suppliersmsa hinet net mail

You search Auto repair manual PDF suppliersmsa hinet net mail, if there are search results will appear below. If search results do not exist, please search by others keyword.





HONDA TRX 450R Nerf Bar INSTALLATION AND REMOVAL INSTRUCTIONS

0

Filed Under (Honda) by admin on 23-12-2011

download
Parts List: Quantity Part 1 Nerf Bar Left 1 Nerf Bar Right 2 Hex Head Bolt, M10 x 70mm 2 Flat Washer, M10 2 Hex Head Bolt, M6 x 16mm 2 Flat Washer, M6 4 Net Clips 1 Net Set 2 Footpeg Washer 2. Preparation: a) Set/Lock rear parking brake on bike, turn gas petcock to ‘Off’ position and stand bike upright so that it is sitting on the rear grab bar. Make sure vehicle is secure and will not fall over while installing your new Nerf Bars. 3. Installation: a) Install Hardware & Web Strap per photo’s: NOTE: Loosely install all hardware and tighten when complete. Torque M10 Bolts @ 30 ft. lbs. Torque M6 Bolts @ 8 ft. lbs. REMOVE & REUSE OEM BOLTS TO ATTACH FOOT PEG. ATTACH FOOT PEG TO NERF SUPPORT USING M6 X 16MM HEAD BOLT AND WASHER. ATTACH NET CLIPS NOTE: FIRST SLIDE LEFT NERF WELDED TUBE INTO RIGHT NERF TUBE THEN, LOOSELY ATTACH FRONT NERF BARS TO THE A-ARMS USING OEM NUTS AND SUPPLIED M10 X 70MM BOLTS AND WASHERS

Incoming search terms:

2010 Toyota Motorsports/ TRD USA Contingency Award Program

0

Filed Under (Toyota Manuals) by admin on 29-09-2011

download
To enroll in the program, complete the registration form included in the enclosed material and mail, fax or e-mail it to TRD per the instructions at the bottom of the form. Contact personnel are listed on the attached 2010 Contingency Award Guidelines sheets. These people are available to assist you throughout the year. Parts Ordering: If you are planning to order Toyota parts during 2010 you must supply us with your Visa or Master Card credit card number at the time you register in the program. There is a line on the registration form for this number. See the attached Parts Ordering Guidelines for detailed information on how to order parts. TRD is looking forward to working with each of you, and we wish you a very successful year with your racing program

Incoming search terms:

ELECTRIC SCOOTER Assembly and User's Manual

0

Filed Under (Tips and Review) by admin on 26-11-2010

download
l Output: 250W l Voltage: 24V DC l Rated current: 14.0A l Non-loading rotate speed: 3350±5% l Rated rotate speed: 2500 RPM l Rated torsion: 0.90 Battery l 12V 12Ah/5hr x (2) Qty l Sealed lead acid FEATURES & SPECIFICATIONS Performance l Maximum speed: 11 MPH l Range: Nine (9) miles l Incline rating: 40 l Net Weight: 45 lbs. l Maximum load cap.: 178 lbs. Tires l Tire Size: 2 1/4″ x 12 1/2″ l Tire Pressure: 45-50 PSI Key Ignition Headlight Turn Signals Turn Signals Brake Light Mag Wheels Footrests Working Gauges Quick Connect Charging 3
4 l One (1) SCOOT – N – GO™ l User/assembly manual l Tool kit containing 2 open ended wrenches, combination Phillips/Flathead head screwdriver l Spare fuses (30 Amp x 3 qty) l 24V Battery charger . Remove scooter from carton and all protective materials from the unit. 2. Use tool kit provided for installation FRONT WHEEL INSTALLATION: 1. Place wheel (D) in the center of the forks 2. Insert one (1) spacer (C) between wheel (D) and fork 3. Carefully insert axle (E) through fork, spacer (C), and wheel (D) 4.Insert one (1) spacer (C) on opposite side between fork and wheel (D) 5. Continue to insert axle (E) through fork on opposite side 6. Place washers (B) and nuts (A) on both ends of axle and tighten with open ended wrench provided in the tool kit. 7. Check nuts are tight and wheel moves freely Parts Needed A Nut Qty- 2 Lockwasher Qty- 2 B Spacer/ Bearing-holder Qty- 2 C D Front Wheel Qty- 1 E Axle Qty- 1 *Photos are not to scale Spacer Spacer Axle Washer Washer Nut Nut
10 ASSEMBLY INSTRUCTIONS HANDLEBARS INSTALLATION: 1. Insert handlebar post through tightening clamp 2. Insert the top of the fork base into bottom of handlebar post. 3. Line up handlebars and front wheel 4. Slide tightening clamp down to open end of fork base 5. Insert bolt and hand tightening nut into clamp and tighten. 6. Be sure that handlebars and wheel move at the same time

AJS NAC12 Specifications

0

Filed Under (AJS) by admin on 12-11-2010

download
Engine type ………………….. 4 stroke, twin cylinder, liquid cooled Cylinder capacity …………… 124cc Bore x stroke ………………… 44mm x 40mm (x2) Starting method ……………. Electric Transmission ………………… 5 speed gearbox, Chain drive. Clutch ………………………….. Wet, Multi-plate Ignition ……………………….. Coil CDI Battery ………………………… 12v Tyres F <> R ………………… Tubeless 90/90 – 18 <> 130/90 – 15 Suspension F / R …………… Tele’ forks / twin rear shocks Brakes F / R …………………. Twin disc / disc Fuel tank capacity …………. 18 litres Seat height …………………… 77cm (30.5″) Wheel base …………………… 151cm Max power net (approx) …. 8.5kw @ 10’500 rev/min Dry weight …………………… 153kg Max load ………………………. 150kg Noise Level (drive by) …….. 77db(A)

2010 HONDA VT1300CX Specifications/ Press Information

0

Filed Under (Honda) by admin on 18-02-2011

download
Specifications General Model VT1300CX Mold Type ED-type Engine Type Liquid-cooled SOHC 52° V-twin Displacement 1,312cm³ Bore x Stroke 89.5 x 104.3mm Compression Ratio 9.2 : 1 Max. Power Output 42.5kW / 4,250min-1 (95/1/EC) Max. Torque 107Nm / 2,250min-1 (95/1/EC) Idling Speed 900min-1 Oil Capacity 4.3 litres Fuel System Carburation PGM-FI with automatic enricher circuit Throttle Bore 38mm Aircleaner Viscous, cartridge-type mesh net filter Fuel Tank Capacity 12.8 litres Electrical System Ignition System Digital with 3-dimensional mapping, 2 sparks per cylinder Ignition Timing 8° BTDC (idle) ~ 57.7° BTDC (5,250min-1) Sparkplug Type DCPR6E (NGK); XU20EPR-U (DENSO) Starter Electric Battery Capacity 12V / 11.2AH ACG Output 381W Headlights 12V, 55W x 1 (low) / 60W x 1 (high) Drivetrain Clutch Wet, multiplate with coil spring Transmission 5-speed Primary Reduction 1.758 Gear Ratios 1 1.900 2 1.231 3 0.912 4 0.757 5 0.676 Final Reduction 2.661 Final Drive Shaft Frame Type Double-cradle; steel Chassis Dimensions (LxWxH) 2,575 x 900 x 1,150mm Wheelbase 1,805mm Caster Angle 32° Trail 90mm Turning Radius 4.1m Seat Height 678mm Ground Clearance 126mm Kerb Weight 303kg (F: 128kg; R: 175kg), *309kg (F: 131kg; R: 178kg) Max. Carrying Capacity 160kg Loaded Weight 463kg , *469kg Suspension Type Front 45mm telescopic fork with 130mm stroke and 102.4mm axle travel Rear Monoshock with adjustable rebound damping and 35-position spring preload adjustability, 95mm axle travel Wheels Type Front9-spoke cast aluminium Rear7-spoke cast aluminium Rim Size Front21M/C x MT2.15 Rear18M/C x MT6.25 Tyre Size Front90/90 R21M/C () Rear200/50 R18M/C () Tyre Pressure Front 225kPa Rear280kPa (with passenger: 280kPa) Brakes Type Front 336mm single disc with twin-piston caliper (*Combined 3-piston calliper and ABS) Rear 296mm disc with single-piston caliper (*Combined twin piston and ABS) * C-ABS version

Bridgestone 350 SPECIFICATION AND SERVICE MANUAL

0

Filed Under (Bridgestone) by admin on 03-12-2010

download
Engine ( 1 ) Type : ( 2 ) Piston Displacement : ( 3 ) Bore & Stroke : ( 4 ) Compression Ratio : ( 5 ) Max. Brake Horse Power ( 6 ) Max. Torque : ( 7 ) Air Intake System : ( 8 ) Starting System : ( 9 ) Charging System : (10) Ignition System: (11) Ignition Timing: (12) Spark Plug: (13) Carburetor: (14) Engine Lubrication: (15) Fuel: (16) Transmission Oil: Performance ( 1 ) Max. Speed : ( 2 ) Climbing Ability : ( 3 ) Fuel Consumption : ( 4 ) Min. Turning Radius : ( 5 ) Acceleration : (Standing Start 1/4 mile) (Zero to 60 mph) : ( 6 ) Braking Distance : Frame and Suspension (1) Frame: (2) Front Suspension: (3) Rear Suspension: 2-stroke, Dual Cylinders 344.9cc (21.5 cu-inches) 61 mm × 59 mm (2.40 × 2.32 inches) 9.31:1 40 HP/7500 rpm 4.0 kg-m/7000 rpm Rotary disc valve Kick Starter A. C. Generator Contact breaker gap : 0.3 – 0.4 mm (0.012 – 0.016 inches) Battery (25+1-2) degrees before T.D.C. N.G.K. B-8H, Electrode gap : 0.6 mm (0.024 inches) Type AMAL VM 26 SC Venturi: 26 mm Main Jet No.: 130 Throttle Valve Cut Away: 2.0 Air Jet : 2.0 Adjustment of Needle Jet : 0.6 Pilot Jet: 22.5Pilot Air Screw Position: 2 turns out Needle Position: 3 2 cycle oil Regular Gasoline 1.5 liter (2/5 US gal.) in transmission case SAE No. 10W/30 in all seasons or SAE No. 30 in summer and SAE No. 20 in winter 100-110 mph 1 in 2 94 mpg/25 mph (40 km/litre at 40 km/h) 2.25 m (7.38 feet) 13.7 sec 5.2 sec (Less than 12m at 50 km/h) 39 feet, at 30 mph Pipe Frame, Cradle Type Telescopic Fork with Hydraulic Damper Swinging Arm with Hydraulic Damper
Technical Data 2 Transmission ( 1 ) Clutch : ( 2 ) Transmission : ( 3 ) Gear Ratio : Dimensions and Weight ( 1 ) Overall Length : ( 2 ) Overall Width : ( 3 ) Overall Height: ( 4 ) Saddle Height : ( 5 ) Wheelbase: ( 6 ) Road Clearance : ( 7 ) Tire Size (Front) : (Rear): ( 8 ) Tire Pressure (Front) : (Rear): ( 9 ) Caster : (10) Trail: (11) Banking Angle: (12) Net Weight: (13) Fuel Tank Capacity: (14) Oil Tank Capacity : Electrical Equipment ( 1 ) Head Light : ( 2 ) Tail Light : ( 3 ) Stop Light : ( 4 ) Speedometer Lamp : ( 5 ) Tachometer Lamp : ( 6 ) Neutral Indicator Lamp : ( 7 ) 5th Gear Indicator Lamp : ( 8 ) Headlight High Beam Lamp : ( 9 ) Battery : Manual, Multiple discs, Dry type Constant mesh 6-speeds Primary (Helical Gear) 1:3.095 Gear Box: 1st 1:2.46 2nd 1:1.647 3rd 1:1.25 4th 1:1.00 5th 1:0.852 6th 1:0.759 Secondary (Chain) : 1:2.40 Total Gear Ratio : 1st 1:18.27 2nd 1:12.23 3rd 1:9.29 4th 1:7.43 5th 1:6.33 6th 1:5.64 2,110 mm (83.1 inches) 825mm (32.5 inches) 1,115 mm (43.9 inches) 810mm (31.9 inches) 1,375 mm (54.1 inches) 145 mm (5.7 inches) 3.25-19 4 ply 3.25-19 4 ply 2.0kg/cm2 (28-30 lbs/in2) 2.2 kg/cm2 (30-32 lbs/in2 ) 63° 105 mm (4.15 inches) 46° 165 kg (363 lbs) 15 litre (3-4/5 US gal.) Including 3.2 litre (4/5 US gal.) reserve 2.5 litre (3/5 US gal.) 12V-35/30W 12V-7W 12V-23W 12V-3W 12V-3W 12V-3W

Incoming search terms:

Motorcycle Carburetor Rebuilding

0

Filed Under (Tips and Review) by admin on 22-11-2010

download
Experience has shown that when a customer disassembles, it creates a storage issue for us as well as parts are generally missing. The disassembly usually costs us extra hours of work during the rebuild. The only acceptable part to be removed from an assembly is the cable bracket if it is fragile and in danger of breaking during shipping. All other parts should be where they belong. Rebuild Service Prices: If your carburetor type doesn’t appear below or you are not sure, please send a note to our e-mail for pricing details. Military rebates are available to honor our service men and women! Active Duty military, contact us for a rebate. Please include your service, pay grade and current duty station when you contact us.

BMW Motorcycles F 650 GS Dakar fuel tank replacement

0

Filed Under (BMW) by admin on 12-11-2010

download
Your center has been requested in a recent e-mail, to forward VIN, color Information: and status information on all F 650 GS(A) and Dakar models remaining in your inventory. Fuel tanks, together with the appropriate colored trim pieces, will be forwarded to your center for each bike in your inventory as replacement parts arrive in BMW NA inventory. Warranty Please enter a warranty campaign claim , encompassing the following Reimbursement: Work Package information, when claiming reimbursement for the updates called for in this bulletin. Even though there is no charge for the parts, a sublet of $60.00 will be applied to each claim. This sublet amount is intended as a combination of both the handling and as reimbursement for incidental items that may be required in the replacement of the fuel tank. Work Package #1 is to be used in the replacement of all F 650 GS(A) and Dakar model fuel tanks. Defect Code: 00 00 16 1100 Description: Fuel Tank – Leaking Flat Rate Code: 00 60 059 Description: Remove and reinstall fuel tank (USA only) FRU: 12 FRU Sublet #4: $60.00 Pick up & In the recent Sales and Marketing Bulletin # B23/00 introducing the “Customer Delivery: Demonstration Program”, (e-mailed to your center on September 7, 2000), each BMW motorcycle retailer was asked to arrange to pick up, complete the updates and deliver the motorcycle back to the customer and to offer the use of a demonstrator where appropriate.

Incoming search terms:

2001-2002 HONDA GL1800/A CD Changer Replacement

0

Filed Under (Honda) by admin on 03-03-2011

download
2001-2002 GL1800/A CD Changer Replacement ORDERING AND REPLACING THE CD CHANGER 1. Before calling the CD Changer Order Desk, have the following information ready: • VIN • Failure Information (i.e., symptom) • Warranty Status 2. To order, call the CD Changer Order Desk toll free: (888) 997-7278 . The CD Changer Order Desk hours are Monday thru Friday, 8:30am – 8:00pm EST. Part Number: 08A06-MCA-100RM Honda Code: 7097009 3. After calling the CD Changer Order Desk, an exchange CD Changer will be shipped overnight (freight prepaid). 4. Replace the faulty CD Changer with the exchange unit (see REPAIR PROCEDURE ). DO NOT remove the faulty CD Changer until you receive the exchange unit. DO NOT ATTEMPT TO REMOVE ANY STUCK CD’S. CHANGERS DAMAGED IN THIS WAY WILL BE RETURNED TO THE DEALER AND NO CORE CREDIT WILL BE ALLOWED. You will be billed $300.00 for the replacement unit. You must return the faulty CD Changer for a core credit and file a warranty claim to receive your total reimbursement (see TRANSACTION SUMMARY on page 3 for details). REPAIR PROCEDURE 1. Refer to the Installation Instructions included with the replacement CD Changer. 2. NOTE: You MUST remove the shipping bracket from the replacement unit before you complete the installation. If a CD is stuck inside the faulty unit, leave it there : • The vendor needs it for diagnosing and testing. • If you try to remove it, you’ll damage the unit. • The vendor will return the unit if it has been damaged during attempted CD removal. Fill in the customer information on the Audio System Diagnosis and Core Return form. The vendor will remove the CD and mail it back to the customer. IDENTIFICATION No identification is necessary for this repair

1997 Honda CBR 1000 F specifications

0

Filed Under (Honda) by admin on 03-11-2010

download
Front brakes: Dual disc Rear brakes: Single disc Speed and acceleration Top speed: 255.0 km/h (158.4 mph) Power/weight ratio: 0.5745 HP/kg Other specifications Further information Parts and accessories Check out parts and accessories from our partners. Ask questions Join the 97 Honda CBR 1000 F discussion group Insurance, loans, tests Search the web for dealers, loan and insurance costs, tests, customizing, etc. Related bikes List related bikes for comparison of specs Buying a bike starts at Bikez Get a list of related motorbikes before you buy this Honda. Inspect technical data. Look at photos. Read the riders’ comments at the bike’s discussion group. And check out the bike’s reliability, repair costs, etc. Show any 1997 Honda CBR 1000 F for sale on our Bikez.biz Motorcycle Classifieds. You can also sign up for e-mail notification when such bikes are advertised in the future. And advertise your old MC for sale. Our efficient ads are free. You are also welcome to read and submit motorcycle reviews. Rating sample for this Honda bike Value for money for the 1997 Honda CBR 1000 F: (67.1 out of 100) Click here for complete rating. You can also compare bikes. Pictures, trademarks and logos of third parties are exclusive property of the respective owners. Technical specifications are subject to change without notice. Bikez.com has been developed by low-cost software development company ObjectLabs

Incoming search terms:

Incoming search terms: