HARLEY DAVIDSON XL DETACHABLE SOLO RACK INSTALLATION MANUAL

0

Filed Under (Harley Davidson) by admin on 09-04-2011

download
Kit Contents See Figure 2 and Table 1. There are no Service Parts available with this kit. INSTALLATION 1. See Figure 2. While standing behind the motorcycle, place the front rack notches (1) into the front docking points (2). NOTE Check alignment as shown in Figure 1. Failure to properly align the docking points and sideplates may result in damage to the rear docking points. 2. Pull the rotary latches (3) back into their rearmost position. Position the rear rotary latches over the rear docking points (6), ensuring the latches and sideplates (4) fit into the neck (5) of the rear docking points. This may require some gentle squeezing or spreading of the sideplates. NOTE The front and rear docking points must be fully engaged. If docking points are not fully engaged or docking kit is loose, it could shift position or come loose during operation. 3. Push down and close the rotary latches by pressing the latch lever (7) as far forward as it will go. You will hear a click when the latch is in place. If the latch does not easily close, do not force. Recheck alignment as described in Step 2. 4 4 3 2 2 1 1 1 2 is 00963 1. Right sideplate 2. Right front docking point 3. Correct: sideplate fully engaged in docking point 4. Incorrect: sideplate NOT fully engaged in docking point Figure 1. Sideplate Must Fit into Docking Point Correctly REMOVAL 1. See Figure 2. To remove the rack, press the release button (8), and pull the rotary latch lever back. Carefully lift the rear of the rack up and pull the rack out of the front docking points

HARLEY DAVIDSON FLHR 2-UP RACK REMOVAL AND INSTALLATION MANUAL

0

Filed Under (Harley Davidson) by admin on 20-03-2011

download
INST ALLATION/REMOVAL 1. See Figure 1. While standing behind the motorcycle, place the front rack notches (1) into the front docking points (2). (Most of the rack, except a typical sideplate, has been removed for illustration purposes). 4 4 1 3 2 5 3 6 7 is03799 1. Front rack notches 2. Front docking points 3. Rotary latches 4. Rear docking points 5. Sideplates 6. Neck 7. Release button Figure 1. Attaching 2-Up Rack NOTE Rear docking points may be damaged if rotary latches and sideplates are not properly aligned. If the latch does not easily close, do not force. Check alignment as described in Step 2. 2. Pull the rotary latches (3) back into their rearmost position. Position the rear rotary latches over the rear docking points (4), making certain the latches and sideplates (5) fit into the neck (6) of the rear docking points. This may require some gentle squeezing or spreading of the sideplates or docking point brackets. 3. Push downward and close the rotary latches by pressing the latch lever as far forward as it will go. You will hear a click when the latch is in place. If the latch does not easily close, do not force. Recheck alignment as described in Step 2. 4. To remove the rack, press the release button (7), and pull the rotary latch lever back. Carefully lift the rear of the rack up and pull the rack out of the front docking points

HARLEY DAVIDSON Detachable Solo Racks removal and Installation instructions

0

Filed Under (Harley Davidson) by admin on 07-02-2011

download
installation/Removal 1. While standing behind the motorcycle, place the front rack notches into the front docking points as shown in step 1 of the diagram. (Most of the rack, except a typical sideplate, has been removed for illustration purposes). 1 CAUTION Rear docking points may be damaged if rotary latches and sideplates are not properly aligned. If the latch does not easily close, do not force. Check alignment as described in step 2. 2. Pull the rotary latches back into their rearmost position as shown in step 2 of the diagram. 3. Push downward and close the rotary latches by pressing the latch lever as far forward as it will go as shown in step 3. You will hear a click when the latch is in place. If the latch does not easily close, do not force . Recheck alignment as described in step 2. 4. To remove the rack, press the release button shown in the diagram, and pull the rotary latch lever back. Carefully lift the rear of the rack up and pull the rack out of the front docking points. Position the rear rotary latches over the rear docking points, making certain the latches and sideplates fit into the neck of the rear docking points as shown in the rear view of step 2. This may require some gentle squeezing or spreading of the sideplates. Attaching Solo Rack INSTRUCTIONS -J00256 REV. 8-30-96 Detachable Solo Racks ® i00627 Step 1:place front notches into front docking points Step 2: pull back rotary latches and lower rack onto rear docking points Step 3: close rotary latches by pushing latch fully forward Release button