Suzuki GSX1000R 465 SeriesSingle Shock Supplement

0

Filed Under (Suzuki) by admin on 13-02-2011

download
1. One set of the shouldered sleeves with O-rings should be installed in the shock eye. If not, insert sleeves with O-rings in the shock eye (see figure 1). 2. Mount the shock as you would your stock shock per your authorized shop manual noting the following; Make sure the shock is mounted with the rebound adjustment at the bottom and facing the right side of the motorcycle and the nitrogen pressure valve is facing forward. Tighten the shock bolts to the proper torque specifications (refer to your manual). Caution: The installed spring length must never be set shorter than 133mm (5.25″) or shock damage may occur

Comments are closed.