yatch global asia co ltd mail

You search Auto repair manual PDF yatch global asia co ltd mail, if there are search results will appear below. If search results do not exist, please search by others keyword.





ROAD TECH ZUMO 660 GLOBAL POSITIONING SYSTEM (GPS) FAIRING MOUNTING KIT INSTALLATION

0

Filed Under (Tips and Review) by admin on 27-10-2010

download
1. Refer to the service manual and follow the instructions given to remove the main fuse. 2. Remove the outer fairing and windshield. Refer to the service manual. is05900 Figure 1. Road Tech Zumo Drilling Template Placement 3. See Figure 1. Obtain the drilling template from the kit. 4. Position the template on the back side of the inner fairing, in the upper left corner above the fuel gauge, aligning the template to the top of the inner fairing and the plastic rib as shown. 5. Drill a 5/16 inch (8 mm) diameter hole through the inner fairing per the template. 6. See Figure 4. Position the gasket (2) and GPS mount (1) onto the face of the inner fairing, aligning the upper hole in the mount with the hole drilled in the previous step. 7. Temporarily install one of the screws (4) through the upper hole to help align the GPS mount. 8. See Figure 2. Mark the location of the lower mounting hole on the face of the inner fairing, using the GPS mount and gasket as a template. Mark the location of the wire routing hole using the guide hole (3) in the gasket as a template. 9. Remove the screw, GPS mount and gasket from the inner fairing. 10. Drill a 5/16 inch (8 mm) diameter hole through the inner fairing in the lower mounting location. Drill an 11/16 (17 mm) diameter hole through the inner fairing in the wire routing location. 1 2 3 is06149 1. Gasket 2. Wire routing guide hole and ribs 3. Guide hole Figure 2. Remove Gasket Ribs and Guide Hole 11. See Figure 2. Remove the wire routing guide hole and four ribs (2) from the gasket (1). 12. See Figure 4. Install the GPS mount and gasket to the inner fairing with screws (4) flat washers (5) and locknuts (6). Tighten to 50-60 in-lbs (5.6-6.8 Nm) 13. Obtain cradle with harness from GPS system kit. NOTE The fuse holder on the harness must be opened to fit through the hole. 14. Insert harness through the 11/16 inch (17 mm) diameter hole drilled earlier. 15. Insert the split grommet into the 11/16 inch (17 mm) diameter hole around the harness. Installing the Cradle 1. See Figure 4. Install four bushings (H) from the GPS system kit and insert them into the back of the cradle mounting holes. 2. Position the cradle to the GPS mount. Direct the harness out through the slot (G) of the mount. 3. Insert a button head screw (3) through one of the holes in the cradle and into the corresponding hole in the GPS mount, but do not fully tighten

2010 Toyota Motorsports/ TRD USA Contingency Award Program

0

Filed Under (Toyota Manuals) by admin on 29-09-2011

download
To enroll in the program, complete the registration form included in the enclosed material and mail, fax or e-mail it to TRD per the instructions at the bottom of the form. Contact personnel are listed on the attached 2010 Contingency Award Guidelines sheets. These people are available to assist you throughout the year. Parts Ordering: If you are planning to order Toyota parts during 2010 you must supply us with your Visa or Master Card credit card number at the time you register in the program. There is a line on the registration form for this number. See the attached Parts Ordering Guidelines for detailed information on how to order parts. TRD is looking forward to working with each of you, and we wish you a very successful year with your racing program

Incoming search terms:

TOYOTA ALL MODELS ALTERNATE REFRIGERANTS AND A/ C RETROFIT

0

Filed Under (Toyota Manuals) by admin on 26-10-2011

download
The E.P.A. has officially banned the manufacture of Refrigerant 12 (Freon) after January 1, 1996. As a result, surplus supplies of R-12 will begin to dwindle over the next several years until, eventually, R-12 will no longer be available. This uncertainty about the availability of R-12 has caused significant concerns for Toyota dealers when servicing HVAC systems not using R-134a refrigerant. Similarly, the reduced availability of R-12 has prompted demands for R-134a retrofit kits and/or alternate refrigerants. This TSB will clarify Toyota’s current recommendations for servicing and retrofitting HVAC systems on Toyota vehicles using R-12 refrigerant. ALTERNATE REFRIGERANTS: Previously, the E.P.A. has endorsed other alternative refrigerants. These endorsements, combined with the uncertain future availability of R-12, have led to a limited acceptance of using alternative refrigerants when servicing or retrofitting R-12 HVAC systems. Use of these refrigerants can lead to several service related problems, including: Poor system performance and leak detection capabilities. Contamination of R-12 and R-134a during refrigerant recovery and recycling. Recently the E.P.A. released a statement clarifying that approval of alternative refrigerants relates only to the toxicology, flammability, ozone depletion and global warming characteristics. The approval does not imply acceptability of alternative refrigerants use with respect to serviceability or performance

2005-2008 TOYOTA TACOMA/ TUNDRA

0

Filed Under (Toyota Manuals) by admin on 09-06-2011

Download
anti-Skid Brakes (ABS) STD Global Outstanding Assessment body (GOA) STD Toyota Safe-T-Cell STD Driver’s SRS airbag STD Front passenger SRS airbag STD Driver’s pre-tensioner seatbelt STD Driver’s forcelimiter eatbelt STD Front passenger pre-tensioner seatbelt STD Front passenger forcelimiter seatbelt STD Height adjustable front seatbelts STD 2nd row/rear seat centre position lap/sash seatbelt STD 3rd row lap/sash outboard seatbelts STD 2nd row/rear seat ALR outboard seatbelts for child seats STD

BMW Motorcycles F 650 GS Dakar fuel tank replacement

0

Filed Under (BMW) by admin on 12-11-2010

download
Your center has been requested in a recent e-mail, to forward VIN, color Information: and status information on all F 650 GS(A) and Dakar models remaining in your inventory. Fuel tanks, together with the appropriate colored trim pieces, will be forwarded to your center for each bike in your inventory as replacement parts arrive in BMW NA inventory. Warranty Please enter a warranty campaign claim , encompassing the following Reimbursement: Work Package information, when claiming reimbursement for the updates called for in this bulletin. Even though there is no charge for the parts, a sublet of $60.00 will be applied to each claim. This sublet amount is intended as a combination of both the handling and as reimbursement for incidental items that may be required in the replacement of the fuel tank. Work Package #1 is to be used in the replacement of all F 650 GS(A) and Dakar model fuel tanks. Defect Code: 00 00 16 1100 Description: Fuel Tank – Leaking Flat Rate Code: 00 60 059 Description: Remove and reinstall fuel tank (USA only) FRU: 12 FRU Sublet #4: $60.00 Pick up & In the recent Sales and Marketing Bulletin # B23/00 introducing the “Customer Delivery: Demonstration Program”, (e-mailed to your center on September 7, 2000), each BMW motorcycle retailer was asked to arrange to pick up, complete the updates and deliver the motorcycle back to the customer and to offer the use of a demonstrator where appropriate.

Incoming search terms:

Motorcycle Carburetor Rebuilding

0

Filed Under (Tips and Review) by admin on 22-11-2010

download
Experience has shown that when a customer disassembles, it creates a storage issue for us as well as parts are generally missing. The disassembly usually costs us extra hours of work during the rebuild. The only acceptable part to be removed from an assembly is the cable bracket if it is fragile and in danger of breaking during shipping. All other parts should be where they belong. Rebuild Service Prices: If your carburetor type doesn’t appear below or you are not sure, please send a note to our e-mail for pricing details. Military rebates are available to honor our service men and women! Active Duty military, contact us for a rebate. Please include your service, pay grade and current duty station when you contact us.

2001-2002 HONDA GL1800/A CD Changer Replacement

0

Filed Under (Honda) by admin on 03-03-2011

download
2001-2002 GL1800/A CD Changer Replacement ORDERING AND REPLACING THE CD CHANGER 1. Before calling the CD Changer Order Desk, have the following information ready: • VIN • Failure Information (i.e., symptom) • Warranty Status 2. To order, call the CD Changer Order Desk toll free: (888) 997-7278 . The CD Changer Order Desk hours are Monday thru Friday, 8:30am – 8:00pm EST. Part Number: 08A06-MCA-100RM Honda Code: 7097009 3. After calling the CD Changer Order Desk, an exchange CD Changer will be shipped overnight (freight prepaid). 4. Replace the faulty CD Changer with the exchange unit (see REPAIR PROCEDURE ). DO NOT remove the faulty CD Changer until you receive the exchange unit. DO NOT ATTEMPT TO REMOVE ANY STUCK CD’S. CHANGERS DAMAGED IN THIS WAY WILL BE RETURNED TO THE DEALER AND NO CORE CREDIT WILL BE ALLOWED. You will be billed $300.00 for the replacement unit. You must return the faulty CD Changer for a core credit and file a warranty claim to receive your total reimbursement (see TRANSACTION SUMMARY on page 3 for details). REPAIR PROCEDURE 1. Refer to the Installation Instructions included with the replacement CD Changer. 2. NOTE: You MUST remove the shipping bracket from the replacement unit before you complete the installation. If a CD is stuck inside the faulty unit, leave it there : • The vendor needs it for diagnosing and testing. • If you try to remove it, you’ll damage the unit. • The vendor will return the unit if it has been damaged during attempted CD removal. Fill in the customer information on the Audio System Diagnosis and Core Return form. The vendor will remove the CD and mail it back to the customer. IDENTIFICATION No identification is necessary for this repair

1997 Honda CBR 1000 F specifications

0

Filed Under (Honda) by admin on 03-11-2010

download
Front brakes: Dual disc Rear brakes: Single disc Speed and acceleration Top speed: 255.0 km/h (158.4 mph) Power/weight ratio: 0.5745 HP/kg Other specifications Further information Parts and accessories Check out parts and accessories from our partners. Ask questions Join the 97 Honda CBR 1000 F discussion group Insurance, loans, tests Search the web for dealers, loan and insurance costs, tests, customizing, etc. Related bikes List related bikes for comparison of specs Buying a bike starts at Bikez Get a list of related motorbikes before you buy this Honda. Inspect technical data. Look at photos. Read the riders’ comments at the bike’s discussion group. And check out the bike’s reliability, repair costs, etc. Show any 1997 Honda CBR 1000 F for sale on our Bikez.biz Motorcycle Classifieds. You can also sign up for e-mail notification when such bikes are advertised in the future. And advertise your old MC for sale. Our efficient ads are free. You are also welcome to read and submit motorcycle reviews. Rating sample for this Honda bike Value for money for the 1997 Honda CBR 1000 F: (67.1 out of 100) Click here for complete rating. You can also compare bikes. Pictures, trademarks and logos of third parties are exclusive property of the respective owners. Technical specifications are subject to change without notice. Bikez.com has been developed by low-cost software development company ObjectLabs

Incoming search terms:

2001-2002 GL1800/ A ORDERING AND REPLACING THE CD CHANGER

0

Filed Under (Honda) by admin on 29-01-2011

download
1. Before calling the CD Changer Order Desk, have the following information ready: • VIN • Failure Information (i.e., symptom) • Warranty Status 2. To order, call the CD Changer Order Desk toll free: (888) 997-7278 . The CD Changer Order Desk hours are Monday thru Friday, 8:30am – 8:00pm EST. Part Number: 08A06-MCA-100RM Honda Code: 7097009 3. After calling the CD Changer Order Desk, an exchange CD Changer will be shipped overnight (freight prepaid). 4. Replace the faulty CD Changer with the exchange unit (see REPAIR PROCEDURE ). DO NOT remove the faulty CD Changer until you receive the exchange unit. DO NOT ATTEMPT TO REMOVE ANY STUCK CD’S. CHANGERS DAMAGED IN THIS WAY WILL BE RETURNED TO THE DEALER AND NO CORE CREDIT WILL BE ALLOWED. You will be billed $300.00 for the replacement unit. You must return the faulty CD Changer for a core credit and file a warranty claim to receive your total reimbursement (see TRANSACTION SUMMARY on page 3 for details). REPAIR PROCEDURE 1. Refer to the Installation Instructions included with the replacement CD Changer. 2. NOTE: You MUST remove the shipping bracket from the replacement unit before you complete the installation. If a CD is stuck inside the faulty unit, leave it there : • The vendor needs it for diagnosing and testing. • If you try to remove it, you’ll damage the unit. • The vendor will return the unit if it has been damaged during attempted CD removal. Fill in the customer information on the Audio System Diagnosis and Core Return form. The vendor will remove the CD and mail it back to the custome

Incoming search terms:

Suzuki M 109 WINDSHIELD INSTALLATION AND OWNER'S MANUAL

0

Filed Under (Suzuki) by admin on 18-02-2012

download
Position the motorcycle securely on its stand or a work stand. Cover the front fender and fuel tank with a cloth to avoid scratches from dropped tools. 1. Use the above diagram toidentify left from right Lower and Upper Mount Brackets. Figure 1 2. Cut each of the clamp spacers in half to make 8 pieces, each 2.5 x 1.55″. 3. Apply one spacer to the inside of each mount bracket. Figure 2 Figure 1 Figure 2 N28201 and N28202 WINDSHIELD INSTALLATION AND OWNER’S MANUAL for Suzuki®M109 Right and Left side of Motorcycle is determined while sitting on the bike. Determine left from right Upper bracket. Washer angles inboard about 5 degrees. Note, Angle distinguishes Right from Left Lower Mount Bracket 1 2 4 3 5 6 8 9 10 National Cycle, Inc. Maywood, IL 60153-0158 USA 708-343-0400 / Fax: 708-343-0625 www.nationalcycle.com / e mail:info@nationalcycle.com Page 1 of 3 10-114056-000 08/07 / Rev B. 03/08 7 3, Left Upper Bracket 4, Right Upper Bracket About 5 0 inboard angle
INSTALLATION Measurements provided for clamp location. From this point you can adjust the brackets 1″ (22mm) higher if you prefer keeping in mind, position of the front nose of windshield should have a minimum of 1/2″ (13mm) clearance from cowling . Figure 3. Right Side Lower Mount Assembly 1. Start on the Right Side of motorcycle. At the top of the fork, place one inner black clamp on the fork tube. Figure 4 2. Hook the RIGHT SIDE lower mount bracket (2) to the inside clamp. Figure 5 3. Slide assembly down fork so bottom edge of bracket is 1.75″ (44mm) from top of lower triple clamp. Adjust bracket so flat in bracket runs parallel with motorcycle. Figure 6 and 7 4. Loosely install one M8 x 16 screw. (6mm Hex Key) Figure 7 Right Side Upper Mount Assembly 5. Place the second inside black clamp on the right fork tube.

Incoming search terms: