HARLEY DAVIDSON BULLET FRONT TURN SIGNAL LENS KIT INSTALLATION MANUAL

0

Filed Under (Harley Davidson) by admin on 13-03-2011

download
INSTALLATION 1. See Figure 1. Locate the removal notch (B) on the turn signal lens and carefully pry lens from housing (A). Discard lens. 2. Repeat for other lens. 3. Install new bulb (1) into the front turn signal assembly. 4. Install new lens (2 or 3) from kit by snapping into place. 5. Repeat for other turn signal. 6. Check turn signals for proper operation. SERVICE PARTS A 1 3 B 2 is05689 Figure 1. Service Parts: Bullet Front Turn Signal Lens Table 1. Service Parts Part Number Description (Quantity) Item Kit 69226-09 – Clear 69324-02 Lens, clear (2) 1 69331-02 Bulb, amber (2) 3 Kit 69208-09 – Smoked 69325-02 Lens, smoked (2) 2 69331-02 Bulb, amber (2) 3 Items referenced, but not included in kit Bullet-style turn signal housing A Notch B

HARLEY DAVIDSON SMOKED AND CLEAR FENDER TIP LENS KITS Preparation MANUAL

0

Filed Under (Harley Davidson) by admin on 13-02-2011

download
Preparation To prevent accidental vehicle start-up, which could cause death or serious injury, disconnect battery cables (negative cable first) before proceeding. (00048a) Disconnect negative (-) battery cable first. If positive (+) cable should contact ground with negative (-) cable connected, the resulting sparks can cause a battery explosion, which could result in death or serious injury. (00049a) 1. Disconnect the battery cables, negative cable first. 2 . See Figure 1. Insert blade of small screwdriver into slot at top of front fender tip lamp lens (2). Rotate end of screwdriver to unsnap lens from lamp bracket. Repeat for rear fender tip lamp lens. 3. Remove bulb (3) from socket (4). 4. From the kit, find the LED marked “Amber” (5) and install into front fender tip lamp assembly.lamp socket. 5. From the kit, find the LED marked “Red” (5) and install into rear fender tip lamp assembly.lamp socket. Always connect the positive battery cable first. If the positive cable should contact ground with the negative cable installed, the resulting sparks may cause a battery explosion which could result in death or serious injury. 6. Connect the battery cables, positive cable first. 7. Apply power and check for proper function of front and rear fender tip lamps