sales msa hinet net mail

You search Auto repair manual PDF sales msa hinet net mail, if there are search results will appear below. If search results do not exist, please search by others keyword.





HONDA TRX 450R Nerf Bar INSTALLATION AND REMOVAL INSTRUCTIONS

0

Filed Under (Honda) by admin on 23-12-2011

download
Parts List: Quantity Part 1 Nerf Bar Left 1 Nerf Bar Right 2 Hex Head Bolt, M10 x 70mm 2 Flat Washer, M10 2 Hex Head Bolt, M6 x 16mm 2 Flat Washer, M6 4 Net Clips 1 Net Set 2 Footpeg Washer 2. Preparation: a) Set/Lock rear parking brake on bike, turn gas petcock to ‘Off’ position and stand bike upright so that it is sitting on the rear grab bar. Make sure vehicle is secure and will not fall over while installing your new Nerf Bars. 3. Installation: a) Install Hardware & Web Strap per photo’s: NOTE: Loosely install all hardware and tighten when complete. Torque M10 Bolts @ 30 ft. lbs. Torque M6 Bolts @ 8 ft. lbs. REMOVE & REUSE OEM BOLTS TO ATTACH FOOT PEG. ATTACH FOOT PEG TO NERF SUPPORT USING M6 X 16MM HEAD BOLT AND WASHER. ATTACH NET CLIPS NOTE: FIRST SLIDE LEFT NERF WELDED TUBE INTO RIGHT NERF TUBE THEN, LOOSELY ATTACH FRONT NERF BARS TO THE A-ARMS USING OEM NUTS AND SUPPLIED M10 X 70MM BOLTS AND WASHERS

Incoming search terms:

BMW Motorcycles F 650 GS Dakar fuel tank replacement

0

Filed Under (BMW) by admin on 12-11-2010

download
Your center has been requested in a recent e-mail, to forward VIN, color Information: and status information on all F 650 GS(A) and Dakar models remaining in your inventory. Fuel tanks, together with the appropriate colored trim pieces, will be forwarded to your center for each bike in your inventory as replacement parts arrive in BMW NA inventory. Warranty Please enter a warranty campaign claim , encompassing the following Reimbursement: Work Package information, when claiming reimbursement for the updates called for in this bulletin. Even though there is no charge for the parts, a sublet of $60.00 will be applied to each claim. This sublet amount is intended as a combination of both the handling and as reimbursement for incidental items that may be required in the replacement of the fuel tank. Work Package #1 is to be used in the replacement of all F 650 GS(A) and Dakar model fuel tanks. Defect Code: 00 00 16 1100 Description: Fuel Tank – Leaking Flat Rate Code: 00 60 059 Description: Remove and reinstall fuel tank (USA only) FRU: 12 FRU Sublet #4: $60.00 Pick up & In the recent Sales and Marketing Bulletin # B23/00 introducing the “Customer Delivery: Demonstration Program”, (e-mailed to your center on September 7, 2000), each BMW motorcycle retailer was asked to arrange to pick up, complete the updates and deliver the motorcycle back to the customer and to offer the use of a demonstrator where appropriate.

Incoming search terms:

2010 Toyota Motorsports/ TRD USA Contingency Award Program

0

Filed Under (Toyota Manuals) by admin on 29-09-2011

download
To enroll in the program, complete the registration form included in the enclosed material and mail, fax or e-mail it to TRD per the instructions at the bottom of the form. Contact personnel are listed on the attached 2010 Contingency Award Guidelines sheets. These people are available to assist you throughout the year. Parts Ordering: If you are planning to order Toyota parts during 2010 you must supply us with your Visa or Master Card credit card number at the time you register in the program. There is a line on the registration form for this number. See the attached Parts Ordering Guidelines for detailed information on how to order parts. TRD is looking forward to working with each of you, and we wish you a very successful year with your racing program

Incoming search terms:

AJS NAC12 Specifications

0

Filed Under (AJS) by admin on 12-11-2010

download
Engine type ………………….. 4 stroke, twin cylinder, liquid cooled Cylinder capacity …………… 124cc Bore x stroke ………………… 44mm x 40mm (x2) Starting method ……………. Electric Transmission ………………… 5 speed gearbox, Chain drive. Clutch ………………………….. Wet, Multi-plate Ignition ……………………….. Coil CDI Battery ………………………… 12v Tyres F <> R ………………… Tubeless 90/90 – 18 <> 130/90 – 15 Suspension F / R …………… Tele’ forks / twin rear shocks Brakes F / R …………………. Twin disc / disc Fuel tank capacity …………. 18 litres Seat height …………………… 77cm (30.5″) Wheel base …………………… 151cm Max power net (approx) …. 8.5kw @ 10’500 rev/min Dry weight …………………… 153kg Max load ………………………. 150kg Noise Level (drive by) …….. 77db(A)

2010 HONDA VT1300CX Specifications/ Press Information

0

Filed Under (Honda) by admin on 18-02-2011

download
Specifications General Model VT1300CX Mold Type ED-type Engine Type Liquid-cooled SOHC 52° V-twin Displacement 1,312cm³ Bore x Stroke 89.5 x 104.3mm Compression Ratio 9.2 : 1 Max. Power Output 42.5kW / 4,250min-1 (95/1/EC) Max. Torque 107Nm / 2,250min-1 (95/1/EC) Idling Speed 900min-1 Oil Capacity 4.3 litres Fuel System Carburation PGM-FI with automatic enricher circuit Throttle Bore 38mm Aircleaner Viscous, cartridge-type mesh net filter Fuel Tank Capacity 12.8 litres Electrical System Ignition System Digital with 3-dimensional mapping, 2 sparks per cylinder Ignition Timing 8° BTDC (idle) ~ 57.7° BTDC (5,250min-1) Sparkplug Type DCPR6E (NGK); XU20EPR-U (DENSO) Starter Electric Battery Capacity 12V / 11.2AH ACG Output 381W Headlights 12V, 55W x 1 (low) / 60W x 1 (high) Drivetrain Clutch Wet, multiplate with coil spring Transmission 5-speed Primary Reduction 1.758 Gear Ratios 1 1.900 2 1.231 3 0.912 4 0.757 5 0.676 Final Reduction 2.661 Final Drive Shaft Frame Type Double-cradle; steel Chassis Dimensions (LxWxH) 2,575 x 900 x 1,150mm Wheelbase 1,805mm Caster Angle 32° Trail 90mm Turning Radius 4.1m Seat Height 678mm Ground Clearance 126mm Kerb Weight 303kg (F: 128kg; R: 175kg), *309kg (F: 131kg; R: 178kg) Max. Carrying Capacity 160kg Loaded Weight 463kg , *469kg Suspension Type Front 45mm telescopic fork with 130mm stroke and 102.4mm axle travel Rear Monoshock with adjustable rebound damping and 35-position spring preload adjustability, 95mm axle travel Wheels Type Front9-spoke cast aluminium Rear7-spoke cast aluminium Rim Size Front21M/C x MT2.15 Rear18M/C x MT6.25 Tyre Size Front90/90 R21M/C () Rear200/50 R18M/C () Tyre Pressure Front 225kPa Rear280kPa (with passenger: 280kPa) Brakes Type Front 336mm single disc with twin-piston caliper (*Combined 3-piston calliper and ABS) Rear 296mm disc with single-piston caliper (*Combined twin piston and ABS) * C-ABS version

Bridgestone 350 SPECIFICATION AND SERVICE MANUAL

0

Filed Under (Bridgestone) by admin on 03-12-2010

download
Engine ( 1 ) Type : ( 2 ) Piston Displacement : ( 3 ) Bore & Stroke : ( 4 ) Compression Ratio : ( 5 ) Max. Brake Horse Power ( 6 ) Max. Torque : ( 7 ) Air Intake System : ( 8 ) Starting System : ( 9 ) Charging System : (10) Ignition System: (11) Ignition Timing: (12) Spark Plug: (13) Carburetor: (14) Engine Lubrication: (15) Fuel: (16) Transmission Oil: Performance ( 1 ) Max. Speed : ( 2 ) Climbing Ability : ( 3 ) Fuel Consumption : ( 4 ) Min. Turning Radius : ( 5 ) Acceleration : (Standing Start 1/4 mile) (Zero to 60 mph) : ( 6 ) Braking Distance : Frame and Suspension (1) Frame: (2) Front Suspension: (3) Rear Suspension: 2-stroke, Dual Cylinders 344.9cc (21.5 cu-inches) 61 mm × 59 mm (2.40 × 2.32 inches) 9.31:1 40 HP/7500 rpm 4.0 kg-m/7000 rpm Rotary disc valve Kick Starter A. C. Generator Contact breaker gap : 0.3 – 0.4 mm (0.012 – 0.016 inches) Battery (25+1-2) degrees before T.D.C. N.G.K. B-8H, Electrode gap : 0.6 mm (0.024 inches) Type AMAL VM 26 SC Venturi: 26 mm Main Jet No.: 130 Throttle Valve Cut Away: 2.0 Air Jet : 2.0 Adjustment of Needle Jet : 0.6 Pilot Jet: 22.5Pilot Air Screw Position: 2 turns out Needle Position: 3 2 cycle oil Regular Gasoline 1.5 liter (2/5 US gal.) in transmission case SAE No. 10W/30 in all seasons or SAE No. 30 in summer and SAE No. 20 in winter 100-110 mph 1 in 2 94 mpg/25 mph (40 km/litre at 40 km/h) 2.25 m (7.38 feet) 13.7 sec 5.2 sec (Less than 12m at 50 km/h) 39 feet, at 30 mph Pipe Frame, Cradle Type Telescopic Fork with Hydraulic Damper Swinging Arm with Hydraulic Damper
Technical Data 2 Transmission ( 1 ) Clutch : ( 2 ) Transmission : ( 3 ) Gear Ratio : Dimensions and Weight ( 1 ) Overall Length : ( 2 ) Overall Width : ( 3 ) Overall Height: ( 4 ) Saddle Height : ( 5 ) Wheelbase: ( 6 ) Road Clearance : ( 7 ) Tire Size (Front) : (Rear): ( 8 ) Tire Pressure (Front) : (Rear): ( 9 ) Caster : (10) Trail: (11) Banking Angle: (12) Net Weight: (13) Fuel Tank Capacity: (14) Oil Tank Capacity : Electrical Equipment ( 1 ) Head Light : ( 2 ) Tail Light : ( 3 ) Stop Light : ( 4 ) Speedometer Lamp : ( 5 ) Tachometer Lamp : ( 6 ) Neutral Indicator Lamp : ( 7 ) 5th Gear Indicator Lamp : ( 8 ) Headlight High Beam Lamp : ( 9 ) Battery : Manual, Multiple discs, Dry type Constant mesh 6-speeds Primary (Helical Gear) 1:3.095 Gear Box: 1st 1:2.46 2nd 1:1.647 3rd 1:1.25 4th 1:1.00 5th 1:0.852 6th 1:0.759 Secondary (Chain) : 1:2.40 Total Gear Ratio : 1st 1:18.27 2nd 1:12.23 3rd 1:9.29 4th 1:7.43 5th 1:6.33 6th 1:5.64 2,110 mm (83.1 inches) 825mm (32.5 inches) 1,115 mm (43.9 inches) 810mm (31.9 inches) 1,375 mm (54.1 inches) 145 mm (5.7 inches) 3.25-19 4 ply 3.25-19 4 ply 2.0kg/cm2 (28-30 lbs/in2) 2.2 kg/cm2 (30-32 lbs/in2 ) 63° 105 mm (4.15 inches) 46° 165 kg (363 lbs) 15 litre (3-4/5 US gal.) Including 3.2 litre (4/5 US gal.) reserve 2.5 litre (3/5 US gal.) 12V-35/30W 12V-7W 12V-23W 12V-3W 12V-3W 12V-3W

Incoming search terms:

ELECTRIC SCOOTER Assembly and User's Manual

0

Filed Under (Tips and Review) by admin on 26-11-2010

download
l Output: 250W l Voltage: 24V DC l Rated current: 14.0A l Non-loading rotate speed: 3350±5% l Rated rotate speed: 2500 RPM l Rated torsion: 0.90 Battery l 12V 12Ah/5hr x (2) Qty l Sealed lead acid FEATURES & SPECIFICATIONS Performance l Maximum speed: 11 MPH l Range: Nine (9) miles l Incline rating: 40 l Net Weight: 45 lbs. l Maximum load cap.: 178 lbs. Tires l Tire Size: 2 1/4″ x 12 1/2″ l Tire Pressure: 45-50 PSI Key Ignition Headlight Turn Signals Turn Signals Brake Light Mag Wheels Footrests Working Gauges Quick Connect Charging 3
4 l One (1) SCOOT – N – GO™ l User/assembly manual l Tool kit containing 2 open ended wrenches, combination Phillips/Flathead head screwdriver l Spare fuses (30 Amp x 3 qty) l 24V Battery charger . Remove scooter from carton and all protective materials from the unit. 2. Use tool kit provided for installation FRONT WHEEL INSTALLATION: 1. Place wheel (D) in the center of the forks 2. Insert one (1) spacer (C) between wheel (D) and fork 3. Carefully insert axle (E) through fork, spacer (C), and wheel (D) 4.Insert one (1) spacer (C) on opposite side between fork and wheel (D) 5. Continue to insert axle (E) through fork on opposite side 6. Place washers (B) and nuts (A) on both ends of axle and tighten with open ended wrench provided in the tool kit. 7. Check nuts are tight and wheel moves freely Parts Needed A Nut Qty- 2 Lockwasher Qty- 2 B Spacer/ Bearing-holder Qty- 2 C D Front Wheel Qty- 1 E Axle Qty- 1 *Photos are not to scale Spacer Spacer Axle Washer Washer Nut Nut
10 ASSEMBLY INSTRUCTIONS HANDLEBARS INSTALLATION: 1. Insert handlebar post through tightening clamp 2. Insert the top of the fork base into bottom of handlebar post. 3. Line up handlebars and front wheel 4. Slide tightening clamp down to open end of fork base 5. Insert bolt and hand tightening nut into clamp and tighten. 6. Be sure that handlebars and wheel move at the same time

Automatic Transmission/ Transaxle Fluid Level Inspection Temperature Rang es

0

Filed Under (Toyota Manuals) by admin on 12-10-2011

download
For vehicles equipped witha transmission requiring the use of the overflow type automatic transmission fluid (ATF) inspection process, the A TF must be withinaspecific temperature range for accurate fluid level inspection. Inspecting the A TF outside of the specified temperature range may result in incorrectA TF fluid levels and could lead to shift quality, M.I.L. “ON”, and/or transmission damage issues. Please seethe information in this bulletin for updated A TF level inspection temperature ranges. HINT For additional information including animations and video illustrations, please seethe Technical Training course E076: “Toyota ATF Level Inspection”. NOTE Please see TSB No. TC 010-07, “World Standard Automatic Transmission Fluid”, for important tips when working with A TFWS. ©2008 ToyotaMotor Sales, USA Page 1of3
T-SB-0129-08 July9,2008 Page 2of3 Automatic Transmission/Transaxle Fluid Level Inspection Temperature Ranges Warranty Information OP CODE DESCRIPTION TIME OFP T1 T2 N/A Not Applicable to Warranty – - — Parts Information PREVIOUS PART NUMBER CURRENT PART NUMBER PART NAME QTY 00289-ATFWS Same ATFWS As needed Required Tools&Equipment

Incoming search terms:

1999 TOYOTA SEAT BELT EXTENDERS REMOVAL AND INSTALLATION

0

Filed Under (Toyota Manuals) by admin on 11-10-2011

download
increase the length of their seat belts may obtain Seat Belt Extenders at no cost through their local Toyota dealer. The extender is available in 6 inch, 9 inch, 12 inch, 15 inch and 18 inch lengths. The extender is available only in black . Owners are informed of the seat belt extender availability through the Toyota Owner’s Manual included in each vehicle. The customer (individual requiring the extender) must visit a Toyota dealership to have the required measurements made and to complete the seat belt extender worksheet. The worksheet will allow the proper fitting and selection of a seat belt extender for the customer. The dealership personnel should then determine the applicable part number and place a Critical Order through the TDN Parts Network. The dealership service department should complete the affixed Seat Belt Extender Label and review the “owner instruction sheet” with the customer. The dealership should give a copy of the completed worksheet to the customer and keep the original in the customer’s file. To assure utmost owner satisfaction, it is recommended that a dealership designate one person to coordinate all activities related to the seat belt extender issue. From past sales history, it is recommended that dealerships do not stock Seat belt extenders due to low demand and the need for customer fitting

2010 Harley-Davidson FLHR Road King front and rear 4-piston braking system Installation

0

Filed Under (Harley Davidson) by admin on 31-10-2010

download
in Vivid Black with blue and silver pinstripes, six-speed. Air-cooled, Twin Cam 96™ engine with Electronic Sequential Port Fuel Injection (ESPFI), ABS, security system, cast wheels with independent front and rear 4-piston braking system. Motorcycle generously donated by Harley-Davidson Motor Company Police & Fleet Sales. MSRP excludes all taxes title/documentary fees, registration, tags, dealer prep, labor and installation charges, insurance, optional equipment and accessories, certificate of compliance or non-compliance fees, and finance charges. Delivery must be coordinated through Rockville Harley-Davidson by November 30, 2010. Winner is responsible for any applicable fees above. 6,000 tickets printed. Odds of winning are 1:6,000. Ticket holder need not be present to win. Licensed by the D.C. Lottery and Charitable Games Control Board. Must be 18 years or older to win. No substitutes, return for cash, or other models. As per IRS tax code, amounts paid for chances in a raffle do not qualify as a deductible charitable contribution. Taxes on prizes are the responsibility of the winner. Harley-Davidson is proud to be a sponsor of the National Law Enforcement Officers Memorial Fund. Harley-Davidson Motor Company is a prize provider only, and Harley-Davidson, Inc., and Harley-Davidson Motor Company have no responsibility regarding conduct or administration of the raffle.

Incoming search terms:

Incoming search terms: