Honda GL 1800 FOG LAMP INSTALLATION INSTRUCTIONS

0

Filed Under (Honda) by admin on 24-11-2011

download
Disconnect the negative cable from the battery before installing this accessory. • To prevent scalding, allow the engine and cooling system to cool before installing this accessory. • The memories of the tripmeter, clock, radio andbsuspension system will be erased when you disconnect the battery. Reset the memories after reconnecting the battery. • Tighten the screws, bolts and nuts securely. • Trim the excess ends off the wire ties after attaching them to the wire harnesses. Do not allow the cut part of the wire tie to interfere with another harness or brake pipe. Using cutting pliers, cut out the marked areas from the front lower cowl. Finish the edges of the holes smooth and flat with a file. 1. Disconnect the negative cable from the battery. 2. Remove the front lower cowl and bolts as described in the Service Manual.

2010 APRILIA Shiver Technical Specifications

0

Filed Under (Aprilia) by admin on 06-11-2010

download
Engine type Aprilia V90 four-stroke longitudinal 90° V-twin engine, liquid cooled, double overhead camshaft with mixed gear/chain timing system, four valves per cylinder. Fuel Unleaded petrol Bore and stroke 92 x 56.4 mm Total engine capacity 749.9 cc Compression ratio 11: 1 Maximum power at crankshaft 95 hp at 9,000 rpm Maximum torque at crankshaft 8.25 kgm at 7,000 rpm Fuel system Ride by Wire integrated engine control system. Ignition Digital electronic ignition integrated with injection system. Starting Electric Exhaust system 2 into 1 exhaust system in 100% stainless steel with three-way catalytic converter and lambda probe Alternator 450 W at 6,000 rpm Lubrication Wet sump Gearbox 6 speeds, drive ratio: 1st 36/14 (2.57) 2nd 32/17 (1.88) 3rd 30/20 (1.5) 4th 28/22 (1.27) 5th 23/26 (0.88) 6th 24/25 (0.96) Clutch Multiple discs in oil bath, hydraulically operated Primary drive Straight cut gears, drive ratio: 60/31 (1.75) Secondary drive Chain. Drive ratio: 16/44 Chassis Modular tubular steel frame fastened to aluminium side plates by high strength bolts. Removable rear subframe. Front suspension Upside down fork with * 43 stanchions. Wheel travel 120 mm. Rear suspension Aluminium alloy swingarm; with swingarm stiffener brace. Hydraulic shock absorber with adjustable rebound and preload. Wheel travel 130 mm. Brakes Front: Dual * 320 mm diam. wave stainless steel floating disc. Radial callipers with four pistons. Metal braided brake pipe. 2-channel Continental ABS system Rear: Stainless steel disc * 245 mm. Single piston calliper. Metal braided brake pipe. Wheel rims Aluminium alloy Front: 3.50 X 17″ Rear: 6.00 x 17″ Tyres Radial tubeless tyres; front: 120/70 ZR 17 rear: 180/55 ZR 17 Dimensions Max. length 2,265 mm Max. width 810 mm (at handlebar) Max. height 1,135 mm (at instrument panel) Saddle height 800 mm Centre to centre distance 1,440 mm Trail 109 mm Steering angle 25.7° Tank 15 lt

Incoming search terms: