Honda GL 500 MiniTrike Installation Manual

0

Filed Under (Honda) by admin on 29-04-2011

download
Refer to diagram for bracket identification 1. Secure motorcycle in an upright stable position 2. Attach bracket A (left) to rear footpeg mount. 3. Attach bracket B (right) to rear footpeg mount. 4. Remove rear saddlebags. 5. Attach top of brackets C/D to saddlebag sub frame hardware as in photo. Place enclosed 3/8 spacer between brackets C/D and inside of sub frame. 6. Attach axles and wheels to MiniTrike frame and place in proper position and relation behind motorcycle. 7. Attach bracket A (left) / B (right) to TOP of forward attaching points on MiniTrike frame. 8. Attach bottom of brackets C/D to rear mounting plate on MiniTrike frame 9. Ensure MiniTrike is square with motorcycle and tighten all bolts. 10. Remount saddlebags. Wheel Alignment Wheel alignment is critical for proper tire wear and handling. With MiniTrike installed measure A and B . Loosen axle plates and align wheel so A and B are equal to within 1/16th of an inch. Tighten axle bolts and torque to 45 pounds. Repeat for C and D . It may be necessary to shim axle plates for proper alignment. NOTE : The measurement of A and B may not be the same as C and D. This is normal and presents no difficulty

Vento Rebellian 150 Brackets MiniTrike Installation Manual

0

Filed Under (Vento) by admin on 02-11-2010

download
Secure motorcycle in an upright stable position 2. Remove center stand. 3. Attach bracket A to center stand mount. 4. Remove saddle bags. 5. Insert longer bolts provided from inside saddle bag through bracket F (left)/ G (right) and attach to rear motorcycle sub frame. 6. Attach bracket D (left) / E (right) to TOP of forward MiniTrike attachment point. 7. Attach axles and wheels to MiniTrike frame and place in proper position and relation behind motorcycle. 8. Attach bottom of bracket H (left) / I (right) to rear MiniTrike frame attachment point and top of H/I to rear of brackets F/G. 9. Attach bracket B (left) / C (right) to BOTTOM of brackets D/E and TOP of attaching arm on bracket A. 10. Ensure MiniTrike is square with motorcycle and carefully tighten all bolts.

Incoming search terms:

Piaggio 250 Installation And Removal Manual

0

Filed Under (Piaggio) by admin on 28-10-2010

download
1. Secure scooter inastableupright position. 2. Attach bracket E to underside of scooter frame -Forward cross brace on E attaches to existing holes on underside of scooter frame. Secure bracket E with new bolts provided. -Ensure bracket E is square with scooter and locate two rear holes on bracket E . Two rear holes on E will align with scooter frame rear cross brace. Drill 3/8 inch holes incross brace to align with rear holes on bracket E . Attach with bolts provided. 3. Attach top of bracket C (left) / D (right) to outside of rear shock mount using new bolt provided. NOTE: A shorter bracket Dis included and required on some MP3250 models. 4. Attach axles and wheels to MiniTrikeframe and orient frame in position behind scooter. 5. Attach bottom of C/D to rear mounting plate on Mini Trike frame