underneath for raider 150

You search Auto repair manual PDF underneath for raider 150, if there are search results will appear below. If search results do not exist, please search by others keyword.



  underneath for raider 150 Direct Download speed 5282 Kb/s

  underneath for raider 150 Full Version speed 6162 Kb/s



Dazon Raider Classic 150 (Oil-cooled & Internal Gearbox): Service Manual (single/ double-seat)

0

Filed Under (Dazon) by admin on 30-11-2010

download
1.2.1 Fuel Please use the gasoline of SAE 90# or above. Also we recommend you to use the unleaded gasoline. 1.2.2 Engine Oil Please use the high-quality engine oil of SAE 10w/30SF. 1.3 Break-in Procedure For your first 2 hours of riding, don’t exceed 2/3 throttles. Vary the engine speed for the first 5 hours. Never hold the engine at full throttle for long periods of time. Raider-Classic 150 (Oil-cooled&Internal Gearbox): Service Manual (single/ double-seat) EEC Version;3.0 Feb..2005 5 1.4 Specifications DIMENSIONS SINGLE-SEAT / DOUBLE-SEAT Overall Length 2330mm / 2300mm Overall Width 1310mm / 1460mm Overall Height 1425mm / 1425mm Wheelbase 1475mm / 1520mm Ground Clearance 200mm VIN Accord with GMVR A01-01 Statutory Plate& Safety Labels Accord with GB 7258-1997 ENGINE Model DZ1P57QMJ Type Oil-cooled, single cylinder, 4-Stroke Engine Capacity 150cc Displacement 149.6ml Bore X Stroke 57.4mm X 57.8mm Max Power 7.0kw or 7000r/m Max Torque 10.0N.m or 6500 r/m Idle Speed 1700 ± 100 r/m CO Emission 7.0g/km HC Emission 1.0g/km Fuel Type SAE 90# or above (unleaded) Lubricate Oil Type SAE 10W/30SF Lubrication Force & Splash Cooling Oil-cooled Ignition C. D. I. Starting Electric Spark Plug C7HSA (NGK) Spark Plug Gap 0.6~0.7mm Transmission Chain Transmission Gearbox Transmission Ratio F.:7.8:1 ; B.:11.297:1 Compression Ratio 9.5 ± 0.1 : 1 Carburetor MIKUNI BS 24-1005 Absorber Normal (in 10 5 times of experiments) CAPACITIES Front/ Rear Tire Load Coefficient 36 Front/ Rear Tire Speed Level L Fuel Tank 7.0L, 130kpa (no leakage in experiments) Engine Oil 1000ml Gear Oil 200ml Starting Time ≤15s Climbing ≥20%

Incoming search terms:

2011 FORD HARLEY-DAVIDSON F-150 TECHNICAL SPECIFICATIONS

0

Filed Under (Harley Davidson) by admin on 01-11-2010

download
Final assembly location Dearborn Truck Plant, Dearborn, Mich. POWERTRAIN AND CHASSIS ENGINE Type 6.2-liter two-valve V8 Configuration Iron block, aluminum heads Valvetrain SOHC, two valves per cylinder, roller-rocker shaft with hydraulic lash adjusters Bore x stroke 4.02 x 3.74 inches Displacement 379 cubic inches, 6,210 cc Compression ratio 9.8:1 Horsepower 411 hp @ 5,500 rpm Torque 434 lb.-ft. @ 4,500 rpm Fuel Injection Sequential multi-port electronic Oil capacity Seven quarts DRIVETRAIN Layout RWD or AWD TRANSMISSION Standard Six-speed automatic overdrive Gear ratios 1st 4.17:1 2nd 2.34:1 3rd 1.52:1 4th 1.14:1 5th 0.86:1 6th 0.69:1 Reverse 3.40:1 Available axle ratios 3.73 SUSPENSION Front 4×2 Coil-on-shock, long-spindle double-wishbone independent, stamped-steel lower control arm (sport-tuned) Front 4×4 Coil-on-shock, long-spindle double-wishbone independent, stamped-steel lower control arm (sport-tuned) Rear 4×2 Hotchkiss-type non-independent live, leaf springs and outboard shock absorbers (sport-tuned) Rear 4×4 Hotchkiss-type non-independent live, leaf springs and outboard shock absorbers (sport-tuned) STEERING Type Power rack-and-pinion Turning circle curb-to-curb 47.0 feet 2011 FORD HARLEY-DAVIDSON F-150 TECHNICAL SPECIFICATIONS BRAKES Front 13.8-inch vented disc Rear 13.7-inch vented disc Assist type Vacuum, RSC WHEELS AND TIRES Wheels 22-inch polished forged aluminum with painted accents with “Harley- Davidson” Bar & Shield logo on wheel ornament Tires P275/45R-22 all-season BSW DIMENSIONS (inches unless otherwise noted) EXTERIOR SuperCrew RWD SuperCrew AWD Wheelbase 144.5 144.5 Vehicle length 231.9 231.9 Vehicle width (without mirrors) 79.2 79.2 Vehicle height 74.8 75.9 Track width, front/rear 67.0/67.0 67.0/67.0 Cargo box length 67.0 67.0 Width (max) between wheels 50.0 50.0 Inside box height 22.4 22.4 INTERIOR Seating capacity Five Five Headroom Front row 41.0 41.0 Rear row 40.3 40.3 Legroom Front row 41.4 41.4 Second row 43.5 43.5 Shoulder room Front row 65.9 65.9 Second row 65.5 65.5 Hip room Front row 60.5 60.5 Second row 64.6 64.6 WEIGHTS AND TOWING (pounds)

Incoming search terms:

Yamaha's 2008 Raider Custom

0

Filed Under (Yamaha) by admin on 16-11-2010

download
MW F800GS Preview! 12 Ducati’s 1098S Superbike- Moto-lust Satisfied 20 2008 Yamaha R6 First Impression— Much-needed mid-range thanks to YCC-I 22 Wire Without Fire— Howto modify electrical circuits… minus the flames! 27 Crash Survey— Share your unfortunate experiences so we can all learn how to avoid the pain 29 2008 Performance Index— Bigger than ever 34 CANbus 101— Understanding Controller Area Network electrical wiring 36 Shadow 750 Options— OEM accessories evaluated 37 Triumph’s 2008 Lineup— The Street Triple 675 and Rocket III Touring debut 39 Medical Motorcycling— Flesh-eating Bugs! 40 Motorcycle Design— Shafted: Moto Guzzi’s identity crisis 48 Innovation Of The Month— Orikaso dish set 48 Light My FireSpork

Incoming search terms:

Yamaha XV-19 Raider 465 Series Single Shock Supplement

0

Filed Under (Yamaha) by admin on 13-02-2011

download
Mount the shock as you would your stock shock per your authorized shop manual (with the rebound adjustment at the bottom) noting the following: n As you mount the shock, feed the Remote Adjustable Pre-Load adjuster towards the rear (see figure 2) and to the right side of the swingarm (see figure 3) . n Do not loosen or attempt to rotate the line between the shock and the adjuster. n Make sure the shock rebound adjustment is toward the rear and facing the right side of the motorcycle and the nitrogen pressure valve is facing down. n Tighten shock bolts to the proper torque specifications (refer to your manual). n Locate the EXUP valve servo mounting bracket, specifically the two bolts used to secure it to the frame (see figure 4) . They below the seat on the right hand side of the motorcycle. n Now either mount the adjuster to the supplied mounting bracket using the supplied M6-1.0X8mm SHCS fasteners and torque them to 80-90 in/lbs (9-10 N-m), then mount the bracket and adjuster to the bike using two EXUP valve servo mounting bolts (as shown in figure 5) – or – mount the adjuster bracket to the frame using those two bolts, then mount the adjuster to the bracket (may require removal of exhaust stay). n Using the supplied zip-ties, secure the hydraulic line away from any moving parts or heat sources.

Incoming search terms:

DAZON RAIDER CLASSIC OWNER'S MANUAL

0

Filed Under (Dazon) by admin on 28-11-2010

download
Tires: Use a gauge to check the air pressure. Adjust if needed. Also look for signs of damages or excessive wear. z Nuts & Bolts : Check the wheels to see that the axle nuts are tightened. Use a wrench to make sure all accessible nuts, bolts, and fasteners are tight. z Underbody & Exhaust System: Check for and remove any dirt, vegetation or other debris that could be fire hazard or interfere with the proper operation of the BUGGY. z Air Cleaner Housing Drain Tube: Check for carbon deposits in the drain tube. If necessary, clean the tube and check the air cleaner housing. z Leaks, Loose Parts : Walk around your BUGGY and look for anything that appears unusual, such as a leak or loose cable. z Lights : Make sure the headlight, brake light and taillight are working properly. z Throttle : Check the free play and adjust if needed. Press the throttle to make sure it moves smoothly without sticking, and snaps back automatically when it is released. z Brakes : Press the rear brake pedal several times, check for proper brake pedal free play. Make sure there is no brake fluid leakage. z Engine Stop Button : When engine is running, press and hold the Engine Stop Button for two seconds. Make

KYMCO Super 8 150 Exhaust System with M-2 Canister Installation Instructions

0

Filed Under (Kymco) by admin on 26-10-2010

download
1.*Make*sure*the*bike*is*completely*cool*before*starting* the*installation.*Make*sure*the*bike*is*secure*on*a* centerstand*or*ideally*a*service*lift. 2.*Remove*OEM*exhaust*assembly. 3.*Attach*supplied*muffler*hanger*bracket*using*the* supplied*flange*bolts*and*tighten*to*15lbs-ft. 4.*Attach*TBR*header*to*muffler*using*the*X-ring*and*4* 6x14mm*bolts*with*lock*washers*provided,*leave*loose* for*now. 5.*Install*TBR*exhaust*to*scooter*keeping*the*OEM*exhaust* gasket*between*header*and*cylinder*head. 6.*Slide*rubber*lined*muffler*clamp*over*muffler*assembly* and*secure*to*bracket*using*supplied*8x20mm*bolt*and* nut. 7 .*Check*muffler*alignment*and*tighten*header*nuts*then* X-ring*bolts*and*finally*muffler*clamp*bolt. 8.*Before*you*run*the*bike,*clean*off*all*fingerprints*and* dirt,*as*any*oily*residue*will*etch*the*metal*and*become* somewhat*permanent*when*the*system*gets*hot.*Run* the*bike*and*enjoy.*It*is*normal*for*some*white*smoke*to* appear*the*first*time*you*start*the*bike.*This*is*packing/ manufacturing*oil*from*inside*the*pipe*burning*off.* Check*for*gaps*or*leaks.*If*you*find*a*leak,*a*little*high* temperature*silicon*sealant*should*fix*it.*After*50*to*100* miles,*recheck*all*fasteners*for*tightness. Qty.*Description* Part*Number 1* Muffler*Canister*M-2** Varies 1* Header* 005-27401H 1* Muffler*Clamp* Varies 1* HARDWARE*KIT* 005-274-3 2* *X-Ring* (half)* 005-7-2-3 1* *Long*Muffler*Mounting*Bracket* 005-274-B 1* *8mm*Flange*Nut* 005-FN8

Vento Rebellian 150 Brackets MiniTrike Installation Manual

0

Filed Under (Vento) by admin on 02-11-2010

download
Secure motorcycle in an upright stable position 2. Remove center stand. 3. Attach bracket A to center stand mount. 4. Remove saddle bags. 5. Insert longer bolts provided from inside saddle bag through bracket F (left)/ G (right) and attach to rear motorcycle sub frame. 6. Attach bracket D (left) / E (right) to TOP of forward MiniTrike attachment point. 7. Attach axles and wheels to MiniTrike frame and place in proper position and relation behind motorcycle. 8. Attach bottom of bracket H (left) / I (right) to rear MiniTrike frame attachment point and top of H/I to rear of brackets F/G. 9. Attach bracket B (left) / C (right) to BOTTOM of brackets D/E and TOP of attaching arm on bracket A. 10. Ensure MiniTrike is square with motorcycle and carefully tighten all bolts.

Incoming search terms:

APRILIA MOJITO 50-125-150 workshop manual

0

Filed Under (Aprilia) by admin on 27-11-2010

download
FUEL DANGER Fuel used to drive internal combustion engines is highly inflammable and may become explosive under certain conditions. It is best to refuel and carry out maintenance in well ventilated places with the engine switched off. Do not smoke during refuelling or near fuel fumes. Avoid all contact with naked flames, sparks, or any other source that may cause ignition or explosion. Also avoid allowing the fuel to spill out of the filler cap as it could catch fire on contact with the very hot surfaces on the engine. Should fuel be spilled accidentally check that the area is completely dry before starting up the vehicle. The fuel expands when subjected to heat or the sun’s rays. The fuel tank should therefore never be filled to the brim. Close the filler cap carefully on completing refuelling. Avoid the fuel coming into contact with your skin, inhaling vapours, ingestion and siphoning from one container to another using a hose. DO NOT DISPOSE OF THE FUEL INTO THE ENVIRONMENT. KEEP AWAY FROM CHILDREN. Only use super lead-free petrol, with a minimum octane rating of 95 (N.O.R.M.) and 85 (N.O.M.M.). LUBRICANTS DANGER Adequate lubrication of the vehicle is essential to guarantee the safety of the vehicle. Failure to keep lubricants at sufficiently high levels or the use of inadequate, new and clean lubricants may cause the engine or gearbox to seize, resulting in accidents, serious injury or death. Gearbox oil may cause serious harm to your skin if handled for long periods of time and on a daily ba- sis. We recommend washing your hands carefully after having handled this oil. Do not dispose of the oil into the environment. Deliver this oil to the nearest collection company for spent oil or the supplier, or have them collect it. WARNING When putting oil into the vehicle be very careful not to spill any. Immediately clean off any spilt oil, otherwise it may damage the paintwork on the vehicle. In addition, any oil that ends up on the tyres will make them extremely slippery, creating a dangerous situation. If an oil leak should arise, do not use the vehicle. Check and identify the cause of the leak and repair the component involved. ENGINE OIL DANGER Engine oil may cause serious harm to your skin if handled for long periods of time and on a daily ba- sis. We recommend washing your hands carefully after having handled this oil. Do not dispose of the oil into the environment. Deliver this oil to the nearest collection company for spent oil or the supplier, or have them collect it. When carrying out maintenance we recommend wearing latex gloves. FORK OIL DANGER Adjusting the setting on the shock absorbers and/or the viscosity of the oil used in them may partially change the reaction of the suspension. Standard oil viscosity: SAE 20 W. The viscosity grade may be chosen in relation to the type of set-up you want on the vehicle (SAE 5W soft, 20W rigid). These two products may be used in varying percentages in order to obtain the required reaction

Kymco People 125/ 150 FRONT WHEEL/ FRONT BRAKE/ FRONT SUSPENSION

0

Filed Under (Kymco) by admin on 12-12-2010

download
SERVICE INFORMATION GENERAL INSTRUCTIONS Remove the motorcycle frame covers before removing the front wheel. Jack the motorcycle front wheel off the ground and be careful to prevent the motorcycle from falling down. During servicing, keep oil or grease off the brake drum and brake linings. Contaminated brake disk or brake pads reduce stopping power. Clean the contaminated brake disk with high-performance brake degreaser and replace the brake pads. Do not use brake fluid for cleaning. Bleed air from the brake system if the brake system is removed or the brake is soft. Do not allow any foreign matters to enter the brake system when filling it with brake fluid. Brake fluid will damage painted surfaces and plastic parts. When servicing the brake system, use shop towels to cover and protect rubber, plastic parts and coated surfaces. Wipe off any spilled brake fluid with a clean shop towel. Inspect the brake system before riding. SPECIFICATIONS Item Standard (mm) Service Limit (mm) Axle shaft runout ─ 0.2 Radial ─ 2.0 Axial ─ 2.0 Front brake lining thickness 5.5 2.75 Front shock absorber spring free length 260 252 Brake disk thickness 3.2_3.5 3.0 Brake disk runout ─ 0.25 Brake master cylinder I.D. 12.700_12.74312.75 Brake master cylinder piston O.D. 12.657_12.68412.64 Brake caliper piston O.D. 33.910_33.93433.901 Brake caliper cylinder I.D.

Incoming search terms:

Wildfire WFH 150-T Touring Scooter Specification And Owner's Manual

0

Filed Under (Wildfire) by admin on 29-11-2010

download
Engine Oil Replacement • Replace the engine oil after the first 50 miles or 1 hour with 5w50, 10w50 or 15W50 synthetic engine oil. Then replace again every 1,500 miles or 1 each year. Check oil level every 500 miles, add oil if needed. Changing the Engine Oil (1).Warm up the engine for a few minutes. (2).Stop the engine. (3). Place scooter on center stand. (4).Place an oil pan under the engine and remove the dipstick. (5).Remove the drain plug and drain the oil. Reach in drain hole, pull out filter clean and reinstall, after all oil drains out. (6).Reinstall drain plug. (7). Fill the engine with oil until the level is in the designated area on the dipstick. (8).Start the engine and check for oil leaks. If a leak is found stop the engine immediately and look for cause. Rear Wheel Oil Replacement • Replace the gear oil after the first 500 miles with 5W/50 synthetic engine oil. Replace the gear oil again every 4 months or every 2000 miles. • Replacing the Gear Oil (1).Put the scooter on the center stand (please see photo below) . (2).Place an oil pan under the gear case (please see photo below) . (3).Remove the oil filler bolt and the drain plug to drain the oil (please see photo below) . (4).Reinstall and tighten the drain plug. (5).Fill the gear case with oil (please see photo below) . (6).Reinstall the oil filler bolt. (7).Check for oil leakage. Cleaning Air Cleaner Be sure to check the air cleaner regularly. (1).Place the scooter on the center stand. (2).Unscrew and remove the left side panel. (3).Remove the air cleaner cover by removing the screws. (4).Take out the air cleaner by removing the screws. (5).Remove the air cleaner element and wash it gently, but thoroughly in solvent. Replace if damaged. (6).Squeeze out the excess solvent and dry it. (7).Apply oil to the entire surface of the air cleaner and squeeze out the excess oil. It should be damp but not dripping. (8).Install the air cleaner, cleaner cover, and left side panel. center stand 1 oil pan 2 3 oil drain plug oil pan 5 Main Switches On Position: • Electrical circuits are switched on. The engine can be started and the key can not be removed.

Incoming search terms:

Incoming search terms: