2004 HARLEY DAVIDSON SPORTSTER XL, XL CUSTOM TANK BRA KIT Installation Instructions

0

Filed Under (Harley Davidson) by admin on 30-01-2011

download
1. See Figure 1. Beginning at the front of the tank, position the elastic strap over front edge of fuel tank against frame backbone making sure elastic strap does not pinch off fuel tank vent tube located underneath left side of tank. When properly positioned, strap will run down front of tank and along bottom toward rear of tank. Adjust, if necessary. Pull bra to the rear of tank and fit bra snugly around rear of tank. When performing the following step, route the elastic strap and steel “S’ hook between the main wiring harness and the frame backbone. If the strap is not routed between the main harness and frame backbone, the “S” hook could eventually cut into the main harness wiring causing electrical system failure which could result in death or serious injury. 2. Position the rear elastic strap around the frame backbone making sure the strap and “S” hook, when fastened, pass between the main wiring harness and frame backbone. 3. Smooth out any wrinkles in bra.