Kawasaki Teryx Bikini Top Buckle Straps Installation Instructions

0

Filed Under (Kawasaki) by admin on 03-05-2012

download
Thread the front straps through the buckles. Do not tighten yet. Repeat on both sides. Thread Front Straps through Buckles Use a 19mm wrench to remove the existing bolt in the support cage. Slide a Buckle Strap over the bolt and reinstall it in the cage. Repeat on both sides of the vehicle. Install Buckle Straps Place Bikini on Vehicle Drape the Bikini over the vehicle. Thread Rear Straps through Buckles Thread a rear strap under the headrest support and through the buckle. Do not tighten yet. Repeat on both sides

HARLEY DAVIDSON SISSY BAR LUGGAGE INSTALLATION MANUAL

0

Filed Under (Harley Davidson) by admin on 19-02-2011

download
INSTALLATION Improper loading of cargo or installation of accessories can affect motorcycle stability and handling, which could result in death or serious injury. (00095a) Harley-Davidson cannot test and make specific recommendations regarding every accessory or combination of accessories sold, the rider must assume responsibility for safe operation of the motorcycle when installing accessories or carrying additional weight. Use the following guidelines when equipping a motorcycle or carrying passengers and cargo. •The Gross Vehicle Weight Rating (GVWR) is shown on the information plate located on the frame steering head. GVWR is the sum of the weight of the motorcycle and accessories and the maximum weight of the rider and cargo that may be carried safely. Do not pull a trailer with this motorcycle. Do not exceed the GVWR as indicated on the frame label. •Keep cargo weight concentrated close to the motorcycle and as low as possible to minimize the change in the motorcycle’s center of gravity. Distribute weight evenly on both sides of the vehicle and do not load bulky items too far behind the rider or add weight to the handlebars or front forks. •Do not exceed the maximum load (indicated on the label inside) in the bag. Do not exceed the capacity of the luggage rack. •Be sure cargo is secure and will not shift while riding. Periodically recheck the load. •Ensure that the bag strap buckles are secure •Large surfaces, such as fairings, windshields, backrests and luggage racks, can affect handling. These items should be designed and approved by Harley-Davidson specifically for the motorcycle model and be properly installed. 1. Disconnect the quick-disconnect buckle on the bottom mounting strap, and undo the D-ring fasteners on the back straps. Add enough slack to the straps to wrap around the luggage rack and backrest pad. 2. See Figure 1. Center the bag on the luggage rack with the closure buckles facing the back of the motorcycle. Bring the mounting strap on the bottom of the bag around the underside of the luggage rack

Incoming search terms:

HARLEY-DAVIDSON BACKPACK INSTALLATION INSTRUCTIONS

0

Filed Under (Harley Davidson) by admin on 11-02-2011

download
INSTALLATION Improper loading of cargo or installation of accessories can affect motorcycle stability and handling, which could result in death or serious injury. (00095a) Harley-Davidson cannot test and make specific recommendations regarding every accessory or combination of accessories sold, the rider must assume responsibility for safe operation of the motorcycle when installing accessories or carrying additional weight. Use the following guidelines when equipping a motorcycle or carrying passengers and cargo. •The gross Vehicle Weight Rating (GVWR) is shown on the information plate located on the frame steering head. GVWR is the sum of the weight of the motorcycle and accessories and the maximum weight of the rider and cargo that may be carried safely. Do not pull a trailer with this motorcycle. Do not exceed the GVWR as indicated on the frame label. •Keep cargo weight concentrated close to the motorcycle and as low as possible to minimize the change in the motorcycle’s center of gravity. Distribute weight evenly on both sides of the vehicle and do not load bulky items too far behind the rider or add weight to the handlebars or front forks. Do not exceed 25 pounds (11 kilograms) maximum load in the backpack. •If attaching to a luggage rack, do not exceed the capacity of the rack. •Be sure cargo is secure and will not shift while riding. Periodically recheck load. •Ensure that the bag strap buckles are secure. •Secure backpack straps inside top pocket, keep away from rear wheel. •See Accessories and Cargo section of Owner’s Manual for more information. •Large surfaces, such as fairings, windshields, backrests and luggage racks, can affect handling. These items should be designed and approved by Harley-Davidson specifically for the motorcycle model and be properly installed.

Harley-Davidson Road King Classic Tour Pack INSTALLATION MANUAL

0

Filed Under (Harley Davidson) by admin on 24-10-2010

download
1. Close the bag completely. Support the outside of the bag with a covered piece of soft material to prevent marring or scratching. 2. Position the template on the outside of the bag, centered between the buckles. Align the template along the gap between the seams as shown at right. Tape the template in place. 3. Drill all of the small holes on the template using a 1/4″ drill bit for the assembly holes. Drill or punch the 3/4″ hole for the lock. 4. Sandwich the lock. item 4, between items 3 and 5 as shown above in FIG.1. Fasten it to the bag with the black slotted blind screws (items 7). Sandwich the leather between the lock cover plate (item 6) on the outside and the lock assembly. It may be necessary to remove a section of excess overlapped leather. 5. Use the phillips head screws (item 7) provided to attach the spring loaded ratched bar assembly. 6. Lock operation. *a. rotate the locking bar down as the bag is closed * * so that it is started into the lock aseembly. *b. check that the bag straps are outside of the bag. *c. Press the bag lid down as your help to align the * * bag lock assembly with the locking ratched bar. the ratchet bar whill operate smoothly into the * * lock when properly aligned.