rx king cobra

You search Auto repair manual PDF rx king cobra, if there are search results will appear below. If search results do not exist, please search by others keyword.



  rx king cobra Direct Download speed 5282 Kb/s

  rx king cobra Full Version speed 6162 Kb/s



Cobra Motorcycle and ATV Specifications CX65 CX50 Sr. (The King) CX50 Jr. ECX 70 ECX 50 ECX80AC

0

Filed Under (Cobra) by admin on 14-11-2010

download
Dry Weight 122 lbs 91 lbs 81 lbs 210 lbs 206 lbs 210 lbs Engine Cobra 65cc 2-stroke Cobra 50cc 2-stroke Cobra 50cc 2-stroke Cobra 70cc 2-stroke Cobra 50cc 2-stroke Cobra 80cc 2-stroke Bore x Stroke 44.5mm x 41.7mm 39mm x 41.7mm 39mm x 41.7mm 44.5mm x 44.7mm 39mm x 41.7mm 47.6 mm x 44.7mm Induction Case Reed V-Force® Reed Valve- 24mm Mikuni carb Case Reed Carbon Pedal 19mm carb Case Reed Carbon Pedal 14mm carb Case Reed V-Force® Reed Valve- 24mm Mikuni carb Case Reed Carbon Pedal 21mm carb Case Reed V-Force® Reed Valve- 24mm Mikuni carb Cooling Water cooled Cylinder and Case Water cooled Water cooled Water cooled Cylinder and Case Water cooled Water cooled Cylinder and Case Clutch Hydraulic ally actuated Cobra 3Gx 3-Shoe Cobra 3Gx 3-Shoe Hydraulic ally actuated – (auto option) Cobra 3Gx 3-Shoe Rekluse Z-ball auto-clutch Transmission Six-speed sequential Single-speed auto Single-speed auto Six-speed sequential Single-speed auto Six-speed sequential Exhaust Tuned pipe and silencer Tuned pipe and silencer Tuned pipe and silencer Tuned pipe and silencer Tuned pipe and silencer Tuned pipe and silencer Lubrication Mixture lubrication Mixture lubrication Mixture lubrication Mixture lubrication Mixture lubrication Mixture lubrication Fuel Capacity 1.06 Gallons .85 Gallons .70 Gallons 1.9 Gallons 1.9 Gallons 1.9 Gallons Frame Twin Spar Oval HSLA Double Cradle 4130 ChrMo Steel Double Cradle 4130 ChrMo Steel Arens design twin spar Arens design twin spar Arens design twin spar Wheelbase 1140mm 990 mm 908 mm 1067mm (track 915mm) 1067mm (track 915mm) 1067mm (track 915mm) Seat Height 762mm 680 mm 607 mm 762 mm 737 mm 762mm Ground Clearance 250mm 240 mm 216 mm 205 mm 205 mm 205mm Front Brakes Hydraulic Disk (205mm) Hydraulic Disk (160mm) Hydraulic Disk (160mm) Hydraulic Disk (160mm) Hydraulic Disk (160mm) Hydraulic Disk (160mm) Rear Brakes Hydraulic Disk (165mm) Hydraulic Disk (140mm) Adjustable Drum Hydraulic Disk (180mm) Hydraulic Disk (180mm) Hydraulic Disk (180mm) Front Suspension Marzocchi 35mm USD Adjustable 220mm travel Cobra 30mm USD 210mm travel Marzocchi 32mm 168mm travel Dual A-Arm with SVO™ patented steering design. 248mm travel Dual A-Arm with SVO™ patented steering design. 248mm travel Dual A-Arm with SVO™ patented steering design. 248mm travel Rear Suspension Öhlins Fully Adjustable 270mm travel Fox Piggyback Fully Adjustable 248mm travel Öhlins Piggyback 170mm travel Fox Piggyback 220mm travel Solid axle Fox Piggyback 220mm travel Lightweight tube axle Fox Piggyback 220mm travel Solid axle Wheel Front / Rear 14″ spoke / 12″ spoke (Al rims, Billet hubs, 9ga. spokes) Cobra 12″ Billet Cobra 10″ Billet Cobra 10″ Billet Cobra 10″ Billet ITP 10×5 (4 x1) Al Douglas 8×6.5 (4×2.5) Al ITP 10×5 (4 x1) Al Douglas 8×6.5 (4×2.5) Al ITP 10×5 (4 x1) Al Douglas 8×6.5 (4×2.5) Al Tires Front / Rear 60-100×14 Dunlop 80-100×12 Dunlop 2.5×12 / 2.75×10 2.5×10 / 2.75×10 ITP Holeshot 19/6 ITP 16/6.50-9 ITP Holeshot 19/6 ITP 16/6.50-9 ITP Holeshot 19/6 ITP 16/6.50-9

Incoming search terms:

Cobra 2008 CX50SR (King) Ignition System installation Manual

0

Filed Under (Cobra) by admin on 10-11-2010

download
Many 2008 Cobra CX50SR (King) customers are experiencing performance issues with their new motorcycles. These issues include cracking/popping noises, degrading performance, and excessively hot exhaust pipes. These issues have been traced back to manufacturing flaws with the new IDM brand ignition system. Because of the time associated with getting these issues sorted out, Cobra is switching production of the 2008 King over to the PVL brand ignition system (the same design used on 2007 model King motorcycles). Customers with 2008 Kings built prior to this date may exchange it for a PVL system at no cost for the hardware. For existing product in the field, Cobra will not support the IDM system until our supplier has their component functioning properly. To install the PVL system on the 2008 King simply remove the old hardware, and bolt on new (an updated Cobra universal puller will be required to remove the ignition rotor). The timing of the new PVL system will have to be set properly during installation

2006 King Cobra Service Procedure

0

Filed Under (Cobra) by admin on 10-11-2010

download
Cobra CX50 SR is a close-tolerance high performance machine and break- in time is very important for maximum life and performance. The CX50 SR can be ridden hard after the first ½ hour break-in time but it is recommended that no adjustments are made to the carburetion or suspension until the full 8 hours of bike break-in has elapsed. Also, after the engine, transmission, and drive train have been broken-in for the full 8 hours, the bike will be faster! Use a fuel / oil mixture of 32:1 for the full 8 hour break-in period. Be sure to use high-octane pump gas, with Cobra’s specially formulated Cobra Venom 2-cycle Race Oil . (Part # MCMUOL02) CAUTION: Failure to use proper fuel, oil, or fuel/oil mixture may result in premature engine wear or damage to the machine. Adhering to the following break-in schedule will result in long lasting high performance machine. • Start bike on stand • First 5 minute period, operate the bike on the stand with a combination of idle and high RPM operation. (avoid prolonged high RPM but spin the rear wheel good at least once or twice per minute) • Allow bike to cool • Ride for 15 minutes maximum (avoid prolonged high RPM operation and avoid abusing the clutch with throttle blipping. • Cool and inspect bike for loose fasteners. • Next ½ hour of operation, avoid prolonged operation at Wide Open Throttle. • After 1 hour of operation o Check for loose bolts and nuts on the bike and retighten as necessary (proper toque values are listed under Specifications). o Clean the carburetor bowl. o Change the transmission / clutch lubricant. • After 8 hours of operation o Change the fork oil. o Have a Certified Cobra Mechanic change the shock oil. • Your bike is now ready for the highest level of competition! NOTE: During break-in the bike will likely lose some engine coolant through the radiator overflow hose. Losing up to 4 oz (120 ml, ½ cup) is normal. Proper coolant level will cover the top of the radiator cores. Removing the radiator cap and looking inside is the only way to check the coolant level. 8
Never open the radiator cap of a machine that has a hot or warm engine or one that has recently been ridden. Burning and scalding could occur. CAUTION: It is important that the radiator cap is installed correctly and completely otherwise engine damage could occur. Starting Procedure Before starting the machine inspect the following: • Check for proper tire pressure in both tires. • Observe the chain tension and adjust if necessary. • Observe the coolant level and fill if necessary. • Verify that the chain rollers and sliders do not have improper wear. • Verify that the handlebars are tight. • Check the throttle for smooth operation and that it ‘clacks’ shut properly. • Check for loose bolts and nuts, and re-torque as necessary. • Verify that the air filter is clean and properly saturated with oil. • Insure that the fuel tank contains an adequate volume of fuel / oil mixture to complete the distance required. (High octane pump gas with Cobra’s specially formulated Cobra Venom 2-cycle Race Oil ) • Turn the fuel on by rotating the fuel petcock knob to the vertically downward position (reserve position is horizontally forward) CAUTION: For best results from your Cobra Motorcycle use only the recommended fuels. Testing has shown that most ‘race’ fuels actually degrade performance. Always wear a helmet and other protective riding gear. When your pre-ride inspection is complete the bike may be started. For a cold engine follow this procedure. 1. Place the motorcycle on a stand of sufficient strength that positions the motorcycle in a level upright position with the rear wheel off the ground. 2. Pull up the choke knob and turn it to lock it. 3. Kick start the engine. 4. Rev the engine in short spurts, turning the throttle no more than 1/4 open until the engine will run without the choke.

Express ATVS -250cc Cobra Setup/ Installation Manual

0

Filed Under (Cobra) by admin on 10-11-2010

download
Unpacking your Cobra Installing the front shock Installing the front tires Installing rear shocks Installing the rear tires Installing seats and harnesses Steering wheel installation Roll cage installation Safety checks / Adjustments General maintenance Unpacking your Cobra First off you should pull the carton off from your new 250 Cobra cart. Inspect the cart thoroughly to make sure that your new Cobra has not been heavily damaged. You will notice that the product has a metal frame holding it in place; you may want to start removing bolts from the shipping steel frame. The next step is to remove the metal frame and lift it off of the cart. Remove any of the metal frame that may afford resistance when working on the cart it self. Be careful the metal frame may be heavy and sharp. Now would also be a good time to inspect your Cobra a little more thoroughly. In the box with the Cobra you should have found a box containing miscellaneous hardware. Installing the front shock Using some of the bolts you found in your box, install the front shocks sliding the bolt through the brackets and tighten the nut down. Next, you will need to place the ball head into the turning arm, then tighten the castle nut and insert a cotter pin so that the castle nut doesn’t loosen and become a hazard. Installing the front tires
Find the front tires and place them on the front hub and place the lug nuts on the studs. Tighten them down. Make sure that all of the lug nuts are on tightly. Installing the rear shocks Moving to the rear of the Cobra you will notice the rear shocks are not inserted. Place the rear shocks into the bracket on the rear of the Cobra. Slide one of the provided bolts through the bracket and shock eyelet and tighten the bolt down. Installing the rear tires Now that the shocks have been placed properly you can install the rear tires, place the tires onto the axle then place the rear rim lined up onto the axle and tighten the provided castle nut down. Place the cotter pin through the axle and bend off to the side. This is so the castle nut does not loosen under load. Installing the seats and harnesses
(The arrow points to an example of where the seat bolts mount) Find the two racing seats shipped in the box with the Cobra. You will need to affix them to the frame by sliding the bolts up through the bottom of the frame. This can be tricky so have patience. Once both seats have been placed in the cart and tightened find the harnesses. Once found the harnesses mount to a bracket behind the seats. Place a bolt through the bracket and bolt the harnesses down tightly. Installing the steering wheel Find the steering wheel and place it onto the steering wheel mount. Grab the six small screws and place them through the steering wheel and mount, tighten them down but also make sure the top of the wheel is facing up. Installing the roll cage

Incoming search terms:

HARLEY DAVIDSON ROAD KING SOLO BUCKET AND PASSENGER PILLION INSTALLATION INSTRUCTIONS

0

Filed Under (Harley Davidson) by admin on 10-02-2011

download
Installation SOLO SADDLE ONLY 1. Remove stock seat and grabstrap according to applicable Service Manual instructions. 2. Road King standard models . Remove and save the stock screws and seat mount bracket at the back of the rider solo seat. 2000 and later models . Remove the retainer washer from the stud plate and replace with two black retainer washers (2). Be careful not to allow stud plate to fall through the fender. 3. Road King standard models . Install stock solo seat mount bracket using two stock screws saved in Step 2. Road King Classic Custom models . Install solo seat mount bracket onto back of solo seat using bracket and screws included in Mount Kit Number 52903-01. 4. Install seat by sliding front of seat into seat holder bracket. Pull up on the nose of the seat to verify that the seat is securely installed. After installing seat, pull upward on front of seat to be sure it is in locked position. While riding, a loose seat can shift causing loss of control, which could result in death or serious injury. (00070a) 5. 1999 and later models . Install 1/4 in. star washers (6), spacers (4) and acorn nuts (3) onto rear mount studs. Torque to 72 in-lbs (8.13 Nm). 1998 and earlier models . Install 5/16 in. star washers (5) and 5/16-18 x 3/4 in. buttonhead screws (1) into stock mount nuts. Torque to 17 ft-lbs (23 Nm). SOLOAND PILLION 1. Remove stock seat and grabstrap according to applicable Service Manual instructions. Retain all hardware for later use. 2. Road King standard models . Remove and save the stock screws and seat mount bracket at the back of the rider seat. 3. Road King standard models. Install stock seat mount bracket onto new solo seat using two screws saved in Step 2. Road King Classic Custom models. Install solo seat mount bracket onto back of solo seat using bracket and screws included in Mount Kit Number 52903-01. 4. 1999 and later Road King standard models . Secure the rear mount bracket with stock mushroom nuts (10) and two 1/4 in. star washers (6). Torque to 72 in-lbs (8.13 Nm). 1998 and earlier Road King standard models . Install solo seat by sliding front of seat into holder bracket on bike. Secure the rear mount bracket with the two mushroom screws (11) and two 5/16 in. star washers (5). Torque to 17 ft-lbs (23 Nm). Road King Classic Custom models . Mount Kit Number 52903-01 is required for installation. Install solo seat (7) by sliding front of seat into holder bracket on bike. • 1999 and later models . Using Mount Kit Number 52903-01, secure the rear mount bracket with the two mushroom nuts (10) and two 1/4 in. star washers (6). Torque to 72 in-lbs (8.13 Nm). • 1998 and earlier models . Using Mount Kit Number 52903-01, secure the rear mount bracket with the two mushroom screws (11) and two 5/16 in. star washers (5). Torque to 17 ft-lbs (23 Nm)

Incoming search terms:

2003 KING Owners / Service Manual

0

Filed Under (Cobra) by admin on 01-12-2010

download
Specifications – General Items KING Dimensions Wheelbase 39″ (991mm) Wheel size 10″ (254mm) rear, 12″ (305mm) front Seat height 26″ (660mm) Engine Type 2-stroke, single cylinder, reed valve Cooling system Liquid-cooled Displacement 49.8 cc Bore and stroke 39 mm x 41.7 mm Ignition system Electronic Spark plug Splitfire SF406B Gap 0.023″ – 0.025″ (0.58 – 0.64 mm) Ignition timing 0.050″ (1.3 mm) Before To Dead Center (BTDC) Fuel type Sunoco MO2 X or 93 octane pump gasoline OTHER RACE FUELS ARE NOT RECOMMENDED Oil type Cobra Venom 2-cycle Race Oil Fuel / oil mix ratios Between 32:1 and 40:1 (after engine Break-In is complete) Carburetion 19 mm Dell’Orto Main Jet 94 Slow (Pilot) jet 65 Float Height 16mm + 0.5mm (0.63″ + 0.020″ Transmission Speed Single Clutch Cobra 3 shoe Final drive ratio 13/39 T Chain 100 links 420 Transmission / clutch oil type Cobra Venom 3 Shoe Clutch Milk, or Dexron III Quantity 235 ml (8.0oz) 5 Chassis Front tire 2.50 – 12 Pressure 15 psi minimum Rear tire 2.75 – 10 Pressure 15 psi min. (20 psi for hard pack or rocky conditions) Front fork Cobra 30mm USD Fork oil type SAE 5 weight Fork oil amount 118 ml (4.0 oz) Optional Components • Carburetor jets • Sprockets o Front o Rear • Suspension Springs Weight of Rider (lb) Fork Spring Shock Spring Less than 51 7 lb/in, KCKG0007 SCKGOH10 (yellow, 175lb/in) 51 – 60 9 lb/in, KCKG0009 SCKGOH85 (gray, 185 lb/in) Greater than 60 12 lb/in, KCKG1200 SCKG0H, (white, 195 lb/in) • Suspension Valving Damping Rate Fork Valving Compression (base valve) Fork Valving Rebound (mid valve) Shock Valving (kit) Soft (fast) KAKG0013 KAKG0016 SCKGOH24A Standard KAKG0014 KAKG0017 SCKGOH24 Hard (slow) KAKG0015 KAKG0018 SCKGOH24B • Cobra BIG AIR SX Fork Kit part #KKKG2003 6 Specifications – Torque Values Torque Value Fastener ft-lb in-lb Nm Size & Remarks Cylinder head nuts 9.2 110 12 ¼” Crankcase bolts 6.6 80 9 6 x 1.0 Spark plug (SP) (SP) (SP) 14 x 1.25 Stator bolts 2.1 25 2.8 #8 Stator cover bolts 1.7 20 2.3 #8 Clutch cover bolts 5.8 70 7.9 6 mm Clutch 40 480 54 10*** Front axle nut 25 300 34 12 x 1.25 Front brake caliper Engine mount bolts 22 265 30 8 mm Swingarm Pivot 21 250 28 14 mm Intake manifold bolts 4.6 55 6.2 6 mm Rear Axle Bolt 25 300 34 12 mm Rear Sprocket Bolts 18 216 24 7 mm Fork cartridge rod 12 144 16 Triple clamp bolts 6 72 8 6 x 1.0 Fork cap 5 60 6.7 1.25″ x 18 Ignition rotor nut 40 480 54 10 mm** ** Use green (wicking / bearing retainer) thread locker, with primer, on the flywheel / crankshaft taper but none on the threads.

1965 Shelby Cobra FIA Daytona Replica specifications

0

Filed Under (Cobra) by admin on 15-11-2010

download
Color: Blue (dark) Odometer: 196 Miles Transmission: Manual LHD/RHD: LHD Convertible: No Listed under categories: 1950-69 Post-War, Race/Track/Rally Country: United States State/ Province: OH City/ Town: MENTOR Zip/ Postal Code: 44060 Description: It’samazinghowmuch fuss six little cars can make. Six cars designed bya 24 year old art school graduate, in 1964, were enough to turn FIA racing upside down. The bodies turned out to be golden, the chassis were proven and the will to win was provided by a certain Texan who you may have heard of. More than forty years later the power of the Shelby Cobra Daytona’s triumph is still celebrated by small volume builders making replicas of the car that conquered Europe. Many people consider these modern replicas to be”kit cars,”but where an outfit like Highland Daytona Racing is concerned, the cars released are anything but boxes of parts. Highland sells only turnkey cars, built to customer specifications and a very high standard. This gorgeous car here, resplendent in the classic blue and white paint scheme, runs and drives extremely well, goes like stink thanks toits traditional small block Fordengine—just like the originals. The car is also titled as a ’65 Shelby—no state issued, generic or random year tags here! The original six Daytona Cobra Coupe factory racers enjoyed a short but impressive racing career: Originally built for the 1964-65 racing season using 289 Shelby Cobra roadster chassis, these were America’sanswerto Ferrari’shighly successful 250 GTO. In their first year of competition, the Daytona Coupes won the GT class at Sebringandthen placed 4thoverallat Le Mans. They proved to be so competitive that Ferrariofficials, fearing a loss of the championship, managed to get the Monza, Italy final round cancelled, knowing the Daytonaswouldwin the race and the Championship. Consequently, Ferrariclaimed the 1964 FIA World Manufacturer’sChampionship. The following year Enzo Ferrari, realizing he would lose to the Daytona’s, pulled his factory support from the GT program, paving the way for the Daytona Coupe walkover. In 1965, the ex-Shelby Daytona Coupes of the UK’sAlanMannracing team won the FIA’s World Manufacturer’s GT title with ease. Everyone knows Cobra roadster replicas are great fun fora quick sprint on a sunny day, but the new crop of Daytona Coupe replicas presents anew concept: Cobra clones for serious long-distance touring. Many enthusiasts attend cruise nights, car club tours, and marathon events like the Hot Rod Power Tour and the One Lap of America. But as fun as roadsters are, withmega-power and rock-solid suspension, the smile factor can wear a little thin after an hour or soon the straight and narrow.

2007 King 50 Specifications, Owners Parts, Service Tuning

0

Filed Under (Cobra) by admin on 03-12-2010

download
Use a fuel / oil mixture of 32:1 for the full 8 hour break-in period. Be sure to use high-octane pump gas, with Cobra’s specially formulated Cobra Venom 2-cycle Race Oil . (Part # MCMUOL02) CAUTION: Failure to use proper fuel, oil, or fuel/oil mixture may result in premature engine wear or damage to the machine. Adhering to the following break-in schedule will result in long lasting high performance machine. • Start bike on stand • First 5 minute period, operate the bike on the stand with a combination of idle and high RPM operation. (avoid prolonged high RPM but spin the rear wheel good at least once or twice per minute) • Allow bike to cool • Ride for 15 minutes maximum (avoid prolonged high RPM operation and avoid abusing the clutch with throttle blipping. • Cool and inspect bike for loose fasteners. • Next ½ hour of operation, avoid prolonged operation at Wide Open Throttle. • After 1 hour of operation o Check for loose bolts and nuts on the bike and retighten as necessary (proper toque values are listed under Specifications). o Clean the carburetor bowl. o Change the transmission / clutch lubricant. • After 8 hours of operation o Change the fork oil. o Have a Certified Cobra Mechanic change the shock oil. • Your bike is now ready for the highest level of competition! NOTE: During break-in the bike will likely lose some engine coolant through the radiator overflow hose. Losing up to 4 oz (120 ml, ½ cup) is normal. Proper coolant level will cover the top of the radiator cores. Removing the radiator cap and looking inside is the only way to check the coolant level. 8 Never open the radiator cap of a machine that has a hot or warm engine or one that has recently been ridden. Burning and scalding could occur. CAUTION: It is important that the radiator cap is installed correctly and completely otherwise engine damage could occur. Starting Procedure Before starting the machine inspect the following: • Check for proper tire pressure in both tires. • Observe the chain tension and adjust if necessary. • Observe the coolant level and fill if necessary. • Verify that the chain rollers and sliders do not have improper wear. • Verify that the handlebars are tight. • Check the throttle for smooth operation and that it ‘clacks’ shut properly. • Check for loose bolts and nuts, and re-torque as necessary. • Verify that the air filter is clean and properly saturated with oil. • Insure that the fuel tank contains an adequate volume of fuel / oil mixture to complete the distance required. (High octane pump gas with Cobra’s specially formulated Cobra Venom 2-cycle Race Oil ) • Turn the fuel on by rotating the fuel petcock knob to the vertically downward position (reserve position is horizontally forward

2004 COBRA CM50 Specifications And Service Manual

0

Filed Under (Cobra) by admin on 14-11-2010

download
Dimensions Wheelbase 35.75″ (908mm) Wheel size 10″ (254mm) Seat height 23.9″ (607 mm) Stock #TCHJ0001 22″ (559 mm) Optional # TCHO0001 Engine Type 2-stroke, single cylinder, reed valve Cooling system Liquid-cooled Displacement 49.8 cc Bore and stroke 39 mm x 41.7 mm Ignition system Electronic Spark plug Champion 8339-1, 8332-1 hotter, 8904-1 colder Gap 0.023″ – 0.025″ (0.58 – 0.64 mm) Ignition timing 0.050″ (1.3 mm) Before To Dead Center (BTDC) Fuel type High octane pump gasoline RACE FUELS ARE NOT RECOMMENDED Oil type Cobra Venom 2-cycle Race Oil Fuel / oil mix ratios Between 32:1 and 40:1 (after engine Break-In) Carburetion 14 mm Dell’Orto Main Jet 92 Slow (Pilot) jet 55 Float Height 16mm + 0.5mm (0.63″ + 0.020″) Transmission Speed Single Clutch Cobra 3 shoe Final drive ratio 13/37 T Chain 88 links 420 Transmission / clutch oil type Cobra Venom 3 Shoe Clutch Milk, or Dexron III Quantity 235 ml (8.0oz) Replacing Transmission / Clutch Lubricant Tools needed: • 225 ml (7.6 oz) Cobra Venom 3 Shoe Clutch Milk (Part # MCMUGF01), or Dexron III Automatic Transmission Fluid. • 13 mm combination wrench Procedure: 1. Begin this procedure with a bike that has been ridden more than 5 minutes but less than 10 minutes. It is desired to have the engine warm enough so that the oil ‘runny’ but not so hot that there is risk of being burned by the engine or the oil.

2003 COBRA PW3 Owners / Service Manual

0

Filed Under (Cobra) by admin on 10-11-2010

download
Starting Procedure Before starting the machine inspect the following: • Fill the 2-stroke injector oil reservoir with Cobra’s specially formulated Cobra Venom 2-cycle Race Oil . • Insure that the fuel tank contains an adequate volume of fuel to complete the distance required. ( Sunoco MO2X or 93 octane pump gas). • Check for proper tire pressure in both tires. • Observe the chain tension and adjust if necessary. • Observe the coolant level and fill if necessary. • Verify that the chain rollers do not have improper wear. • Inspect the frame for; o Cracks in the metal. o Cracking paint which might indicate overly stressed material. • Verify that the handlebars are tight. • Check the throttle for; o Smooth operation and sound closing. o Frayed strands of the cable inside the throttle housing. • Check for loose bolts and nuts, and re-torque as necessary. • Verify that the air filter is clean and properly saturated with oil. • Turn the fuel on by rotating the fuel petcock knob to the vertically downward position (reserve position is horizontally forward). CAUTION: For best results from your Cobra Motorcycle use only the recommended fuels. Testing has shown that most ‘race’ fuels actually degrade performance. When your pre-ride inspection is complete the bike may be started. For a cold engine follow this procedure. 1. Place the motorcycle on a stand of sufficient strength that positions the motorcycle in a level upright position with the rear wheel off the ground. 2. On the carburetor, flip the black choke knob upward from the right side of the bike. 3. Kick start the engine by kicking the lever forward. 4. Rev the engine in short spurts, turning the throttle no more than 1/4 open until the engine will run without the choke. 5. Verify a functional engine shut-off switch by shutting off the engine. 6. Restart the engine and proceed with riding when the engine is sufficiently warm (i.e. the side of the cylinder is warm to touch). CAUTION: Never rev an engine full throttle when it’s cold or slightly warmed up. Cobra recommends that you tell your child to take it easy the first couple of minutes in practice until the engine comes up to full operating temperature. Make sure your engine is properly warmed up before racing.

Incoming search terms: