Honda GL 1800 FOG LAMP INSTALLATION INSTRUCTIONS

0

Filed Under (Honda) by admin on 24-11-2011

download
Disconnect the negative cable from the battery before installing this accessory. • To prevent scalding, allow the engine and cooling system to cool before installing this accessory. • The memories of the tripmeter, clock, radio andbsuspension system will be erased when you disconnect the battery. Reset the memories after reconnecting the battery. • Tighten the screws, bolts and nuts securely. • Trim the excess ends off the wire ties after attaching them to the wire harnesses. Do not allow the cut part of the wire tie to interfere with another harness or brake pipe. Using cutting pliers, cut out the marked areas from the front lower cowl. Finish the edges of the holes smooth and flat with a file. 1. Disconnect the negative cable from the battery. 2. Remove the front lower cowl and bolts as described in the Service Manual.