timer & Pump INSTALLATION & OPERATION MANUAL

0

Filed Under (CSR) by admin on 27-10-2010

download
1.*The*CSS/CSR*system*skid*should*be*bolted*to*a*flat*&*level*concrete*foundation*with*suitably*sized*and*quantity*of*anchor*bolts.* The entire system (1″-6″) is on a single skid. For systems 8″ and larger, the separator stands alone on its own 3 legs, while the pump/motor, recovery tank (CSR only), and control panel are on an individual skid. It is therefore incumbent upon the installer to insure*that*the*complete*package*is*bolted*to*a*flat*&*level*concrete*foundation,*to*insure*that*the*”piping*assembly”*is*installed* without any undue stress. 2. Inspect and hydrotest all pipe connections for leaks. *All*flanged*connections*must*have*gaskets,*and*all*threaded*connections*must*have*Teflon*tape*or*anti-seize*coating. 4. Flush all new pipe construction before system operation. In the absence of a pump strainer basket, use a y-strainer with 1/4″ perforated*screen.**The*perforated*screen*must*be*at*least*the*same*size*or*one*pipe*size*larger*than*the*pump*suction.**The* perforated screen will block out larger debris such as welding rods, tools, rugs, gloves, etc. ELECTRICAL 1. Voltage supply to the system must be the same as the voltage indicated on the control panel. 2. Follow the pump operating instructions prior to start-up. 3.*Turn*the*motor*”ON”*and*check*rotation.**Rotation*must*turn*in*the*same*direction*as*the*arrow*located*on*the*pump* casing. If pump is rotating in the opposite direction then reverse L1 and L2 on the incoming power to the panel. Recheck rotation. 4. Starting or in-rush current should not exceed 3 seconds, running current should be equal to or less than nameplate full load amps (FLA). 5. Thermal Overload Setting 5a. Select the Operating Voltage 5b. Multiply Motor Service Factor (SF) by the Full Load Amps (FLA) to get the Service Factor Amps (SFA). 5c. Adjust the Thermal Overload Dial to match SFA Note: Some motors come with SFA written on the nameplate. The majority of our motors come with a 1.15 service factor, but very few come with a 1.25 SF. STARTUP 1. Open system inlet valve 100% and outlet valve 50% (supplied by others). 2.*Suction*line*must*be*flooded. 3. Open separator air vent located near the outlet, (standard on 2″ and larger). 4.*Turn*the*system*”ON.” 5. Purge all the air. 6.*For*HH*&*SP*systems,*open*outlet*valve*until*the*gauge*reads*35psi.*For*LH*systems,*open*outlet*valve*until*a*100%* opening*is*achieved.**If*system*begins*to*vibrate,*then*slightly*close*separator*outlet*until*it*stabilizes

1999-2001 Harley-Davidson Twin Cam 88 FI Controller Installation MANUAL

0

Filed Under (Harley Davidson) by admin on 25-03-2012

download
Remove the seat. Remove or raise the fuel tank. The tank needs to be raised enough to give access to the fuel injectors and TPS wires. Unplug the front injector. On the FI Controller, there are 2 pairs of injector connectors. Plug the pair with the orange wires into the front cylinder injector harness and front cylinder injector. Repeat this using the other connector pair and the rear cylinder injector. Locate the TPS connector behind the throttle body. STEP 1 STEP3 STEP2 Installation Part# DFCH-2 2 Rear Cylinder Injector Front Cylinder Injector TPS Connector STEP 3 STEP 2 STEP1 Unplug the connector from the TPS. Crimp the wire tap onto the wire that is grey with a purple stripe. This wire should be in position “C” on the connector. Plug the grey wire from the FI Controller into the wire tap. Run the wiring harness for the FI Controller from the engine to the seat. Make sure that it will not get damaged when you reinstall the tank. Use one of the wire ties to tie the wires to the frame, away from the cylinder head. Place the FI Controller where you plan on mounting it permanently. In most cases, this will be under the seat. Connect the ground lug (black wire) to a grounding point on the bike. Use the Velcro tape to mount the FI Controller in position. Use alcohol swab to clean mounting surface prior to attaching Velcro. Reinstall fuel tank and seat. STEP 4 STEP 6 STEP 5 STEP4 STEP6 STEP5 Installation Part# DFCH-2 3 FI Controller
For Tech Support: 800.928.3962 Controls The FI Controller is preprogrammed with 4 base fuel curves. The curves are selected using the switch labeled BASE. These curves adjust fuel delivery based on throttle position and RPM, providing the right amount of fuel under all conditions. The 4 fuel curves correspond to varying levels of performance modifications. The levels of modification are broken down into the following groups. Base Curve 1 – Stock or basic modifications. This includes slip on exhausts, intakes, air boxes, and air filters. It will also work for headers or full exhaust systems. Base Curve 2 – Motor upgrades. This includes cams, 95 ci motors. Base Curve 3 – More extensive motor upgrades. This includes 103 ci motors, cams, ported heads

2005 HONDA CBR 600RR Superbike BRAKE LINES INSTALLATION INSTRUCTIONS

0

Filed Under (Honda) by admin on 03-01-2011

download
Step 1: Identify the key components that complete our Super bike KIT, you should have 2 lines (front Kit), and 1 Double banjo bolt and 2 lower adapters. There are also a total of 7 washers, 5 will be used, and 2 are spares. We ALWAYS strongly suggest having a professional mechanic install these brake lines, all other installations VOID warranty. Inspect your brake system after every race. Step 2: Cover the complete front end of the bike so that if any brake fluid does spill the paint will not be damaged, brake fluid will spill, there is no question!! Step 3: Uninstall stock hoses; be aware of how the stock system was routed in case you need to re-install it. Step 4: Install onto the calipers the Galfer adapter, the course thread area threads to the caliper with one washer. Torque level is 12 to 13 ft pounds. (See picture on adapter A) Step 5: Install right and left lines to the master cylinder, the right line is the shortest out of the two lines. These lines will travel from the master cylinder to the calipers; a double banjo bolt is included to run two lines down. (Picture B). This is the sequence on the master cylinder: Master cylinder, washer, straight banjo (from right line), washer, 12 degree banjo (from left line) washer and double banjo hex. Double banjo bolt torque level is 12 FT Pounds . (For positioning see picture G). Banjo 12 on left line must be facing a bit more to the left than the straight banjo of right line, so that the lines can cross at lower triple clamp better. On the calipers, make sure that the 90-degree fittings are pointing out a little bit, thread banjo end to the adapter, torque the end to 6 ½ Ft pounds . (See pictures C, D, E) Before you begin bleeding process, please check for clearance of the lines, push on the front end down, see that the lines are not binding with anything and that when the front end is fully extended or fully under pressure the lines are traveling correctly and clear from any obstructions. Ones the lines have been check for clearance; the two lines are Zip tied together at the same level of the lower triple clamp area. (See pictures F), please make sure that lines cross each other. Step 6: Bleed system, conventional bleeding, pump and release the air from caliper bleed nipples… DOT 4-brake fluid is recommended.

Incoming search terms:

Harley Davidson V Rod turbocharger installation Introduction

0

Filed Under (Harley Davidson) by admin on 31-10-2010

download
The following procedures should be followed in the order they are listed to avoid extra work. The installation should take 8-10 hours. The tools you will need are standard hand tools. Included in the kit are all necessary drills and taps needed for the installation. Footnotes are provided to help with additional problems you might encounter. *Custom Performance has designed this turbocharger kit to provide usable, dependable horsepower for many trouble free miles. It was intended to make 8 lbs of boost on 91 or higher octane fuel. At this level the bike should make @ 160 horsepower. The MAP included on the CD and website is for this level of performance. If the customer chooses to increase the boost level, the fuel system will have to be remapped and other modifications may be needed to supply enough fuel for higher levels of performance. Also engine modifications may be needed to support higher levels of horsepower. Custom Performance does not recommend raising boost levels beyond the kit-preset levels unless you make the proper modifications. Expensive engine damage may result if these warning are not observed. With that said lets get started. *There are color pictures of the various steps and extra pictures for reference. Look them over as they will help show what each step will look like. There is a fuel and ignition MAP for the Harley race tuner that will be loaded after the installation but before you start the bike. The map is for 8 lbs of boost, which is what we recommend. If you increase boost level above the kit settings, the bike will need to be remapped to insure the engine doesn’t run dangerously lean, resulting in engine damage.

2008 Kawasaki ZG1400 Concours ABS Front 3-Line Kit and FK003D625R Single Line Rear INSTALLATION INSTRUCTIONS

0

Filed Under (Kawasaki) by admin on 29-01-2011

download
Step 1: Identify the key components that complete our front brake line kit: You should have three (3) hoses, one (1) double banjo bolt, and two (2) single banjo bolts There are also a total of nine (9) washers and (3) brass conic inversors. Seven (7) washers and two (2) inversors will be used; the rest are spares. If you have purchased a rear kit as well, locate the following additional pieces: One (1) hose with bracket and c-clip attached, one (1) single banjo bolt, two (2) brass inversors and three (3) washers. You will use one (1) “olive” conic inversor and two (2) washers, the rest are spares. Step 2: To ensure no paint damage from a brake fluid spill, completely cover the front end of the bike. This process can be messy, and brake fluid WILL drip! Step 3: After drying out the OEM brake system, uninstall stock hoses. On the front brake line kit, we are replacing three hoses and their respective blocks (see pictures 1-2 for blocks) . For the rear, we are replacing one hose from the master cylinder to the ABS hard line. Take note of how the stock system was routed, in case you need to reinstall it. Step 4: Locate Line A – This will travel from the master cylinder to the ABS Junction. (See picture 3) You will use a single banjo bolt and two washers at the master cylinder, and an “olive” inversor to thread female end to hard pipe for incoming ABS (right side). * We have replaced the block at the upper triple clamp with a c-clip; please use your stock bolt to thread this in. (See picture 4) Locate Line B – This will travel from the ABS Junction to the right caliper. First, thread the female end to the hard pipe for outgoing ABS (left side). There will be a bolt from the OEM blocks at ABS Junction; please use this to thread c-clips into frame as shown in picture 5 . There is another bolt/OEM block located at the lower triple clamp; please use this to thread the c-clip in as seen in picture 6. Locate Line C – This will cross over the front fender using OEM holders, from right caliper to left caliper. Thread caliper banjos from Line B and C using the following sequence: double banjo hex, washer, 40- degree banjo from Line C, washer, 20-degree banjo from Line B, washer, caliper. Please see pictures 7 and 8 for reference. Thread single banjo bolt into left caliper, using two washers and 40-degree banjo. If applicable, locate rear Line D – this will travel from the rear master cylinder to the hard line for ABS. Thread the hard pipe into female end using a “olive” inversor, and attach bracket to swingarm as seen in picture 9 . Use the bolt from the holder for ABS hose, and sit our bracket on top of the OEM holder. Using the bolt from the OEM ABS hose holder in location shown in picture 10 , attach the c-clip on top of holder and tighten. Finally, thread 30-degree banjo in caliper using the following sequence: single banjo hex, washer, banjo, washer, caliper

Incoming search terms:

Incoming search terms: