tyre mail

You search Auto repair manual PDF tyre mail, if there are search results will appear below. If search results do not exist, please search by others keyword.





Removal and Fitting of Tyres

0

Filed Under (Tips and Review) by admin on 17-11-2010

download
General Advice Tyres are the only parts of the motorcycle which are in contact with the road. Safety in acceleration, braking, steering and cornering all depend on a relatively small area of road contact. It is therefore of paramount importance that tyres should be maintained in good condition at all times and that when the time comes to change them suitable replacements are fitted. The original tyres for a motorcycle are determined by joint consultation between the motorcycle and tyre manufacturers and take into account all aspects of operation. It is recommended that changes in tyre size or type (construction) should not be undertaken without seeking advice from the motorcycle or tyre manufacturers, as the effect on motorcycle handling, safety and clearances must be taken into account. The tyre industry has long recognised the consumer’s role in the regular care and maintenance of their tyres. The point at which a tyre is replaced is a decision for which the owner of

Incoming search terms:

Wangye WY250T SPECIFICATION AND USER MANUAL

0

Filed Under (Wangye) by admin on 25-11-2010

download
item Data Item Data L×W×H mm 2015×680×1210 Front Tyre T 130/160-13 Wheelbase mm 1350 Rear Tyre 110/180-10 Ground Clearance mm 101 Air Pressure of Fr tyre 200 kPa Dry weight kg 160kg Air Pressure of Rr tyre 250 kPa Max Load kg 150kg Transmission system CVT Turning angle of steering handle ≤48° Ratio 5.12~15.05 Brake base mm ≤7(30km/h) Engine Type 169MM Single Cylinder、4 stroke、 water-cooled Max Speed km/h ≥85km/h Bore×stroke mm 69×66.8 Consumption L/100km ≤3.1L/100km Displacement ml 249.8 Climb ability º ≥18 Clutch automatically centrifugal Light vertical angle -1.3% Fuel tank L 7 Starting system Electric Battery 12V 9Ah – 4 – Table 2 Item specification Item Specification Lubricative System Press & splash Ignition System CDI Rated Power 10.5kW/6500(r/min) Fuse 15 A Max Torque 17.6N.m/5000(r/min) Front light 12V 35W/35W×2 Compression ratio 10.01 ∶ Tail/stop light 12V P21/5W Spark Plug Model DPR7EA(NGK) 、D7RTC或DPR6EA License light 12V 5W Spark plug gap mm 0.6~0.7 mm Turning light 12V 10W×4 Gap of valve 0.1(cold) Fuel RQ90 above Idling speed (1500±150)r/min Gearbox oil SAE 80W/90 Engine oil SF SAE 10W/40 capacity of gear box 0.18L Capacity of engine oil 1.1L

Incoming search terms:

2010 Toyota Motorsports/ TRD USA Contingency Award Program

0

Filed Under (Toyota Manuals) by admin on 29-09-2011

download
To enroll in the program, complete the registration form included in the enclosed material and mail, fax or e-mail it to TRD per the instructions at the bottom of the form. Contact personnel are listed on the attached 2010 Contingency Award Guidelines sheets. These people are available to assist you throughout the year. Parts Ordering: If you are planning to order Toyota parts during 2010 you must supply us with your Visa or Master Card credit card number at the time you register in the program. There is a line on the registration form for this number. See the attached Parts Ordering Guidelines for detailed information on how to order parts. TRD is looking forward to working with each of you, and we wish you a very successful year with your racing program

Incoming search terms:

2011 HONDA XL1000V Specifications / Press Information

0

Filed Under (Honda) by admin on 18-02-2011

download
Specifications – XL1000V / XL1000V ABS (ED-type) ENGINE Type Liquid-cooled 4-stroke 8-valve DOHC 90° V- twin Displacement 996cm 3 Bore  Stroke 98  66mm Compression Ratio 9.8 : 1 Max. Power Output 69kW/7,500min -1 (95/1/EC) Max. Torque 98Nm/6,000min -1 (95/1/EC) Idling Speed 1,300min -1 Oil Capacity 4.1 litres FUEL SYSTEM Carburation PGM-FI electronic fuel injection Throttle Bore 42mm Aircleaner Viscous, cartridge-type paper filter Fuel Tank Capacity 25 litres (including 4-litre warning light reserve) ELECTRICAL SYSTEM Ignition System Computer-controlled digital transistorised with electronic advance Ignition Timing 15° BTDC (idle) ~ 55° BTDC (5,100min -1 ) Sparkplug Type IJR8B9 (NGK) Press information for 2011 XL1000V 6 Starter Electric Battery Capacity 12V/18AH ACG Output 434W Headlight 12V 60W  2 (low) / 55W  2 (high) DRIVETRAIN Clutch Wet, multiplate with coil springs Clutch Operation Mechanical; cable-actuated Transmission Type 6-speed Primary Reduction 1.682 (44/74) Gear Ratios 1 2.571 (14/36) 2 1.684 (19/32) 3 1.292 (24/31) 4 1.100 (30/33) 5 0.969 (32/31) 6 0.853 (34/29) Final Reduction 2.938 (16/47) Final Drive O-ring sealed chain FRAME Type Steel tube CHASSIS DIMENSIONS Dimensions (LWH) 2,300  930  1,465mm Wheelbase 1,560mm Caster Angle 27° 30′ Press information for 2011 XL1000V 7 Trail 110mm Turning Radius 2.58m Seat Height 838mm Ground Clearance 181mm Kerb Weight 268.7kg (F: 126.3kg; R: 142.4kg) *276.7kg (F: 130kg; R: 146.7kg) Max. Carrying Capacity 201kg Loaded Weight 469.7 kg *477.7 kg SUSPENSION Front 43mm telescopic fork, 155mm axle travel Rear Pro-Link damper, 145mm axle travel WHEELS Type Front Hollow-section triple-spoke cast aluminium Rear Hollow-section triple-spoke cast aluminium Rim Size Front 19M/C  MT2.50 Rear 17M/C  MT4.00 Tyre Size Front 110/80 R19M/C (59H) Rear 150/70 R17M/C (69H) Tyre Pressure Front 250kPa Rear 250kPa (with passenger: 280kPa) Press information for 2011 XL1000V 8 BRAKES Front 296  4.5mm dual hydraulic disc with Combined 3-piston calipers (*ABS) and sintered metal pads Rear 256  5mm hydraulic disc with Combined 3- piston caliper (*ABS) and sintered metal pads * Combined-ABS version All specifications are provisional and subject to change without notice

Rokon Motorcycle Trail-Breaker SPECIFICATION

0

Filed Under (Rokon) by admin on 23-11-2010

Model: Rokon Trail-Breaker
Engine and transmission
Displacement: 172.00 ccm (10.50 cubic inches)
Engine type: Single cylinder, four-stroke
Power: 6.60 HP (4.8 kW)) @ 4000 RPM
Fuel system: Carburettor
Ignition: Electronic Magneto
Cooling system: Liquid
Gearbox: 3-speed
Fuel consumption: 0.45 litres/100 km (222.2 km/l or 522.71 mpg)
Greenhouse gases: 10.4 CO2 g/km. (CO2 – Carbon dioxide emission)
Exhaust system: Muffler with US Forestry approved spark arrestor
Chassis, suspension, brakes and wheels
Front tyre dimensions: 5.90-15
Rear tyre dimensions: 5.90-15
Front brakes: Single disc
Rear brakes: Single disc
Physical measures and capacities
Dry weight: 94.3 kg (208.0 pounds)
Power/weight ratio: 0.0700 HP/kg
Overall height: 762 mm (30.0 inches)
Overall length: 2,007 mm (79.0 inches)
Overall width: 787 mm (31.0 inches)
Ground clearance: 381 mm (15.0 inches)
Wheelbase: 1,295 mm (51.0 inches)
Fuel capacity: 10.18 litres (2.69 gallons)

Incoming search terms:

2010 HONDA VT1300CX Specifications/ Press Information

0

Filed Under (Honda) by admin on 18-02-2011

download
Specifications General Model VT1300CX Mold Type ED-type Engine Type Liquid-cooled SOHC 52° V-twin Displacement 1,312cm³ Bore x Stroke 89.5 x 104.3mm Compression Ratio 9.2 : 1 Max. Power Output 42.5kW / 4,250min-1 (95/1/EC) Max. Torque 107Nm / 2,250min-1 (95/1/EC) Idling Speed 900min-1 Oil Capacity 4.3 litres Fuel System Carburation PGM-FI with automatic enricher circuit Throttle Bore 38mm Aircleaner Viscous, cartridge-type mesh net filter Fuel Tank Capacity 12.8 litres Electrical System Ignition System Digital with 3-dimensional mapping, 2 sparks per cylinder Ignition Timing 8° BTDC (idle) ~ 57.7° BTDC (5,250min-1) Sparkplug Type DCPR6E (NGK); XU20EPR-U (DENSO) Starter Electric Battery Capacity 12V / 11.2AH ACG Output 381W Headlights 12V, 55W x 1 (low) / 60W x 1 (high) Drivetrain Clutch Wet, multiplate with coil spring Transmission 5-speed Primary Reduction 1.758 Gear Ratios 1 1.900 2 1.231 3 0.912 4 0.757 5 0.676 Final Reduction 2.661 Final Drive Shaft Frame Type Double-cradle; steel Chassis Dimensions (LxWxH) 2,575 x 900 x 1,150mm Wheelbase 1,805mm Caster Angle 32° Trail 90mm Turning Radius 4.1m Seat Height 678mm Ground Clearance 126mm Kerb Weight 303kg (F: 128kg; R: 175kg), *309kg (F: 131kg; R: 178kg) Max. Carrying Capacity 160kg Loaded Weight 463kg , *469kg Suspension Type Front 45mm telescopic fork with 130mm stroke and 102.4mm axle travel Rear Monoshock with adjustable rebound damping and 35-position spring preload adjustability, 95mm axle travel Wheels Type Front9-spoke cast aluminium Rear7-spoke cast aluminium Rim Size Front21M/C x MT2.15 Rear18M/C x MT6.25 Tyre Size Front90/90 R21M/C () Rear200/50 R18M/C () Tyre Pressure Front 225kPa Rear280kPa (with passenger: 280kPa) Brakes Type Front 336mm single disc with twin-piston caliper (*Combined 3-piston calliper and ABS) Rear 296mm disc with single-piston caliper (*Combined twin piston and ABS) * C-ABS version

2011 HONDA NT700V Specifications/ Press Information

0

Filed Under (Honda) by admin on 18-02-2011

download
Press information for 2011 NT700V 5 Specifications – NT700V (ED-type) ENGINE Type Liquid-cooled 4-stroke 8-valve SOHC 52° V- twin Displacement 680cm 3 Bore  Stroke 81  66mm Compression Ratio 10 : 1 Max. Power Output 48.3kW/8,000min -1 (95/1/EC) Max. Torque 66.2Nm/6,500min -1 (95/1/EC) Idling Speed 1,200min -1 Oil Capacity 3.2 litres FUEL SYSTEM Carburation PGM-FI electronic fuel injection Throttle Bore 40mm Aircleaner Dry, cartridge-type paper filter Fuel Tank Capacity 19.7 litres (including 3.5-litre reserve) Fuel consumption 20.1 km/l (WMTC Mode #) ELECTRICAL SYSTEM Ignition System Digital transistorised with electronic advance Ignition Timing 10° BTDC (idle) ~ 45° BTDC (8,900min -1 ) Sparkplug Type CPR8EA-9 (NGK) Starter Electric Press information for 2011 NT700V 6 Battery Capacity 12V/11.2AH ACG Output 438W Headlight 12V; 55W  1 (low) / 55W  1 (high) DRIVETRAIN Clutch Wet, multiplate with coil springs Clutch Operation Mechanical; cable-actuated Transmission Type 5-speed Primary Reduction 1.763 (67/38) Gear Ratios 1 2.571 (36/14) 2 1.688 (27/16) 3 1.300 (26/20) 4 1.084 (29/27) 5 0.923 (24/26) Final Reduction 3.091 (34/11) Final Drive Enclosed shaft FRAME Type Diamond; steel twin-spar CHASSIS Dimensions (LWH) 2,218  810  1,320mm (Raised windscreen: 1,491mm) Wheelbase 1,476mm Caster Angle 28° 50′ Trail 115mm
Press information for 2011 NT700V 7 Turning Radius 3.2m Seat Height 805mm Ground Clearance 156mm Kerb Weight 254kg (F: 112kg; R: 142kg) *257kg (F: 113kg; R: 144kg) Max. Carrying Capacity 197kg Loaded Weight 451kg *454kg SUSPENSION Type Front 41mm telescopic fork, 115mm axle travel Rear Single damper with adjustable preload, 122.5mm axle travel WHEELS Type Front S-section triple-spoke cast aluminium Rear S-section triple-spoke cast aluminium Rim Size Front 17  MT3.5 Rear 17  MT4.5 Tyre Size Front 120/70 ZR17 (58W) Rear 150/70 ZR17 (69W) Tyre Pressure Front 250kPa Rear 290kPa (290kPa with passenger) BRAKES Type Front 296  4.5mm dual hydraulic disc with Combined 3-piston calipers and sintered metal pads Press information for 2011 NT700V 8 Rear 276  6mm hydraulic disc with dual-piston caliper and sintered metal pads (*and Combined ABS) *Combined-ABS version

2009 HONDA CBF1000 Specifications/ Press Information

0

Filed Under (Honda) by admin on 18-02-2011

download
Specifications General Model CBF1000 Mold Type ED-type Engine Type Liquid-cooled 4-stroke 16-valve DOHC inline-4 Displacement 998cm³ Bore x Stroke 75 x 56.5mm Compression Ratio 11 : 1 Max. Power Output 72kW / 8,000min-1 (95/1/EC) Max. Torque 93Nm / 6,500min-1 (95/1/EC) Idling Speed 1,200min-1 Oil Capacity 3.6 litres Fuel System Carburation PGM-FI electronic fuel injection Throttle Bore 36mm Aircleaner Dry, cartridge-type paper filter Fuel Tank Capacity 19 litres (including 4-litre reserve) Electrical System Ignition System Computer-controlled digital transistorised with electronic advance Ignition Timing 5° BTDC (idle) ~ 45° BTDC (7,500min-1) Sparkplug Type NGK: CR8EH-9; ND: U24FER9 Starter Electric Battery Capacity 12V / 8.6AH ACG Output 330W Headlights 12V, 55W x 1 (low) / 55W x 2 (high) Drivetrain Clutch Wet, multiplate with coil springs Clutch Operation Hydraulic Transmission 6-speed Primary Reduction 1.604 (77/48) Gear Ratios 1 2.714 (38/14) 2 1.941 (33/17) 3 1.579 (30/19) 4 1.363 (30/22) 5 1.217 (28/23) 6 1.115 (29/26) Final Reduction 2.687 (43/16) Final Drive #530 O-ring sealed chain Frame Type Mono-backbone; rectangular-section steel tube Chassis Dimensions (LxWxH) 2,156 x 781 x 1,138mm Wheelbase 1,480mm Caster Angle 26° Trail 110mm Turning Radius 2.8m Seat Height 795mm (±15mm) Ground Clearance 130mm Kerb Weight 242kg (F: 118kg; R: 124kg), *250kg (F: 120kg; R: 130kg) Max. Carrying Capacity 195kg Loaded Weight 437kg , *445kg Suspension Type Front 41mm cartridge-type telescopic fork, 120mm axle travel Rear Pro-Link with gas-charged HMAS damper, 120mm axle travel Wheels Type FrontHollow-section 6-spoke cast aluminium RearHollow-section 6-spoke cast aluminium Rim Size Front17M/C x MT3.50 Rear17M/C x MT5.00 Tyre Size Front120/70 ZR17M/C (58W) Rear160/60 ZR17M/C (69W) Tyre Pressure Front 250kPa Rear 290kPa Brakes Type Front 296 x 4.5mm dual hydraulic disc with 4-piston (*Combined 3-piston) calipers, floating rotors (*ABS) and sintered metal pads Rear 240 x 6mm hydraulic disc with single-piston (*3-piston) caliper (*ABS) and sintered metal pads

2007 HONDA SILVER WING Specifications / PRESS INFORMATION

0

Filed Under (Honda) by admin on 18-02-2011

download
Specifications Silver Wing ED-type Engine Type Liquid-cooled 4-stroke 8-valve DOHC parallel twin Displacement 582cm³ Bore x Stroke 72 x 71.5mm Compression Ratio 10.2 : 1 Max. Power Output 37kW / 7,000min-1 (95/1/EC) Max. Torque 54Nm / 5,500min-1 (95/1/EC) Idling Speed 1,300min-1 Oil Capacity 2.6 litres Fuel System Carburation PGM-FI electronic fuel injection Throttle Bore 32mm Aircleaner Dry, cartridge-type paper filter Fuel Tank Capacity 16 litres (including 3.5-litre reserve) Electrical System Ignition System Computer-controlled digital transistorised with electronic advance Ignition Timing 12° BTDC (idle) ~ 43° BTDC (8,250min-1) Sparkplug Type CR8EH-9 (NGK); U24FER9 (ND) Starter Electric Battery Capacity 12V / 11AH ACG Output 450W Headlights 12V, 55W x 1 (low) / 55W x 1 (high) Drivetrain Clutch Automatic; centrifugal Transmission V-Matic Final Reduction 6.016 Final Drive V-belt Belt Converter Ratios 2.1 ~ 0.85 Frame Type Centre backbone; steel tube 2/3 Chassis Dimensions (LxWxH) 2,275 x 770 x 1,430mm Wheelbase 1,595mm Caster Angle 28° 30′ Trail 105mm Turning Radius 2.9m Seat Height 740mm Ground Clearance 140mm Dry Weight 218kg (*229.6kg) Kerb Weight 242kg (F: 96.7kg; R: 145.3kg), *247kg (F: 98kg; R: 149kg) Max. Carrying Capacity 180kg Loaded Weight 386kg (F: 141.3kg; R: 244.7kg), *397.4kg (F: 145kg; R: 252.4kg) Suspension Type Front41mm telescopic fork, 120mm axle travel RearDual conventional dampers with 5-step spring preload adjustment, 115mm axle travel Wheels Type FrontU-section triple-spoke cast aluminium RearU-section triple-spoke cast aluminium Rim Size Front14M/C x MT2.75 Rear13M/C x MT4.50 Tyre Size Front120/80 14M/C (58S) Rear150/70 13M/C (64S) Tyre Pressure Front 200kPa Rear 225kPa Brakes Type Front256 x 5mm single disc with Combined 3-piston calliper, (*ABS) and sintered metal pads Rear240 x 6mm hydraulic disc with dual-piston calliper, (*ABS) and sintered metal pads * ABS Version All specifications are provisional and subject to change without notice.

2011 Kawasaki W800 Specifications

0

Filed Under (Kawasaki) by admin on 17-11-2010

ENGINE

* Engine type Air-cooled, 4-stroke Vertical Twin
* Displacement 773 cm³
* Bore x stroke 77.0 x 83.0 mm
* Compression ratio 8.4:1
* Valve/Induction system SOHC, 8 valves
* Fuel system Fuel injection:?34 mm x 2 with sub-throttles
* Ignition Digital
* Starting Electric
* Lubrication Forced lubrication, wet sump

DRIVETRAIN

* Transmission 5-speed, return
* Final Drive Chain
* Primary reduction ratio 2.095 (88/42)
* Gear ratios: 1st 2.353 (40/17)
* Gear ratios: 2nd 1.590 (35/22)
* Gear ratios: 3rd 1.240 (31/25)
* Gear ratios: 4th 1.000 (28/28)
* Gear ratios: 5th 0.851 (23/27)
* Final reduction ratio 2.467 (37/15)
* Clutch Wet multi-disc, manual

FRAME

* Frame type Double-cradle, high-tensile steel
* Wheel travel, front 130 mm
* Wheel travel, rear 105 mm
* Tyre, front 100/90-19M/C 57H
* Tyre, rear 130/80-18M/C 66H
* Rake/Trail 27° / 108 mm
* Steering angle, left / right 37° / 37°

SUSPENSION

* Suspension, front 39 mm telescopic fork
* Suspension, rear Twin shocks
* Type: Twin shocks
* Spring preload: 5-way

BRAKES

* Brakes, front Type: Single 300 mm disc
* Caliper: Twin-piston
* Brakes, rear Type: Drum, 160 mm

DIMENSIONS

* Dimensions (L x W x H) 2,180 x 790 x 1,075 mm
* Wheelbase 1,465 mm
* Ground Clearance 125 mm
* Seat height 790 mm
* Curb Mass 216 kg
* Fuel capacity 14 litres

Incoming search terms: